Home > Household appliances > Kettles > Vitinni Kettles > Vitinni JF07520300 Kettle

Manual Vitinni JF07520300 Kettle

Need a manual for your Vitinni JF07520300 Kettle? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Do not leave the appliance unattended whilst connected to the mains power supply.

Switch off the mains power supply and remove the plug by hand.

Always disconnect the appliance from the power supply before assembling,

disassembling or performing cleaning or maintenance.

Do not immerse the Kettle, power supply cord, power base or plug in water. Care

should be taken to avoid spillage on the electrical components, power connector,

power cord and plug.

Do not use any accessories or attachments with the appliance that have not been

supplied or recommended by the manufacturer.

CAUTION: Misuse of the appliance could cause injury – do not use the appliance

for anything other than its intended use

CAUTION: Hot surface. To avoid injury do not touch the hot or heated

surfaces of the Kettle. The heated surfaces and heating element may contain

residual heat and still be hot after use. Allow the Kettle to cool fully before moving or

handling.

WARNING: Do not open the lid while the water is boiling.

Boiling Water and Steam can be released from the kettle during use and can cause

serious injury, scalds and burns. Allow vigorous boiling to subside before removing

the kettle from the power base. Exercise caution when handling the kettle.

Do not overfill the kettle past the maximum mark. If the kettle is overfilled, boiling

water may be ejected

WARNING: Spillage on the connector can cause an electrical hazard. If spillage

occurs disconnect the power and let the power base dry thoroughly before re-use.

To avoid electrical hazards, the kettle should only be used with the power base

provided

BOIL DRY SENSOR

If the kettle is accidentally turned on whilst empty or boils dry during use, the boil dry

sensor will turn the kettle off until it has cooled sufficiently to resume normal

operation.

Do not try to use the kettle during this time – disconnect the power and allow the

kettle to cool

CARE AND MAINTENANCE

Unplug the Kettle from the mains power supply and allow to cool fully before

performing any cleaning or maintenance.

Never immerse the Kettle body, power cord, power base or plug in liquid or allow

moisture to contact these parts

Wipe the Kettle body and power base with a damp cloth and a small amount of mild

detergent

Rinse the inside of the Kettle with cool, clean water and use a damp cloth or brush to

remove any solid residue

Do not use harsh abrasives, cleaning detergents or scourers to clean the Kettle as

this could damage the finish

LIMESCALE REMOVAL

To maintain the performance and correct operation of your kettle it should be

descaled regularly. Mineral deposits from the water will form on the inside of the

kettle, especially in hard water areas.

To descale the kettle: use a commercially available descaling solution which is

suitable for use with kettles. Follow the instructions provided with the descaling

solution.

STORAGE

Ensure that the kettle is cool, clean and dry before storage. Wrap the excess power

cord loosely around the holder on the underside of the power base. Store in a cool,

dry place away from direct sunlight.

SPECIFICATIONS

Model: D2818E

Rated voltage: 220-240V~

Frequency: 50/60Hz

Rated Power: 1850-2200W

Capacity: 1.7L

Download manual in English (PDF, 0.57 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Vitinni JF07520300 Kettle by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vitinni JF07520300 Kettle?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vitinni JF07520300 Kettle. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vitinni JF07520300 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vitinni. They might be able to provide an original manual. Are you looking for the manual of your Vitinni JF07520300 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vitinni
Model	JF07520300
Category	Kettles
File type	PDF
File size	0.57 MB

All manuals for Vitinni Kettles
More manuals of Kettles

Frequently Asked Questions about Vitinni JF07520300 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the sieve for in my kettle? Verified

This is to catch any loose limescale that might have accumulated over time.

This was helpful (492) Read more

The kettle does not finish and keeps on boiling, what should I do? Verified

In many cases the lid of the kettle was not closed properly. If heat is allowed to escape, the kettle will keep on boiling. If this does not solve the problem you should contact the manufacturer or a mechanic.

This was helpful (327) Read more

Can I boil less than the minimim amount of water? Verified

No. When boiling less than the minimum amount of water, the temperature sensor might malfunction. This might prevent the kettle from switching off at boiling point, resulting in possibly dangerous situations.

This was helpful (150) Read more

Is it efficient to fill a kettle with hot water from the faucet? Verified

No. To get warm water to the faucet it is often needed to let cold water out first, which will be wasted. Also, the pipes will fill the same amount of hot water which will not be used and will cool, which leads to energy loss. Therefor it is better to fill a kettle with cold water.

This was helpful (98) Read more