Home > Garden & Terrace > Hedgecutters > Tanaka Hedgecutters > Tanaka TCH 22EAP2 (50ST) Hedgecutter

Manual Tanaka TCH 22EAP2 (50ST) Hedgecutter

Need a manual for your Tanaka TCH 22EAP2 (50ST) Hedgecutter? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

English

○ Empty the fuel tank before storing the unit/

machine. It is recommended that the fuel be

emptied after each use. If fuel is left in the tank,

store so fuel will not leak.

○ Store unit/machine and fuel in area where fuel

vapors cannot reach sparks or open ﬂ ames

from water heaters, electric motors or switches,

furnaces, etc.

WARNING

Fuel is easy to ignite or get explosion or

inhale fumes, so that pay special attention

when handling or ﬁ lling fuel.

Cutting safety

○ Do not cut any material other than plant hedge.

○ Inspect the area to be cut before each use.

Remove objects which can be thrown or become

entangled.

○ For respiratory protection, wear an aerosol

protection mask when cutting the grass after

insecticide is scattered.

○ Keep others including children, animals,

bystanders and helpers outside the 15 m hazard

zone. Stop the engine immediately if you are

approached.

○ Hold the unit/machine ﬁ rmly with both hands.

○ Keep ﬁ rm footing and balance. Do not over-

reach.

○ Keep all parts of your body away from the muﬄ er

and cutting attachment when the engine is

running.

○ Keep cutting tool below shoulder level. NEVER

operate unit from a ladder, while in a tree or from

any unstable support.

○ When relocating to a new work area, be sure to

shut oﬀ the machine and ensure that all cutting

attachments are stopped.

○ Never place the machine on the ground when

running.

○ Always carry a ﬁ rst-aid kit when operating any

power equipment.

○ Never start or run the engine inside a closed

room or building and/or near the inﬂ ammable

liquid. Breathing exhaust fumes can kill.

Maintenance safety

○ Maintain the unit/machine according to

recommended procedures.

○ Disconnect the spark plug before performing

maintenance except for carburetor adjustments.

○ Keep others away when making carburetor

adjustments.

○ Use only genuine Tanaka replacement parts as

recommended by the manufacturer.

○ When the hedge trimmer is stopped for servicing,

inspection or storage, shut oﬀ the power source,

disconnect the spark plug wire from the spark

plug and make sure all moving parts have come

to a stop.

Allow the hedge trimmer to cool before making

any inspection, adjustment, etc.

Transport and storage

○ Carry the unit/machine by hand with the engine

stopped and the muﬄ er away from your body.

○ Allow the engine to cool, empty the fuel tank,

and secure the unit/machine before storing or

transporting in a vehicle.

○ Empty the fuel tank before storing the unit/

machine. It is recommended that the fuel be

emptied after each use. If fuel is left in the tank,

store so fuel will not leak.

○ Store unit/machine out of the reach of children.

○ Clean and maintenance the unit carefully and

store it in a dry place.

○ Make sure engine switch is oﬀ when transporting

or storing.

○ When transporting in a vehicle or storage, cover

blade with blade cover.

If situations occur which are not covered in this

manual, take care and use common sense. Contact

your Tanaka dealer if you need assistance. Pay

special attention to statements preceded by the

following words:

WARNING

Indicates a strong possibility of severe

personal injury or loss of life, if instructions

are not followed.

CAUTION

Indicates a possibility of personal injury or

equipment damage, if instructions are not

followed.

NOTE

Helpful information for correct function and use.

CAUTION

Do not disassemble the recoil starter. You

may get a possibility of personal injury with

recoil spring.

000Book̲TCH22EAP2(50ST)̲NA.indb5000Book̲TCH22EAP2(50ST)̲NA.indb5 2018/09/1917:17:502018/09/1917:17:50

Rating

Let us know what you think about the Tanaka TCH 22EAP2 (50ST) Hedgecutter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Tanaka TCH 22EAP2 (50ST) Hedgecutter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Tanaka TCH 22EAP2 (50ST) Hedgecutter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Tanaka TCH 22EAP2 (50ST) Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Tanaka. They might be able to provide an original manual. Are you looking for the manual of your Tanaka TCH 22EAP2 (50ST) Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Tanaka
Model	TCH 22EAP2 (50ST)
Category	Hedgecutters
File type	PDF
File size	4.87 MB

All manuals for Tanaka Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about Tanaka TCH 22EAP2 (50ST) Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I know my hedgecutter is blunt? Verified

When branches are being pulled instead of cut, the hedgecutter is blunt and needs to be sharpened.

This was helpful (290) Read more

How do I sharpen my hedgecutter blades? Verified

Sharpening your hedgecutter blades is important for maintaining the performance and efficiency of the tool. To sharpen the blades, you will need a file or sharpening stone specifically designed for the type of blade on your hedgecutter.

This was helpful (197) Read more

How do I lubricate my hedgecutter blades? Verified

Lubricating your hedgecutter blades will help to reduce friction and wear, prolonging the life of the tool. Use a high-quality lubricating oil specifically designed for hedgecutters and apply a small amount to the blades after each use.

This was helpful (91) Read more

How can I prevent rust from forming on my hedgecutter blades? Verified

Rust can cause damage to your hedgecutter blades, reducing their performance and lifespan. To prevent rust, clean and dry the blades thoroughly after each use and store them in a dry, clean place. You can also consider applying a protective coating, such as oil or a rust inhibitor, to the blades before storing them.

This was helpful (55) Read more