Home > Audio, TV & Photo > Remote Controls > Vivanco Remote Controls > Vivanco UR 850 LCD Remote Control

Manual Vivanco UR 850 LCD Remote Control

Name: Vivanco UR 850 LCD Remote Control
Brand: Vivanco
SKU: UR 850 LCD
Rating: 100 (1 reviews)

Need a manual for your Vivanco UR 850 LCD Remote Control? Below you can view and download the PDF manual for free in English. This product currently has 6 frequently asked questions, 2 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

UR 850 LCD Universal Controller

Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: [email protected] 1

(GB) Operating Instructions

Vivanco UR 850 LCD remote control for

practically all TV, audio, video and other

infrared-controllable devices

Inserting the batteries

Open the battery compartment on the back of the

device, push the flap down lightly and insert 2 AA

alkaline batteries. Make sure that the polarity on the

batteries and in the battery compartment correspond

(thick spring = cell at bottom = -) and then close the

lid carefully. – Use undamaged batteries only.

Adapting to devices

In order to control your devices you must adapt or

set the remote control to them. There are two ways

of doing so: direct control code entry or code

search.

If the UR 850 LCD does not understand you it

displays ERROR and you can then repeat the entry.

Direct control code entry

Example: setting the remote control for a Philips TV

set:

1. Switch on your device, e.g. the TV, set to any

station.

2. To prepare code entry, briefly press the SET

button in the bottom right corner of the keypad, then

the required device button, e.g. TV. A brand and a

code number appear, see diagram.

– You cannot enter

a new code if you have activated the code entry lock.

3. Select the brand of your device, in this

example Philips, with  or . The first available

code in the device list is displayed.

4. Press a few buttons to determine whether you

have found a suitable code. When the code

corresponds to your device, press OK and the

setting for this device is completed.

5. If the code you have found does work at all or

not properly, try another code by selecting the next

code for the brand using the  or  button, then

test the code as described above under 4. and, if

successful, confirm with OK.

6. To set the remote control for other devices,

proceed in the same way. Instead of the TV device

button, press another button, e.g. VCR, CBL/SAT

(DVB-T, DECODER), DVD, TUNER, TAPE, CD,

AUX).

-Before setting a code and performing the subsequent test

for recording or playback devices, please insert a medium

(tape, CD, cassette, DVD, etc.).- You can interrupt code

entry at any time by pressing EXIT.

Code search

If the brand of your appliance is not in the list or

none of the codes given fits, we recommend the

automatic code search.

Your remote control finds the correct control settings

almost automatically in a few seconds:

1. Switch on the device to be controlled. For

example, a program number appears in the display

of your satellite receiver.

2. To start the code search, press and hold the

SET button for approx. 3 seconds. CODE SETUP

appears in the display. Confirm this function by

pressing OK.

3. DEV SEARCH then appears in the display.

Confirm this function by pressing OK.

– If DEV

SEARCH does not appear you can set the function with the

 or button.

4. Press the device button of the device to be

controlled, e.g. DVD and confirm the function by

pressing OK.

5. Then point the remote control at the device to

be controlled while the remote control emits a

different ON/OFF signal every 2 seconds. The

respective code number is shown in the display.

6. When your device reacts, press a few buttons

to determine whether you have found a suitable

code. If the code corresponds to your device, press

OK twice. SUCCESS appears in the display, then

you press the device button, e.g. DVD, to confirm

the entry. The setting for this device is now

completed.

7. If the code you have found does work at all or

not properly, press EXIT and DEV SEARCH

appears again. Then proceed again as described

under 3.

Please note: - You can reverse the search direction with the

 or  button if you have reacted too slowly to a response

from the device. – The Menu buttons cannot by used for

testing. - Before setting a code and performing the

subsequent test for recording or playback devices, please

insert a medium (tape, CD, cassette, DVD, etc.).- You can

interrupt code entry at any time by pressing EXIT.

Other settings

Setting the time

1 Press and hold SET for 3 seconds, then set

CONFIGURE with the  or  button. Confirm this

function by pressing OK.

2 TIME SETUP appears in the display. Confirm

this function by pressing OK.

3 Enter the time using the number buttons and

confirm with the OK button. Then press EXIT

several times to quit the setting mode.

Set priority volume control

With this function you can determine a device

exclusively for volume control, e.g. your audio

amplifier. Then the buttons VOL +, VOL – and

always control the amplifier, regardless of which

device you are controlling.

1 Press and hold SET for 3 seconds, then set

CONFIGURE with the  or  button. Confirm this

function by pressing OK

2 TIME SETUP appears in the display. Set VOL

LOCK with the  or  button. Confirm this function

by pressing OK.

3 Select the device button, e.g. AUX for the

amplifier and set priority=ON using the  or 

button. Confirm this function by pressing OK.

4 Then press EXIT several times to quit the

setting mode.

- You can cancel the priority setting using the same

procedure. Instead of ON, set OFF for all devices.

Rating

Let us know what you think about the Vivanco UR 850 LCD Remote Control by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vivanco UR 850 LCD Remote Control?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Vivanco UR 850 LCD Remote Control. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Minusvata 13-01-2020
Hello, I try to put a code from my LG and it does not work for me, I have tried several, is there any way to know? Thank you.

reply | This was helpful (1) (Translated by Google)

Minusvata 03-04-2021
I manage to connect with my loewe but it only lets me change the channels, the other functions do not connect

reply | This was helpful (1) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your Vivanco UR 850 LCD Remote Control. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vivanco. They might be able to provide an original manual. Are you looking for the manual of your Vivanco UR 850 LCD Remote Control in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vivanco
Model	UR 850 LCD
Category	Remote Controls
File type	PDF
File size	2.71 MB

All manuals for Vivanco Remote Controls
More manuals of Remote Controls

Frequently Asked Questions about Vivanco UR 850 LCD Remote Control

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I connect a universal remote control to my television? Verified

To connect your universal remote control, you need the model number and brand name of both the remote control and the television. There is a list of codes for brands and model numbers in the manual of the remote control .

This was helpful (7280) Read more

Why are there letters next to the numbers on the remote control? Verified

Certain television settings may require you to enter letters. There are usually three letters or other characters on a button. When letter input is required, you can press that button once for the first letter, press twice for the second letter and press 3 times for the third letter. This way, text can be written with a minimum number of buttons.

This was helpful (572) Read more

Will my remote control also work on other television models of the same brand? Verified

Often a remote control of a television will also work on similar models of the same brand. However, it is unusual that it will work on all models of that brand. Universal remote controls are more suited to do this.

This was helpful (416) Read more

What is the average range of an infrared remote control? Verified

An average infrared remote control had a range of around 3 to 6 meters. Also, the further away the device is, the harder it will be to aim.

This was helpful (358) Read more

A battery in my device is oxidized, can I still safely use it? Verified

Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (254) Read more

Can I leave a replacable battery in a device for a long time? Verified

Replacable batteries can remain in a device for a long time if the device is in use. When a device is being stored for a long time it is advisable to remove the batteries to prevent oxidation.

This was helpful (203) Read more