Home > Household appliances > Tap Systems > Summit Tap Systems > Summit SBC635MBINKSSHV Tap System

Manual Summit SBC635MBINKSSHV Tap System

Need a manual for your Summit SBC635MBINKSSHV Tap System? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

PLACEMENT AND INSTALLATION

To ensure that your beer dispenser works at the maximum efficiency it was designed for, install

it in a location where there are proper air circulation and electrical connections.

Choosing the Right Place

Choose a location where the beer dispenser will be away from any heat sources and will not be

exposed to direct sunlight.

Remove all packing materials before using the beer dispenser.

Place the machine on a smooth, flat and sturdy surface.

CAUTION:

Installation

After unpacking, you MUST allow this appliance to stand upright for at least 2 hours to

allow the lubricant and refrigerant to drain back into the compressor and stabilize.

Failure to do so may adversely affect performance and the lifetime of the unit.

Model SBC635MOS is suitable for both indoor and outdoor use, while Model SBC635MBI is

designed for indoor use only. Both models can be installed either built-in or free-standing. For

built-in installation, you must provide the following clearances around the unit for best operation

and proper ventilation: 3/16” on both sides, 2” at the rear and 1/16” at the top. Take care that the

air vent at the front of the beer dispenser is never covered or blocked in any way. For free-

standing installation, make sure you allow at least 4” of clearance at the sides, rear and top to

allow for adequate airflow. Be sure no air vents are blocked.

The SBC635MBI and OS beer dispensers meet UL Standards 250 and 471 and are suitable for

residential or commercial use. Models with “7” in their name are ETL-S listed to NSF-7

sanitation standards.

Applications

Connect the appliance to a 3-prong power supply socket (which has a ground terminal).

Connecting to Power Supply

If you

only have a two-prong outlet, have it replaced by a qualified technician with an outlet that meets

the local codes

 DO NOT USE AN EXTENSION CORD 

Required nominal voltage and frequency are indicated on the rating plate. The connection to

the power supply and grounding has to be made according to current standards and

regulations. The appliance resists temporary voltage fluctuations with a tolerance of ±10%.

Outdoor model SBC635MOS is fitted with a GFCI safety plug to prevent short circuits during wet

conditions.

Once connected, allow the appliance to operate empty for two to three hours before putting a

beer keg inside.

Rating

Let us know what you think about the Summit SBC635MBINKSSHV Tap System by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Summit SBC635MBINKSSHV Tap System?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Summit SBC635MBINKSSHV Tap System. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Summit SBC635MBINKSSHV Tap System. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Summit. They might be able to provide an original manual. Are you looking for the manual of your Summit SBC635MBINKSSHV Tap System in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.