CLOCK SETTING
1
*
*
4
2
5
6
7
8
Press the key to begin the clock setting. The symbol will appear.
Before proceeding with the clock setting and programming for the first time,
press the key.RESET ( )
Select the current day using the or key.
Press the key
Select the current hour using the or key
Press the key
Select the current minute using the or key
9
10
3
Press the key
Set the seconds to zero by pressing either the or key
Press the key to finish the clock setting
To set the clock, first check to see that the display is
in the clock mode ( ). If the display does not
show , press either the or key until
the clock mode ( ) is displayed.
For proper operation, ensure the clock is set to the correct time.
GETTING STARTED
button placements
display
1
2
3
4
ON/OFF – manual on/off control
RESET ( ) – reset
5
CD – activates countdown timer
6
RANDOM – activates random function
– scrolls through selections
6
SET – activates set function
To toggle between 12 or 24 hour format, press the key during clock setting
SET
SET
RANDOM
SET
SET
SET
If you are using the 12 hour format and you are setting an afternoon or evening time,
ensure that the symbol appears on the left.PM
Programmable Digital Timer
SE-11P
OWNER’S
MANUAL
Please take the time to read
and understand this manual
so you can begin to enjoy
the convenience and energy
saving benefits this product
has to offer.
FEATURES
!
!
!
!
!
!
14 ON settings /
14 OFF settings
Programs can be set to
operate on a specific day,
Monday to Friday,
Monday to Saturday,
Saturday and Sunday, or
everyday of the week
Countdown timer
Random function
12/24 hour clock
15A, 1800W (resistive);
600W (tungsten)
R
R
SET
PAGE 1 PAGE 2 PAGE 3
ON/OFF
RANDOM
PROG
CD
SET
R
Set
Weekday indicator
Random
Time display
Clock Countdown Program ON/OFF indicator
Program disable
DST indicator
PM indicator
This timer allows you to disable any particular program, or if you have more than one
program set, you can disable all of them at once using the function.master disable
PROGRAM DISABLE
To disable a single program, select the program of choice by using the
or key.
When a program is disabled, the time settings are stored in memory so that when you
re-enable the programs, the timer will resume with the same programs as before.
SINGLE PROGRAM DISABLE
1
NOTE: You will need to disable both the ON and OFF setting of the
program to completely disable that particular program.
2
Press the key
3
Press the key to disable the program. An symbol will appear to
indicate that the particular setting has been disabled.
X
4
Press the key 3 times to exit.
EXAMPLE:
You wish to disable PROGRAM 2 only.
The symbol will appear and the day(s) will be blinking.
PAGE 9
SET
ON/OFF
SET
If this was the ON setting that was disabled, now proceed to disable the OFF setting
of the same program to completely disable that particular program; or if you had
disabled the OFF setting first, now go to the ON setting.
PROGRAM DISABLE
Select the OFF setting of the same program by using the or key.
1
2
Press the key
3
Press the key to disable the program. An symbol will appear to
indicate that the particular setting has been disabled.
X
4
Press the key 3 times to exit.
EXAMPLE:
You wish to disable PROGRAM 2 only.
The symbol will appear and the day(s) will be blinking.
You have now successfully disabled PROGRAM 2.
*
To the particular program, repeat the above steps for the ON and
OFF settings. The symbol will indicating that the program has
been re-enabled (returned to normal).
re-enable
X disappear
PAGE 10
ON/OFF
SET
PROGRAM DISABLE
To perform the , go to the clock mode ( ) by using the
or key.
master disable
MASTER PROGRAM DISABLE
1
2
Press the key
3
Press the key to disable the program. An symbol will appear to
indicate that programs have been disabled.
X
all
4
Press the key 4 times to exit.
The symbol will appear and the day will be blinking.
If you have more than one program set, and you wish to disable of them at once,
you can do so by using the function.
all
master disable
*
To the programs, repeat the above steps. The symbol will
indicating that all the programs have been re-enabled (returned to
normal).
re-enable X
disappear
You have now successfully disabled ALL programs.
PAGE 11
SET
SET
ON/OFF
6
LED – lights up when the power is ON
7
6
3
ON/OFF
RANDOM
PROG
CD
SET
R
2
4
5
1
7
Join the conversation about this product
Here you can share what you think about the UPM SE-11P Time Switch. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.