Manual Sunding SD-576B Cycling Computer

Need a manual for your Sunding SD-576B Cycling Computer? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

tire size
circumference
tire size
circumference
tire size
circumference
12×1.75 935
12×1.95 940
14×1.50 1020
14×1.75 1055
16×1.50 1185
16×1.75 1195
16×2.00 1245
16×1-1/8 1290
16×1-3/8 1300
17×1-1/4 1340
18×1.50 1340
18×1.75 1350
20×1.25 1450
20×1.35 1460
20×1.50 1490
20×1.75 1515
20×1.95 1565
22×1-3/8 1770
22×1-1/2 1785
24×1.75 1890
24×2.00 1925
24×2.125 1965
24×1(520) 1753
24×/34Tubular 1785
24×1-1/8 1795
24×1-1/4 1905
26×1(599) 1913
26×1.25 1950
26×1.40 2005
26×1.50 2010
26×1.75 2023
26×1.95 2050
26×2.10 2068
26×2.125 2070
26×2.35 2083
26×3.00 2170
26×1-1/8 1970
26×1-3/8 2068
26×1-1/2 2100
26×7/8 1920
6520C 1938
6523C 1944
6525C 1952
6538A 2125
6538B 2105
27×1(630) 2145
27×1-1/8 2155
27×1-1/4 2161
27×1-3/8 2169
27.5×1.50 2079
27.5×1.95 2090
27.5×2.1 2148
27.5×2.25 2182
7018C 2070
7019C 2080
7020C 2086
7023C 2096
7025C 2105
7028C 2136
7030C 2146
7032C 2155
700Tubular 2130
7035C 2168
7038C 2180
7040C 2200
7042C 2224
7044C 2235
7045C 2242
7047C 2268
29×2.1 2288
29×2.2 2298
29×2.3 2326
CLK Mode(12H/24H)
Sensor Wiring
Computer Battery Installation
While the default Maintenance Alert digit
200km/m is flas hing, Press the RIGHT button
to choose200/400/600/800 km/m. Press the
left button to confirm and enter into Clock
mode. (when the ODO the Maintenance
Alert digit you setted, the will appear on
the screen to alert the rider, press the RIGHT
button 3 seconds to cancel it.)
SPD CURRENT SPEED
ODO ODOMETER (0.001~99999km/m)
DST TRIP DISTANCE
MXS MAXIMUM SPEED
AVS AVERAGE SPEED
TM ELAPSED TIME
CLK CLOCK (12H/24H)
SCAN
“-” “+” COMPARATOR
SETTING SPEED SCALE (km/h,m/h)
SETTING TYRE CIRCUMFERENCE (0mm~9999mm)
SETTING THE LAST VALUE OF ODOMETER/ODO
MAINTENANCE ALERT
FREEZE FRAME MEMORY
DOUBLE CELL BOXES
BACK LIGHT
AUTO ON/OFF
SD-576B (17 function)
FUNCTIONS
Remove the battery cover from the bottom of
the computer by using a flat blade screwdriver,
install one CR2032 battery with the positive (+)
pole facing the battery cover and replace the
cover. Should the LCD show irregular figures,
take out the battery and reinstall it.
Speedometer Sensor
Attach the sensor transmitter to either front fork using the supplied cable
ties. Fit the magnet to a spoke using the diagram above as a guide.
Position the sensor & magnet as shown above. Take care to align the
magnet to either arrow on the sensor with 3mm gap in between.
Route the sensor wire up the fork blade,
using the cable ties to secure it. Make
sure it does not hinder the movement
of the front wheel.
Mounting Shoe
Attach the mounting shoe with the cable ties
to thehandlebars as shown in the diagram.
Attach the comprter to the mounting shoe by
slidingthe unit until it snaps firmly into bosition. To remove, press down on
therelease catch, and remove the computer.
To check for proper speed function and sensor alignment, spin the front
wheel withthe computer in speed mode. Adujst the position of sensor and
magnet if there is onor weak signal.
Computer
Wheel Size Input
2060’ appears on the screed when the battery has been installde, with
one figure flashing enter the wheel circumerence using the formula below.
In the example above you would enter 2198. Press the RIGHT button to
advance the digits as nedded and the LEFT button to confirm and
advance. (The circumference ranges 0mm~9999mm), press the LEFT
button to enter KM/M mode.
Setting(km/h)/(m/h)
Press the RIGHT button to choose km/h or m/h.
Press the LEFT button to enter CLOCK mode.
Setting Maintenance alert
In CLOCK Mode, press the LEFT button for 5 seconds
to enter 12/24H selection. Press once more to swap
between 12/24 hours. Press the RIGHT button to
enter the Hour mode, when the figure indicating
HOUR starts to flash, press the LEFTbutton to adjust
it. Continue to press the RIGHT button to enter the
Minute mode, when the figureindicating MINUTE
starts to flash, press the LEFT button to adjust. Press the RIGHT button
to confirm & press the RIGHT button again to switch to ODO mode.
Instruction Manual
NOOFF
Open
Close
Co i n
Notice
Pass bicycle spokes through
the plastic hole on the bottom
of the magnet and tighten to
secure
The magnet is designed for spokes
that are less than 2mm thick
Download manual in English (PDF, 0.54 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Sunding SD-576B Cycling Computer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Sunding SD-576B Cycling Computer?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Sunding SD-576B Cycling Computer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sunding SD-576B Cycling Computer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sunding. They might be able to provide an original manual. Are you looking for the manual of your Sunding SD-576B Cycling Computer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Sunding
Model SD-576B
Category Cycling Computers
File type PDF
File size 0.54 MB

All manuals for Sunding Cycling Computers
More manuals of Cycling Computers

Frequently Asked Questions about Sunding SD-576B Cycling Computer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Why do I need to enter the size of my wheel? Verified

To calculate the traveled distance, the cycling computer uses the number of revolutions. The number of revolutions multiplied by the size of the wheel equals the traveled distance.

This was helpful (4166) Read more

A battery in my device is oxidized, can I still safely use it? Verified

Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (716) Read more

How many miles is one kilometer? Verified

One kilometer equals 0,621 mile. Ten kilometers makes 6,21 miles. One mile equals 1,609 kilometer. Ten miles makes 16,09 kilometers.

This was helpful (714) Read more
Manual Sunding SD-576B Cycling Computer

Related products

Related categories