Home > Household appliances > Cooker Hoods > Summit Cooker Hoods > Summit HC24WW Cooker Hood

Manual Summit HC24WW Cooker Hood

Need a manual for your Summit HC24WW Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Installation Preparation

1" = 2.5 cm; 1' = 0.3 m

INSTALLATION PREPARATION

ADVANCE PLANNING

Vented Install Planning

• This hood is designed to be vented vertically using

a 7" round duct or a 3

⁄4" x 10" rectangular duct or

horizontally using a 3

⁄4" x 10" rectangular duct.

• Use metal ductwork only.

• Determine the exact location of the vent hood.

• Plan the route for venting exhaust to the outdoors.

To maximize the ventilation performance of the

vent system:

1. Minimize the duct run length and number of

transitions and elbows.

2. Maintain a constant duct size.

3. Seal all joints with duct tape to prevent any

leaks.

4. Do not use any type of flexible ducting.

• Install a wall cap or roof cap at the exterior

opening. Purchase the wall or roof cap and any

transition and length of duct needed in advance.

• When applicable, install any makeup (replacement)

air system in accordance with local building code

requirements.

Recirculation Install Planning

This hood may be installed in recirculation mode

and is shipped in this configuration. The charcoal

filter is necessary for recirculation installation.

This part may need to be ordered separately

depending on model.

Power Supply Planning

The location of the power supply connection is

called out in the Prepare for Electrical and Venting

section on page 15.

POWER SUPPLY

IMPORTANT – (please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE

MUST BE PROPERLY GROUNDED.

Remove house fuse or open circuit breaker before

beginning installation.

Do not use an extension cord or adapter plug with

this appliance. Follow National Electrical Codes or

prevailing local codes and ordinances.

Electrical supply

These vent hoods must be supplied with 120V,

60Hz, and connected to an individual, properly

grounded branch circuit, and protected by a 15 or

20 amp circuit breaker or time delay fuse.

• Wiring must be 2 wire with ground.

• If the electrical supply does not meet the above

requirements, call a licensed electrician before

proceeding.

• Route house wiring as close to the installation

location as possible in the ceiling or wall.

• Connect the wiring to the house wiring in

accordance with local codes.

Grounding instructions

The grounding conductor must be connected to

a ground metal, permanent wiring system, or an

equipment-grounding terminal or lead on the hood.

The improper connection of the

equipment-grounding conductor can result in a risk

of electric shock. Check with a qualified electrician

or service representative if you are in doubt

whether the appliance is properly grounded.

WARNING

Rating

Let us know what you think about the Summit HC24WW Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Summit HC24WW Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Summit HC24WW Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Summit HC24WW Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Summit. They might be able to provide an original manual. Are you looking for the manual of your Summit HC24WW Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Summit
Model	HC24WW
Category	Cooker Hoods
File type	PDF
File size	1.23 MB

All manuals for Summit Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Summit HC24WW Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1232) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (660) Read more