Home > Household appliances > Cooker Hoods > Summit Cooker Hoods > Summit H24SSCV Cooker Hood

Manual Summit H24SSCV Cooker Hood

Need a manual for your Summit H24SSCV Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Wiring Connection

Installation work and electrical wiring must be done by a qualified person(s) in accordance with all

applicable codes and standards, including fire-rated construction.

• Electrical grounding is required for this range hood. Check with a qualified electrician if you are

not sure whether the range hood is properly grounded. A fuse in the neutral or grounding circuit

could result in electrical shock.

• Failure to follow electrical requirements may result in a fire.

• If the hot/cold water pipe is interrupted

by plastic nonmetallic gaskets or other materials, DO

NOT use for grounding.

• DO NOT GROUND TO A GAS PIPE.

NOTE: It is the customer's responsibility to contact a qualified electrical installer and assure that the

electrical installation is adequate and complies with the National Electrical Code, or CSA

standards, as well as all local codes and ordinances.

• Save installation instructions for electrical inspector's use.

• If codes permit and a separate ground wire is used, it is recommended that a qualified e

lectrician

determine if the ground path is adequate.

• DO NOT use an extension cord or adapter plug with this appliance.

• The range hood must be connected with copper wire only.

• The range hood should be connected directly to the junction (or circuit breaker) box through

flexible, armored, or nonmetallic sheathed copper cable. Allow some slack in the cable so the

appliance can be moved if servicing is ever necessary.

• A UL listed or CSA approved conduit connector must be provided at each end of the power

supply cable (at the range hood a

nd at the junction box).

• When making the electrical connection, cut a 3.2 cm (1-1/4 in hole in the wall. A hole cut through

wood must be sanded until

• smooth. A hole through metal must have a grommet.

• 1O. When cutting or drilling into the wall or ceiling, do not damage electrical wiring and other

hidden utilities.

NOTE: Temporarily wire t

it for proper operation. If the range hood

does not operate correctly, do not

proceed with the installation.

he range hood to test

1. Use the power supply cable to connect the range hood

(A) directly to the junction box or circuit

breaker box. Use a flexible, armored, or nonmetallic sheathed copper cable only. Never use an

extension cord or adapter plug.

2. Connect a UL-listed or CSA-approved conduit connector to each end of the power supply cable

(at the range hood and at the junction box).

Connect the 2 colored wires from the range hood

(A) to the corresponding wires from the electrical

source: black to black (live), white to white

(neutral), and the house grounding wire to the

ground screw. Use either the top hole (

1) or the

back hole (2) of the range hood depending on your

installation type.

3. Turn the power on and ensure that the lights and

the fan are operating correctly.

4. Once you have tested the electrical connection,

disconnect the power supply cable and wires from

the electrical source before proceeding with the

rest of the installation.

DANGER: Risk of electrical shock. This range

hood must be properly grounded.

Rating

Let us know what you think about the Summit H24SSCV Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Summit H24SSCV Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Summit H24SSCV Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Summit H24SSCV Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Summit. They might be able to provide an original manual. Are you looking for the manual of your Summit H24SSCV Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Summit
Model	H24SSCV
Category	Cooker Hoods
File type	PDF
File size	2.71 MB

All manuals for Summit Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Summit H24SSCV Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1232) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (658) Read more