Home > Camping & Outdoor > Tents > Vango Tents > Vango Ark 200+ Tent

Manual Vango Ark 200+ Tent

Need a manual for your Vango Ark 200+ Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS – ARK+(UK)

FLYSHEET FIRST PITCHING:

 Assemble the three poles and lay them parallel on the ground. One pole will be shorter

that the other two.

 Open out flysheet and position in required direction

 Insert the pole through the pole sleeves on the outside of the flysheet

 Locate one end of each pole on one side of flysheet into metal pin system at the end

of each of the pole sleeves. Push poles into an arch from opposite ends and locate

pole ends into corresponding metal pin.

 Start pegging out the main corners at one end of the tent using the pin pegs provided.

 Pull the tent forward until taut and peg out the main corners at the other end of the

tent, again with the pin pegs

 Ensure the tent is in a straight line

 Secure the tent using the pin pegs through the ring & pin system – see diagram below.

 Peg out ALL guy lines, ensuring that they are in line with the seam they are attached to.

Pole guylines should be pegged at an angle towards front, and back, of tent, to tension

roof panel.

INNER FIRST PITCHING:

 Open inner on ground and position in desired direction.

 Starting from the rear corners of the tent, attach the elasticated hooks on the groundsheet to corresponding rings on the flysheet anchor

straps. Suspend the inner by attaching elastic loops of inner tent with clips on inside of flysheet.

 Attach hooks on porch groundsheet to corresponding rings on base of flysheet

………………………………………………………………………………………………………………………………………………………………………………………….....

AUFBAUANLEITUNG – ARK+(DE)

MIT AUßENZELTAUFBAU ZUERST:

 Stecken Sie die drei Stangen zusammen und legen Sie sie parallel zueinander auf den Boden. Eine Stange ist kürzer als die beiden anderen.

 Außenzelt auslegen und korrekt ausrichten.

 Führen Sie die Stange durch die Stangenhüllen an der Außenseite des Überdachs ein.

 Fixieren Sie ein Ende jeder Stange an einer Seite des Überdachs mit dem Metallstift-System am Ende jeder Stangenhülle. Drücken Sie die

Stangen gewölbeförmig von den gegenüberliegenden Enden aus hoch und fixieren Sie die Stangenenden mit den dazu passenden

Metallstiften.

 Beginnen Sie damit die Hauptecken an einem Ende des Zelts auszustecken, indem Sie das vorhandene Ring-und-Stift-System benutzen.

 Ziehen Sie das Zelt nach vorne, bis es gespannt ist und stecken Sie die Hauptecken am anderen Ende des Zelts wiederum mit den

Arretierstiften aus.

 Achten Sie darauf, dass sich das Zelt in einer geraden Linie ausgerichtet befindet.

 Sichern Sie das Zelt durch das Ring-und-Stift-System mit den Arretierstiften - Diagramm unten.

 Spannen Sie ALLE Spannschnüre um sicherzustellen, dass sie sich in einer Linie mit der Naht befinden, mit der sie befestigt sind. Die

Spannschnüre der Stangen sollten an einer Ecke der Vorder- und Rückseite des Zelts befestigt werden, um das Dach zu spannen.

INNENZELT-ZUERST-AUFBAU:

 Breiten Sie das Innenzelt auf dem Boden aus und positionieren Sie es in der gewünschten Richtung.

 Von den hinteren Ecken des Zeltes ausgehend, befestigen Sie die elastischen Haken an der Bodenplane mit den passenden Ringen an den

Verankerungsschnüren des Überdachs. Hängen Sie das Innenzelt ein, indem Sie die Gummibänder des Innenzelts mit Clips an der

Innenseite des Überdachs befestigen.

 Befestigen Sie die Haken an der Bodenplane des Vorbaus an den passenden Ringen an der Unterseite des Überdachs.

INSTRUCTIONS DE MONTAGE – ARK+(FR)

MONTAGE EN COMMENÇANT PAR LE DOUBLE TOIT:

 Assembler les trois arceaux et les poser au sol, parallèlement. Un arc eau sera plus court que les deux autres.

 Déferler le double toit et orienter dans le sens requis

 Insérer les arceaux dans les fourreaux d'arceau, à l'extérieur du double toit.

 Placer une extrémité de chaque arceau, sur un des côtés du double toit, dans le système de verrouillage en métal, à l'extrémité de

chacun des fourreaux d'arceau. Pousser les arceaux à l'intérieur d'une arche, depuis les extrémités opposées et placer les extrémités des

arceaux dans leurs systèmes de verrouillage en métal respectifs.

 Commencer à attacher les coins principaux, à une extrémité de la tente, à l'aide des piquets fournis.

 Tirer la tente vers l'avant, jusqu'à ce qu'elle soit droite, et attacher les coins principaux à l'autre extrémité de la tente, à l'aide des piquets.

 S'assurer que la tente soit montée en ligne droite

 Sécuriser la tente, grâce aux piquets utilisés avec le système ring & pin – voir le graphique ci-dessous.

 Attacher TOUTES les cordes de tension, en s'assurant qu'elles sont alignées avec la couture à laquelle elles sont attachées. Les cordes de

tension de l'arceau devraient être attachées selon un angle dirigé vers l'avant et l'arrière de la tente, afin de tendre le panneau du toit.

MONTAGE EN COMMENÇANT PAR LA TENTE INTÉRIEURE:

 Ouvrir l'intérieur sur le sol et positionner dans la direction voulue.

 En commençant par les coins arrière de la tente, attacher les crochets munis d'élastiques, placés sur le tapis de sol, aux anneaux

correspondants, placés sur les bandes d'ancrage du double toit. Suspendre la tente intérieure en attachant les sangles élastiques de la

tente intérieure aux clips placés à l'intérieur du double toit.

 Attacher les crochets placés sur le tapis de sol du porche aux anneaux correspondants, sur la base du double toit.

Rating

Let us know what you think about the Vango Ark 200+ Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Ark 200+ Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Ark 200+ Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Ark 200+ Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Ark 200+ Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Ark 200+
Category	Tents
File type	PDF
File size	0.13 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Ark 200+ Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more