Home > Household appliances > Air Purifiers > Winix Air Purifiers > Winix C545 Air Purifier

Manual Winix C545 Air Purifier

Need a manual for your Winix C545 Air Purifier? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

FRONT

PACKAGE CONTENTS

BACK

Control Panel

* For a Certiﬁed Refurbished Air Puriﬁer, there will be 4 New Carbon Filters and 1 True HEPA Filter included;

equivalent to a 1-year supply.

Front Panel

Air Outlet

Vent

Handle

Power Plug

Unit

(1) Pre-Filter

(8) Activated Carbon Filters

(2) True HEPA Filters

Alexa Setup Guide /

Wi-Fi Setup Guide

User

Manual

WHERE TO USE

MODEL PART DIAGRAM

12~18 in

Allow 12 ~ 18 in. of space between TVs, radios, and other

electronics.

Electromagnetic interference from certain

electronics may cause product malfunction.

Place indoors away from direct sunlight.

Direct exposure

may cause product malfunction or failure.

Only place on hard, flat surfaces.

Flimsy or slanted

surfaces may result in abnormal noise and vibrations.

Allow at least 12 ~ 18 in. from walls for maximum air flow

01. Auto Mode Indicator - The LED "Auto" light

will indicate when Auto Mode is activated.

02. Air Quality Indicator - Color coded LED

light indicates one of three levels of Air Quality:

Red (poor), Amber (fair), and Blue (good).

03. Fan Speed Indicator - Indicates the current

fan speed.

04. Sleep Mode Indicator - The LED "Sleep"

light will indicate when Sleep Mode is on.

05. Filter Replacement Indicator - LED light

indicates when it is time to change the filter.

06. Filter Reset Button - After replacing the

True HEPA Filter, use a small object such as a

paper clip, to press and hold the Filter Reset

Button for at least 5 seconds until the Filter

Replacement Indicator turns off.

07. Smart Sensor - Detects the amount of

odorous gas in the environment. When in Auto

mode, the fan speed adjusts according to the

detected amount of gas.

08. Power Button -

Turns the unit on or off.

During the first 30 seconds of powering up, the

Air Quality Indicator will cycle through Blue,

Amber and Red colors.

• Smart sensor takes approximately 4 minutes

to detect the air quality in the environment

before normal operation begins.

09-1. Fan Speed/Auto/Sleep Buttons -

Use the

Fan Speed arrow buttons to set the desired

fan speed. Fan Speeds cycle over in this

sequence: Auto, Low, Medium, High, Turbo,

Sleep, Auto.

Auto Mode:

Automatically adjusts fan speeds

according to your indoor air quality. The fan

speed will adjust to low when air quality is good,

medium when fair, and to high when poor.

Sleep Mode: When Sleep Mode is activated,

the Air Quality Indicator LED light is disabled.

• Fan speed will automatically set to minimum

speed (lower than 'Low') which will be

nearly silent. When Sleep Mode is active,

PlasmaWave

will be disabled, but it can be

turned back on.

09-2. PlasmaWave

Button - Press and hold

the buttons

+ for 3 seconds

Press the Plasmawave

button when the unit

is on to enable or disable this feature. By

default, PlasmaWave

is enabled whenever the

unit is powered on. When the unit is running,

you may hear a chirping or buzzing sound.

The sound is from large particles passing

through PlasmaWave

, it is normal and does

not signify product failure.

10. PlasmaWave

Indicator - Indicates

whether PlasmaWave

is enabled or disabled.

11. Wi-Fi Button -

Press for 3 seconds to

activate pairing mode. When Wi-Fi is paired,

press the button to turn Wi-Fi off or back on.

12. Wi-Fi Indicator -

Enables or disables the Wi-

Fi feature. When in the pairing state, the Wi-Fi

LED flashes. When paired successfully, the Wi-Fi

LED will be a solid white light.

13. Light Sensor - Detects the amount of

ambient light in the environment. When in Auto

Mode, the light sensor detects when to put the

unit into Sleep Mode.

Winix Smart Wi-Fi Setup - Refer to the Wi-Fi

Guide Guide provided inside the box.

CONTROL PANEL

07 08 09 11 13

02 03 04 05 0601

1210

When to Replace Filters

Filter Indicator Light When to Service When to Replace

Pre-Filter

none Every 14 days Permanent

Activated Carbon Filter

none

CAN'T BE WASHED

Every 3 months

True HEPA Filter

Lasts Approx.

12 months

• When the Check Filter Indicator LED is on, it is time to replace the Filter.

• Intervals between filter replacement may vary depending on environment.

MAINTENANCE

True HEPA Filter

Activated Carbon Filter

PlasmaWave

Pre-Filter

4-STAGE AIR PURIFICATION

INITIAL OPERATION

REPLACING FILTERS

CLEANING CARE

Cleaning the Filters:

Use a vacuum cleaner or soft brush to clean

the Pre-Filter.

• If it is excessively soiled, rinse in room

temperature water. Do not use detergent or

soap.

Allow the filter to dry for 24 hours or

more before using.

Intervals between filter

cleaning may vary depending on the air

quality. Do not use hot water over 104

F or

volatile fluids such as paint thinner.

Cleaning the Exterior & Interior:

Wipe with a soft damp cloth using room

temperature water.

• Afterwards, wipe it down with a dry cloth.

Open the front panel and clean the interior

with a vacuum cleaner.

• For optimal performance, clean every 1-2

months.

1712-0096-00

Resetting Filter Life:

After replacing your True HEPA Filter, place the Pre-Filter back in and close the Front Panel.

While the unit is on, hold the Filter Reset Button for at least 5 seconds until you hear the beep.

After the beep, the Filter Replacement Indicator will disappear. The True HEPA Filter is now reset.

Remove the front panel by grasping its upper edge

and gently pulling forward.

Remove the Pre-Filter, then the bag of filters behind it.

Remove filters from protective plastic bag.

Install the filters until they fit securely in place.

03. True HEPA Filter (back)

02. Activated Carbon Filter (middle)

01. Pre-Filter (front)

After filters are installed, close the front panel.

Insert the power cord into an electrical outlet.

Latch

NOTICE

• When cleaning the unit, always unplug the power cord

first and then wait until the unit has cooled down.

• Never disassemble, repair, or modify this unit yourself.

• Do not use flammable sprays or liquid detergents.

• Do not allow children to clean or maintain the unit.

• Before cleaning or maintaining, ensure unit is unplugged.

• Do not use benzene, alcohol, or other volatile fluids,

which may cause damage or discoloration

SPECIFICATIONS

Model

C545

Voltage

AC 120 V / 60 Hz

Power Rate

65W

Dimensions

13.7"W × 8.4"D × 20.5"H

Weight

11 lbs

Filter SKU Filter S: 1712-0096-00

Exterior design, and product specifications may be changed

without prior notice to improve product performance.

Contact Winix for product related inquiries and customer service

• Dedicated Call Center: (877) 699-4649

• Website: www.winixamerica.com

To expedite service, please specify the model name and number, the nature of the problem, your

contact information, and your address.

For Troubleshooting or Frequently Asked Questions, please visit: https://winixamerica.com/faq/

Air Purification means it

removes inanimate particles

Rating

Let us know what you think about the Winix C545 Air Purifier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Winix C545 Air Purifier?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Winix C545 Air Purifier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Winix C545 Air Purifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Winix. They might be able to provide an original manual. Are you looking for the manual of your Winix C545 Air Purifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Winix
Model	C545
Category	Air Purifiers
File type	PDF
File size	2.25 MB

All manuals for Winix Air Purifiers
More manuals of Air Purifiers

Frequently Asked Questions about Winix C545 Air Purifier

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Does an air purifier also remove regular dust from the air? Verified

Yes, air purifiers also remove dust from the air that otherwise would need to be removed by dusting and cleaning. It depends on the air purifier up to what size of dust can be removed from the air.

This was helpful (158) Read more