Home > Camping & Outdoor > Tents > Vango Tents > Vango Dunkeld 600 Tent

Manual Vango Dunkeld 600 Tent

Need a manual for your Vango Dunkeld 600 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS – DUNKELD (UK)

FLYSHEET FIRST PITCHING

 Assemble poles and lay them on the ground

 Open out flysheet and position in required direction

 Locate pole sleeves on the flysheet and insert poles. The

poles are colour coded to the pole sleeves.

 Locate one end of each pole at one side of the tent into the metal pin system attached to the groundsheet

 Make sure poles locate into correct pin system, all poles follow corresponding flysheet seams to pin system

 Push poles into an arch from opposite ends and locate pole ends into corresponding metal pin

 Tighten all the tensions straps at the base of the poles.

 Securely peg out the rear corners of the tent

 Ensure the tent is in a straight line

 Peg out the remaining poles and pegging points using pin pegs at the base of poles

 Attach all flysheet pole clips onto poles

 Peg out ALL guy lines using pin-pegs ensuring that guy line fabric attachment points are evenly tensioned.

PRE-ATTACHED FRONT EXTENSION

 To erect the pre-attached canopy, insert the pole into the sleeve, connect to Ring and Pin system, tighten the tension

straps and attach pole clips to pole.

 Pull canopy away from tent until roof of canopy is taut

 Peg out ALL guy lines using pin-pegs ensuring that guy line fabric attachment points are evenly tensioned.

INNER ATTACHMENT

 Suspend the inner by attaching toggles of inner tent through rings on inside of flysheet

 Do the rear first and work forward

 It is advisable to remove the inner when taking down the tent when wet.

TENSION BAND SYSTEM:

 Remove Tension Band System from pockets and attach into the corresponding clips at the apex of the pole

 Adjust the straps until they are taut

 DO NOT OVERTENSION. Excess tension will alter the shape of the tent

 Tension bands are designed to stabilise the tunnel structure of the tent

 The bands are not required to be used in calm weather

RING & PIN SYSTEM

 Locate one end of pole onto the corresponding metal pin (figure 1)

 Peg the corners of the tent through the metal rings using pin-pegs (figure 2)

 Pegs should be positioned at a 45 degree angle to ensure maximum grip

AUFBAUANLEITUNG– DUNKELD (DE)

MIT AUßENZELTAUFBAU ZUERST

 Stecken Sie die Stangen zusammen und legen Sie sie auf den Boden

 Außenzelt auslegen und korrekt ausrichten.

 Fixieren Sie die Stangenhüllen am Überdach und setzen Sie die Stangen ein. Die Stangen und Stangenhüllen sind farblich

gekennzeichnet.

 Befestigen Sie ein Ende jeder Stange auf einer Seite des Zelts in dem an der Bodenplane befestigte Metallstiftsystem.

 Achten Sie darauf, dass die Stangen in das korrekte Stift-System eingesteckt werden; alle Stangen verlaufen an den

zugehörigen Außenzeltnähten entlang zum Stift-System.

 Schieben Sie die Stangen von den gegenüberliegenden Seiten in eine gewölbte Form und stecken Sie die Stangenenden in

die zugehörigen Metallstifte ein.

 Alle Spanngurte unten an den Stangen fest anziehen.

 Stecken Sie die hinteren Ecken des Zelts fest aus.

 Achten Sie darauf, dass sich das Zelt in einer geraden Linie ausgerichtet befindet.

 Übrige Stangen und Verankerungspunkte mithilfe der Stiftheringe unten an den Stangen fixieren.

 Befestigen Sie alle Außenzelt-Halterungsklemmen an den Stangen.

 ALLE Abspannleinen mit Stiftheringen fixieren, wobei darauf zu achten ist, dass die Befestigungspunkte der Abspannleinen

an der Plane gleichmäßig festgezogen sind.

VORBEFESTIGTES VORZELT

 Um das vorbefestigte Vordach aufzustellen, setzen Sie die Stange in die Hülle ein, verbinden Sie sie mit dem

Ring-und-Stift-System, straffen Sie die Spannungsbänder und befestigen Sie die Stangenclips an der Stange.

 Ziehen Sie das Vordach vom Zelt weg bis das Dach des Vordachs gespannt ist

 ALLE Abspannleinen mit Stiftheringen fixieren, wobei darauf zu achten ist, dass die Befestigungspunkte der

Abspannleinen an der Plane gleichmäßig festgezogen sind.

INNENBEFESTIGUNG

Rating

Let us know what you think about the Vango Dunkeld 600 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Dunkeld 600 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Dunkeld 600 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Dunkeld 600 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Dunkeld 600 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Dunkeld 600
Category	Tents
File type	PDF
File size	0.24 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Dunkeld 600 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more