Home > Watersports & Boats > Snorkels > TUSA Snorkels > TUSA SP-170 Platina II Hyperdry Snorkel

Manual TUSA SP-170 Platina II Hyperdry Snorkel

Name: TUSA SP-170 Platina II Hyperdry Snorkel
Brand: TUSA
SKU: SP-170 Platina II Hyperdry
Rating: 100 (1 reviews)

Need a manual for your TUSA SP-170 Platina II Hyperdry Snorkel? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

2. To loosen the strap

As shown in illustratoin 4, pull the

strap on the inside in the direction

shown by the arrow while pinching

buckle buttons.

MASK CLEARING

When water enters the mask while swimming on the surface,

water can be easily drained by simply lifting the mask from the

face. However, when swimming under water, it is necessary to

perform the “mask clearing” by sending air into the mask through

the nose.

Clearing an Ordinary Mask

For ordinary masks, tilt your head back and slightly lift only the

bottom of the mask while exhaling air into the mask through the

nose in order to purge water.

Water will not drain properly if air is blown into the mask with

excessive force. Take care to send air into the mask slowly at a

measured pace.

Clearing a Mask with Purge Valve

Since the purge valve is located at the lowest point of the frame,

tilt the head slightly to the front or left (M-21) to collect water

around the purge valve, and send a stream of slow and steady air

through the nose. It is not necessary to lift the mask while purging

with this procedure, however slightly pressing the mask against

the face while blowing will assist the purge process.

WEARING THE MASK

When putting on the mask, brush away hair caught between the

silicone skirt and face. Hair trapped

under the skirt is the most frequent

cause of water leakage.

Adjusting the Strap Length

1. To tighten the Strap

As shown in illustration 1, pull the

strap toward the outside in the

direction shown by the arrow.

2. To loosen the Strap

As shown in illustration 2, pull the

strap on the inside in the direction

shown by the arrow while pulling the

buckle lever with your fingertip.

Adjusting the Strap Length

(M-17, M-28)

1. To tighten the strap

As shown in illustration 3, pull the

strap toward the outside in the

direction shown by the arrow.

( Illustration 1 )

( Illustration 2 )

( Illustration 3 )

( Illustration 4 )

Attaching the Snorkel to the Mask

Insert the mask strap while pushing the

bottom of the snorkel adapter upward

from the inside. Make sure that the strap

is not twisted.

To remove the snorkel from the mask,

follow the steps in reverse

order.(Photograph 1)

( Photograph 1 )

Rating

Let us know what you think about the TUSA SP-170 Platina II Hyperdry Snorkel by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the TUSA SP-170 Platina II Hyperdry Snorkel?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the TUSA SP-170 Platina II Hyperdry Snorkel. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your TUSA SP-170 Platina II Hyperdry Snorkel. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact TUSA. They might be able to provide an original manual. Are you looking for the manual of your TUSA SP-170 Platina II Hyperdry Snorkel in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.