Home > Camping & Outdoor > Tents > Vango Tents > Vango Da Vinci 400 Tent

Manual Vango Da Vinci 400 Tent

Need a manual for your Vango Da Vinci 400 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS- DA VINCI SIDE AWNING (UK)

Flysheet First Pitching

 Assemble poles and lay them on the ground

 Insert all poles through the pole sleeves on outside of fly sheet

 Locate one end of each pole at one side of the tent into the metal pin system attached to the groundsheet

 Push poles into an arch from opposite ends and locate pole ends into corresponding metal pin

 Tighten all the tensions straps at the base of the poles.

 Position the open end of the awning toward the tent

 Secure in position by pulling the guylines attached to the side awning roof over the roof of the tent and pegging on the

opposite side of the tent

 Peg out awning base at contact point with the tent and then the front of the awning to tension the material

 Peg out front of awning

 Peg out the remaining poles and pegging points using pin pegs at the base of poles

 Attach all flysheet pole clips onto poles

 Peg out ALL guy lines using pin-pegs ensuring that guy line fabric attachment points are evenly tensioned.

 Vango awnings are designed for use in lowland, sheltered campsites. Do not pitch in high winds or exposed campsites

AUFBAUANLEITUNG– DA VINCI SIDE AWNING (DE)

Mit Außenzeltaufbau zuerst

 Stecken Sie die Stangen zusammen und legen Sie sie auf den Boden

 Stecken Sie alle Stangen durch die Gestängekanäle an der Außenseite des Außenzelts ein.

 Befestigen Sie ein Ende jeder Stange auf einer Seite des Zelts in dem an der Bodenplane befestigte Metallstiftsystem.

 Schieben Sie die Stangen von den gegenüberliegenden Seiten in eine gewölbte Form und stecken Sie die Stangenenden in

die zugehörigen Metallstifte ein.

 Alle Spanngurte unten an den Stangen fest anziehen.

 Positionieren Sie das offene Ende des Vorzelts in Richtung des Zelts

 Sichern Sie es in seiner Position, indem Sie die Spannschnüre, die an der Seite des Daches des Vorzelts befestigt sind,

über das Dach des Zelts ziehen und sie an der gegenüberliegenden Seite des Zelts befestigen

 Befestigen Sie die Unterseite des Vorzelts am Befestigungspunkt mit dem Zelt und dann die Vorderseite des Vorzelts, um

das Material zu spannen.

 Stützen Sie die Vorderseite des Vorzelts ab.

 Übrige Stangen und Verankerungspunkte mithilfe der Stiftheringe unten an den Stangen fixieren.

 Befestigen Sie alle Außenzelt-Halterungsklemmen an den Stangen.

 ALLE Abspannleinen mit Stiftheringen fixieren, wobei darauf zu achten ist, dass die Befestigungspunkte der Abspannleinen

an der Plane gleichmäßig festgezogen sind.

 Vango Vorzelte werden konzipiert, um auf tiefliegenden, geschützten Campingplätzen verwendet zu werden. Stellen Sie

sie nicht in starkem Wind oder auf ungeschützten Campingplätzen auf.

CONSIGNES DE MONTAGE– DA VINCI SIDE AWNING (FR)

Montage en commençant par le double toit

 Rassembler les arceaux et les poser sur le sol

 Passer tous les mâts par les manches à l'extérieur du double toit

 Rapprocher les bouts de chaque mât pour former un arc et situer les bouts dans les chevilles correspondantes

 Reserrer toutes les sangles de tension en bas de chaque mât

 Positionner l'extrémité ouverte de l'auvent vers la tente

 Sécuriser la position en tirant sur les cordes de tension attachées sur le côté du toit de l'auvent, pour les passer au-dessus

du toit de la tente, et les fixer à des piquets, sur le côté opposé de la tente

 Etendre la base de l'auvent, à son point de fixation avec la tente, puis l'avant de l'auvent pour tendre le matériel

 Etendre l'avant de l'auvent

 Planter le reste des piquets, en utilisant les points de piquetage en bas des mâts

 Attacher aux mâts tous les crochets des mâts du double toit

 Planter tous les cordes d'ancrage avec des piquets, en s'assurant que les points d'attache soient sous tension égale

 Les auvents Vango sont conçus pour être utilisés en plaine, sur des campings abrités

Rating

Let us know what you think about the Vango Da Vinci 400 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Da Vinci 400 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Da Vinci 400 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Da Vinci 400 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Da Vinci 400 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Da Vinci 400
Category	Tents
File type	PDF
File size	0.25 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Da Vinci 400 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more