Home > Household appliances > Air Purifiers > Winix Air Purifiers > Winix XQ Pro Air Purifier

Manual Winix XQ Pro Air Purifier

Need a manual for your Winix XQ Pro Air Purifier? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

WHERE TO USE

12~18 in 12~18 in

Allow 12 ~ 18 in. of space between TVs, radios, and other

electronics

Electromagnetic interference from certain electronics may

cause product malfunction.

Place indoors away from direct sunlight

Direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

Flimsy or slanted surfaces may result in abnormal noise and

vibrations.

Allow 12 ~ 18 in. from walls for maximum air flow

Grill

Button Control Section

Display

CD Carbon Filter

Rear Panel

Side Vent

Pre-Filter

Front Panel

True HEPA Filter

Air Quality Indicator

(2) Pre-Filter

(2) CD Carbon Filters

(2) True HEPA Filters

Unit

User

Manual

Alexa Setup Guide /

Wi-Fi Setup Guide

MODEL PART DIAGRAM

DISPLAY

07 08

02 03 04 05

01 02 03 04 05 06 07

CONTROLS

01. Child Lock Indicator

LED light indicates whether Child Lock mode is

enabled or disabled.

02. Timer Indicator

If the timer has been set, the LED light indicates

the set time of operation.

03. Wi-Fi Indicator

Indicates whether Wi-Fi Mode is enabled or disabled.

01. Wi-Fi / Pairing Button

• A quick press will turn Wi-Fi on/off.

• A long press of 3 seconds will activate pairing mode.

• A Wi-Fi indicator will display on the front while

Wi-Fi is active.

02. Filter Life / Filter Reset Button

• A quick press will show the remaining filter

life; indicated on the front display (100 ~ 0%).

• A long press of 10 seconds will reset the filter

life indicator.

- Use when replacing the filters.

- Filter Reset Button can be used when the

power is turned off.

- The filter life will be reset to 100%.

03. Sleep Mode / Child Lock Button

• A quick press of the Sleep Mode / Child Lock

Button cycles the unit in order from Sleep

Mode

→

General Mode

→

Sleep Mode.

• In Sleep Mode, the Sleep Mode LED icon on

the front indicator dims to 50% brightness. All

other LEDs are turned off.

• If you press Sleep Mode / Child Lock Button

for 3 seconds, Child Lock will be initiated

and the buttons will not operate. A chime will

sound if pressed.

CONTROL PANEL

INITIAL OPERATION

Remove the front/rear panel by grasping its

upper edge and gently pulling forward.

- To remove the front/rear panel, release the

latch at the lower edge of the panel.

Remove the Pre-Filter, then the plastic bag

of filters behind it.

Remove filters from protective plastic bag.

Install the filters until they fit securely in

place.

03. True HEPA Filter (back)

02. CD Carbon Filter (middle)

01. Pre-Filter (front)

After filters are installed, close the front

panel.

Insert the power cord into an electrical

outlet.

Latch

When to Replace Filters

Filter Indicator Light When to Service When to Replace

Pre-Filter none Clean once every 14 days Permanent

CD Carbon Filter

Can NOT be WASHED Lasts Approx. 12 months

True HEPA Filter

• When the Check Filter Indicator LED is on, it is time to replace the True HEPA Filter and CD Carbon Filter.

• Intervals between filter replacement may vary depending on environment.

MAINTENANCE

CLEANING CARE

Cleaning the Filters:

Use a vacuum cleaner or soft brush to clean the

Pre-Filter

• If it is excessively soiled, rinse in room

temperature water.

• Do not use detergent or soap.

• Allow the filter to dry for 24 hours or more

before using.

• Intervals between filter cleaning may vary

depending on the air quality in the environment.

Cleaning the Smart Sensor:

Cotton

swab

Lens

Use a damp cotton

swab to wipe the

lens and intake area

of the Smart Sensor.

• To clean the sensor

area, use only

water. Do not use

volatile substances

such as alcohol or

acetone.

Wipe away any remaining moisture with a dry

cotton swab.

NOTICE

• Do not use benzene, alcohol, or other

volatile fluids, which may cause damage or

discoloration.

• Do not use hot water over 104

Cleaning the Exterior & Interior:

Open the front panel and clean the interior

with a vacuum cleaner.

• A handheld vacuum or hose attachment will

work best.

Dampen a cloth with room temperature water

and wipe down the interior and exterior of the

unit.

Wipe the unit down with a clean, dry cloth.

• Ensure no moisture remains before plugging

the unit back in.

* For optimal performance, clean every 1 - 2 months.

Cleaning the Top:

Grasp the back of

the grill and lift up.

Wipe the interior

and grill with a soft,

damp cloth.

To reinstall the grill,

insert the two front

tabs of the grill into

the corresponding

holes in the product.

NOTICE

• When cleaning the unit, always unplug the

power cord first and then wait until the unit

has cooled down.

• Never disassemble, repair, or modify this unit

yourself.

• Do not use flammable sprays or liquid

detergents.

• Do not allow children to clean or maintain the

unit.

• Before cleaning or maintaining, ensure unit is

unplugged.

REPLACING FILTERS

Resetting Filter Life:

After replacing your True HEPA Filter, place the Pre-Filter back in and close the Front

Panel. While the unit is on, hold the Filter Reset Button for at least 10 seconds until

you hear the beep. After the beep, the Filter Replacement Indicator will disappear. Your

Winix True HEPA is now reset.

04. Sleep Mode Indicator

Indicates whether Sleep Mode is enabled or disabled.

05. Filter Replacement Indicator

LED light indicates when it is time to change the filter.

06. Ultrafine Dust Density Indicator

• The LED Ultrafine Dust Density Indicator

displays the quality of air in your environment.

When the unit senses an air quality change,

it automatically adjusts the LED Indicator to

display the respective air quality.

• LED Numeric Smart Sensor displays air quality

measures fine particles down to 2.5 microns.

07. Mode Indicator

Indicates whether Auto & Fan Speed Mode is

enabled or disabled.

08. PlasmaWave

Indicator

Indicates whether PlasmaWave

is enabled or disabled.

04. PlasmaWave

Operation Button

• Turns the PlasmaWave

feature on/off.

• When the unit is running, you may hear a

chirping or buzzing sound. The sound is from

large particles passing through PlasmaWave

, it

is normal and does not signify product failure.

05. Timer Button

• A quick press of the Timer Button will set the timer.

• The timer can be set in hours, in the order of

0(default)

→

• The amount of time, in hours, is indicated on the

front numeric display.

• Timer Indicator displays when timer is in use.

06. Fan Speed Button

• Enables manual operation of the unit's fan

speeds.

• Press to cycle through and set the desired fan

speed (Auto, Low, Medium, High, Turbo).

• Auto Mode:

- Auto Mode automatically adjusts fan speeds

according to your indoor air quality. The fan

speed will adjust to low when air quality is good,

medium when fair, and to high when poor.

07. Power Button

• Turns the unit on or off.

• During the first 30 seconds of powering up, the

Air Quality Indicator will cycle through Blue,

Green, Amber and Red colors. Smart Sensor takes

approximately 4 minutes to detect the air quality in

the environment before normal operation begins.

True HEPA Filter

CD Carbon Filter

PlasmaWave

Pre-Filter

4-STAGE AIR PURIFICATION

Air Purification means it

removes inanimate particles

Rating

Let us know what you think about the Winix XQ Pro Air Purifier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Winix XQ Pro Air Purifier?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Winix XQ Pro Air Purifier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Winix XQ Pro Air Purifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Winix. They might be able to provide an original manual. Are you looking for the manual of your Winix XQ Pro Air Purifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Winix
Model	XQ Pro
Category	Air Purifiers
File type	PDF
File size	2.34 MB

All manuals for Winix Air Purifiers
More manuals of Air Purifiers

Frequently Asked Questions about Winix XQ Pro Air Purifier

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Does an air purifier also remove regular dust from the air? Verified

Yes, air purifiers also remove dust from the air that otherwise would need to be removed by dusting and cleaning. It depends on the air purifier up to what size of dust can be removed from the air.

This was helpful (172) Read more