Home > Household appliances > Hobs > Whirlpool Hobs > Whirlpool ACM 702/NE Hob

Manual Whirlpool ACM 702/NE Hob

Need a manual for your Whirlpool ACM 702/NE Hob? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 1 comment and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Installation must be carried out by a qualified electrician

who is fully aware of current safety and installation

regulations. The manufacturer declines all liability for injury

to persons or animals and for damage to property resulting

from failure to observe the regulations provided in this

chapter.

Electrical connections

• Hob electrical connection must be made before

connecting the appliance to the electricity supply.

• Electrical connection must be carried out in compliance

with the regulations of the local electric utility company.

• Make sure that the voltage indicated on the rating plate

on the underside of the appliance corresponds to the

domestic power supply voltage.

• Regulations require that the appliance is earthed: use

conductors (including the earth conductor) of the

appropriate size only.

• For electrical connection, use an H05 RR-F type cable as

specified in the table “Power supply voltage”.

The power supply cable must be long enough

to allow the hob to be removed from the

worktop and must be positioned so as to avoid

damage or overheating caused by contact with

the base of the hob itself. Do not use extension leads.

Power supply voltage

If the hob already has a power cable, follow the

instructions given on the label attached to the

cable.

Connect the appliance to the electricity supply by

means of an all-pole disconnect switch with minimum

contact gap of 3 mm.

Connecting to the terminal board

Connect the yellow/green earth wire to the terminal with

the symbol . This wire must be longer than the other

wires.

1. Remove the terminal block cover (A), undoing the

screw and inserting the cover in the terminal block

hinge (B).

2. Strip approx. 70 mm of sheath from the power supply

cable.

3. Strip approx. 10 mm of sheath from the wires. Insert

the power supply cable into the cable clamp and

connect the wires to the terminal board as indicated in

the diagram next to the terminal board itself.

4. Secure the power cable with the cable clamp.

5. Close the cover (C) and screw it on the terminal block

with the removed screw - point (1).

Each time the cooktop is connected to the mains it

carries out an automatic check which lasts several

seconds.

INSTALLATION and ELECTRICAL CONNECTION

Wires Amount x size

230V ~ +

3 X 4 mm

230-240V ~ +

3 X 4 mm

(Australia only)

230V 3 ~ +

4 X 1.5 mm

400V 3N ~ +

5 X 1.5 mm

400V 2N ~ +

4 x 1.5 mm

230V

400V 3N ~ 230V ~

230-240V~FOR AU ONLY

230V~FOR UK ONLY

400V 2N ~

230V 3~

ONLY FOR BELGIUM

400V 2N~

FOR NL ONLY

Rating

Let us know what you think about the Whirlpool ACM 702/NE Hob by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Whirlpool ACM 702/NE Hob?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Whirlpool ACM 702/NE Hob. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Luc Lenaerts 09-03-2021
Is there no Dutch manual available?

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your Whirlpool ACM 702/NE Hob. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Whirlpool. They might be able to provide an original manual. Are you looking for the manual of your Whirlpool ACM 702/NE Hob in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Whirlpool
Model	ACM 702/NE
Category	Hobs
File type	PDF
File size	0.91 MB

All manuals for Whirlpool Hobs
More manuals of Hobs

Frequently Asked Questions about Whirlpool ACM 702/NE Hob

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Which pans can be used on an induction hob? Verified

In general all pans that are magnetic can be used on an induction hob. Almost all new pans are suited for induction.

This was helpful (1363) Read more

My hob has a power plug that doesn't fit a regular socket, what should I do? Verified

Many electric hobs (both ceramic and induction) have a different plug. This is because these appliances require a lot of power. Have the installation of the appliance done by a professional.

This was helpful (1284) Read more

Why does the ignition on my range make a clicking sound? Verified

If the range has ben cleaned with a lot of water, the knobs might have gotten wet, triggering the ignition. Let the knobs dry. If the problem persists you should contact the manufacturer.

This was helpful (1089) Read more

What does '6th Sense' mean? Verified

Whirlpool appliances that are equipped with 6th Sense technology have sensors that ensure optimal operation of the machine. For example in dryers, these sensors measure the moisture left in the wash and stops the machine when everything is completely dry.

This was helpful (756) Read more