Home > Do-It-Yourself > Belt Sanders > Trotec Belt Sanders > Trotec PBSS 10-600 Belt Sander

Manual Trotec PBSS 10-600 Belt Sander

Need a manual for your Trotec PBSS 10-600 Belt Sander? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

8 EN

belt sander PBSS 10-600

Technical data

Parameter Value

Model PBSS 10-600

Mains connection 1/N/PE ~ 230–240 V/

50Hz

Power input 600 W

Belt speed 170–250m/min

Idle speed 1,450 – 2,120 rpm

Dimensions of the abrasive belt

(width x length)

75x457mm

Grinding surface 75x130mm

Cable length 4 m

Protection class

II /

Weight 2 kg

Vibration information according to EN62841-2-4

Vibration emission value main

handle a

1.863 m/s²

Vibration emission value front

handle a

2.399 m/s²

Uncertainty K 1.5 m/s²

Sound values according to EN62841-2-4

Sound pressure level L

88.6dB(A)

Sound power L

99.6dB(A)

Uncertainty K 3 dB

Wear hearing protection.

Excessive noise can lead to hearing loss.

Information on noise and vibration:

• The specified total vibration and noise emission values

were measured by means of a test procedure standardized

in EN62841 and can be consulted for the comparison of

one power tool with another.

• The specified total vibration and noise emission values

can also be used for preliminary load assessment.

Caution

Vibration emissions can cause a health hazard if the

device is used for an extended period of time or if it is

not properly handled and maintained.

• The actual vibration and noise emission may differ from

the stated values during operation of the power tool. This

depends on how the power tool is used and especially on

the type of workpiece being processed. Try to keep the

vibration load to a minimum. Exemplary measures for

reducing the vibration load include wearing gloves during

operation of the tool and the limitation of working hours.

All parts of an operating cycle must be considered for this

(e.g. times at which the power tool is switched off and

times when it is switched on but runs without load).

Transport and storage

Note

If you store or transport the device improperly, the

device may be damaged.

Note the information regarding transport and storage of

the device.

Transport

Before transporting the device, observe the following:

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Allow the device to cool down.

• If attached, disconnect the dust extraction system from the

device.

Storage

Before storing the device, observe the following:

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Allow the device to cool down.

• If attached, disconnect the dust extraction system from the

device.

• Clean the device as described in the Maintenance chapter.

When the device is not being used, observe the following

storage conditions:

• Dry and protected from frost and heat

• Ambient temperature below 45°C

• protected from dust and direct sunlight

Rating

Let us know what you think about the Trotec PBSS 10-600 Belt Sander by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Trotec PBSS 10-600 Belt Sander?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Trotec PBSS 10-600 Belt Sander. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Trotec PBSS 10-600 Belt Sander. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Trotec. They might be able to provide an original manual. Are you looking for the manual of your Trotec PBSS 10-600 Belt Sander in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Trotec
Model	PBSS 10-600
Category	Belt Sanders
File type	PDF
File size	2.25 MB

All manuals for Trotec Belt Sanders
More manuals of Belt Sanders

Frequently Asked Questions about Trotec PBSS 10-600 Belt Sander

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Do I need to wear hearing protection when using a sander? Verified

Yes you should. Although the amount of noise produced by a sander can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (9) Read more

Do I need to wear eye protection when using a sander? Verified

Yes. Small particles can fly up during sanding. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.

This was helpful (8) Read more

Do I need to wear a dust mask when using a sander? Verified

Yes. Dust is released during sanding which can cause respiratory damage. Some surfaces can also release chemicals like paint or varnish during sanding. These are also a good reason to wear a dust mask.

This was helpful (7) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more