Manual XU1 XJS-350U Jigsaw
Need a manual for your XU1 XJS-350U Jigsaw? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
SAFETY
INSTRUCTIONS
ALWAYS WEAR EYE, FACE
AND EAR PROTECTION
When operating the tool
Using an extension lead
ADDITIONAL SAFETY
INSTRUCTIONS FOR
JIGSAWS
Check that the switch is in the “OFF” position before
connecting to the power supply. Switch to “OFF”
immediately after completion of the task.
Keep the mains cable away from any moving parts or
accessories.
Never cover the ventilation slots in the tool.
Always use an approved extension lead suitable for
the power input of this tool. Before use, inspect the
extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always
unwind the lead completely. Use of an extension lead
not suitable for the power input of the tool or which is
damaged or defective may result in a risk of re and
electric shock.
The power supply for this product should be protected
by a residual current device (rated at 30mA or less).
A residual current device reduces the risk of electric
shock.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
Original Instructions
XJS-350U
350W
Jigsaw
The tool is recommended for use with
a residual current device with a rated
residual current of 30mA or less
• Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
• Remove all nails in the work piece before the
jigsaw. Cutting nails may damage your tool.
• Do no cut hollow pipe with the jigsaw
• Do not cut material thicker or wider diameter
than the specied limits.
• Always allow enough clearance underneath the
work piece to ensure the blade does not touch
the oor or work bench, etc.
• Do not cut though wall cavities without rst
checking for hidden electrical wires.
• Ensure that you have tightened the lade prior to
starting the machine.
• When you have nished the cut, wait until the
saw blade has stopped moving prior to removing
it from the work piece
• Do not touch the saw blade immediately after
use. Allow time for the blade to cool, as it may
burn due to the heat generated during sawing.
• Always check accessories to ensure that they
are suitable for the operating speeds of this tool.
• Incorrect accessories can break apart at high
speed and cause serious damage or injury.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge, unless
they have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Young children should be supervised to
ensure that they do not play with the appliance.
21
General Power Tool Safety
Warnings
WARNING! Read all safety
warnings and all instructions. Failure
to follow the warnings and instructions may
result in electric shock, re and/or serious
injury.
Save all warnings and instructions
for future reference. The term “power
tool” in all of the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is earthed
or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f. If operating a power tool in a damp location
is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you
are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in serious
personal injury.
b. Use personal protective equipment. Always
wear eye protection. Protective equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying
power tools with your nger on the switch or energising
power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in
personal injury.
e. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-related
hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe injury
within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the rate for
which it was designed.
b. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the
power tool accidentally.
d. Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a
qualied repair person using only identical
replacement parts. This will ensure that the safety
of the power tool is maintained.
Yang/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Jigsaw XJS-350U (XU1)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X
2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X
2011/65/EU
X
2006/42/EC
Annex IV
Notied Body:
Notied Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured L
WA
= dB (A); guaranteed L
WA
= dB (A)
P = KW; L/Ø = cm
Notied Body:
2012/46/EU
Emission No.:
Standard references: EN 60745-1; EN 60745-2-11;
EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 01.08.2017
First CE: 17 Archive-File/Record: NAPR017307
Art.-No.: 30.001.77 I.-No.: 11017 Documents registrar: R. Gehard
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
3000177_11017_XJS-350U.indd 135 01.09.2017 08:27:21
XU1 Power tools
XJS-350U 0917
Telephone: GB: 0151 294 4488 / IRL: 1850 882711
Electrical safety
This tool is double insulated; therefore no
earth wire is required.
Before you connect the charger to the mains supply
make sure that the data on the rating plate are identical
to the mains data.
Description of symbols
Wear eye protection
Double insulated (Protection Class II)
Danger! - Read the operating instructions to
reduce the risk of inquiry
Caution! Wear ear-muffs. The impact of noise
can cause damage to hearing.
Caution! Wear a breathing mask. Dust which
is injurious to health can be generated when
working on wood and other materials. Never use
the device to work on any materials containing
asbestos!
SOUND AND VIBRATION
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
Sound Pressure Level: 87.30 dB(A)
K
pA
Uncertainty: 3 dB
L
WA
Sound Power Level: 98.30 dB(A)
K
WA
Uncertainty: 3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Cutting wood
Vibration Emission Value a
h
: 7.96m/s²
K Uncertainty: 1.5m/s²
Cutting sheet metal
Vibration Emission Value a
h
: 9.0m/s²
K Uncertainty: 1.5m/s²
The specied vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specied value in
exceptional circumstances.
The specied vibration value can be used to compare
the equipment with other electric power tools.
The specied vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations
to a minimum.
•
Only use appliances which are in perfect working
order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
SERVICE INFORMATION
Please note that the following parts of this product are subject
to normal or natural wear and that the following parts are
therefore also required for use as consumables.
* Not necessarily included in the scope of delivery!
Category Example
Wear parts* Guide roller, Carbon brushes
Consumables* Saw blade
Missing parts
For EU countries only
Never place any electric power tools in your household
refuse.
To comply with European Directive 2012/19/EC concerning
old electric and electronic equipment and its implementation
in national laws, old electric power tools have to be separated
from other waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the
manufacturer, the owner of the electrical equipment must
make sure that the equipment is properly disposed of if he
no longer wants to keep the equipment. The old equipment
can be returned to a suitable collection point that will dispose
of the equipment in accordance with the national recycling
and waste disposal regulations. This does not apply to any
accessories or aids without electrical components supplied
with the old equipment.
Subject to technical changes
MAINTENANCE
Your tool has been designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance, switch off and
remove the electrical plug from the outlet.
• After each use, blow air though the tool housing to
ensure
it is free from all dust particles that may build up. Build up
of dust particles may cause the tool to overheat and fail.
• If the body of the tool requires cleaning do not use
solvents but moist soft only. Never let any liquid get
inside the tool; never immerse any part of the tool into
a liquid.
• When the carbon brushes wear out the tool with spark
and/or stop. The brushes are a wearing component
of the tool and should be replaced prior to the carbon
wearing out fully. Brushes will wear out after many uses
but before they do take the tool to an electrician or
power tool repairer for a quick and low cost replacement.
Always replace both brushes at the same time.
Note. Ozito Industries will not be responsible for any damage
or injuries caused by the repair of the tool by an unauthorised
person or by mishandling of the tool.
• If the supply cord of this power tool is damaged, it must
be replaced by a specially prepared cord available
through the service organization.
Loading…
Rating
Let us know what you think about the XU1 XJS-350U Jigsaw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your XU1 XJS-350U Jigsaw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact XU1. They might be able to provide an original manual. Are you looking for the manual of your XU1 XJS-350U Jigsaw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | XU1 |
| Model | XJS-350U |
| Category | Jigsaws |
| File type | |
| File size | 1.04 MB |
All manuals for XU1 Jigsaws
More manuals of Jigsaws
Frequently Asked Questions about XU1 XJS-350U Jigsaw
Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.
What materials can I use my jigsaw on? Verified
Because of the changable blades, Jigsaws can be used on almost all materials. Jigsaws are mostly used to saw curves and corners.
This was helpful (443) Read moreDo I need to wear eye protection when using a jigsaw? Verified
Yes. Small particles can fly up during sawing. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.
This was helpful (217) Read moreCan I store power tools in a shed or garage? Verified
In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.
This was helpful (65) Read moreDo I need to wear hearing protection when using a jigsaw? Verified
Yes you should. Although the amount of noise produced by a jigsaw can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.
This was helpful (45) Read more
Join the conversation about this product
Here you can share what you think about the XU1 XJS-350U Jigsaw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.