Home > Household appliances > Cooker Hoods > Summit Cooker Hoods > Summit CH301WADA Cooker Hood

Manual Summit CH301WADA Cooker Hood

Need a manual for your Summit CH301WADA Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Controls

On Some Models

1. Rangehood Control Panel: The control panel

is located on the front of the canopy.

2. Light Switch: The light switch toggles

between the lightbulb On and Off.

3. Fan Power Switch: The power switch toggles

between fan settings Hi, Lo, and Off.

USING THE HOOD: Controls

Remote Switch Installation

NOTE: Installation and service must be performed by a qualified installer/electrician

WARNING:

To avoid fire or electrical shock, turn off the power at the circuit breaker or fuse.

Test to ensure that the power is off before wiring.

MOUNTING THE SWITCH BOX

Install a single gang-recessed switch box at a convenient location. NOTE: If installing this switch in

accordance with ADA guidelines, the height of the light switch must be no lower than 15” from the floor

and no higher than 48” from the floor. Additional regulations apply if there are any obstructions in front

of the switch. For more information, refer to Section 308 of the most recent ADA Standards for

Accessible Design at ada.gov.

Note the configuration of the switches: the fan switch has three terminals, while the light switch has

two.

INSTALL THE MAIN POWER SUPPLY

Attach the power cable through the cable knockout.

Open the access panel on the underside of the hood by removing the Phillips screw.

Remove the grease filter.

WIRING

CONNECTING THE FAN SWITCH

Connect the wires from the fan terminals to the corresponding terminals on the remote switch. (i.e.,

Wire #1 in the fan terminal will connect to terminal #1 on the remote switch)

CONNECTING THE LIGHT SWITCH

Connect the wires from the light switch to the corresponding terminals on the light switch.

Rating

Let us know what you think about the Summit CH301WADA Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Summit CH301WADA Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Summit CH301WADA Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Summit CH301WADA Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Summit. They might be able to provide an original manual. Are you looking for the manual of your Summit CH301WADA Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Summit
Model	CH301WADA
Category	Cooker Hoods
File type	PDF
File size	1.43 MB

All manuals for Summit Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Summit CH301WADA Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1232) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (660) Read more