Home > Car miscellaneous > Car Speakers > Sony Car Speakers > Sony XS-GTF1025B Car Speaker

Manual Sony XS-GTF1025B Car Speaker

Need a manual for your Sony XS-GTF1025B Car Speaker? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts list/部件表

Mounting/安装

Mounting from the car interior/从汽车内安装

How to remove the grille net.

如何取下格栅网。

Before Mounting

A depth of at least 43 mm is required for flush

mounting. Measure the depth of the area where

you are to mount the speaker, and ensure that

the speaker is not obstructing any other

components of the car. Keep the following in

mind when choosing a mounting location:

•Make sure that nothing is obstructing around

the mounting location of the door (front or

rear) where you are to mount the speaker.

•A hole for mounting may already be cut out of

the inner panel of the door (front or rear). In

this case, you need to modify the board only.

•If you are to mount this speaker system in the

door (front or rear), make sure that the speaker

terminals, frame or magnet do not interfere

with any inner parts, such as the window

mechanism in the door (when you open or

close the window), etc.

Also make sure that the speaker grille does not

touch any inner fittings, such as the window

cranks, door handles, arm rests, door pockets,

lamps or seats etc.

安装之前

嵌入式安装至少需要 43 mm 深度。请测量您要安

装扬声器的位置深度，并确保扬声器不会妨碍汽

车上的任何其他部件。选择安装位置时，请注意

下列事项：

• 确保您要安装扬声器的车门（前或后）的安装位

置周围没有障碍物。

• 车门（前或后）的内面板上可能已经开有安装

孔。在此情况下，您只需改装底板。

• 如果您要将扬声器系统安装在车门（前或后）

内，请确保扬声器端子、框架或磁体不会干扰任

何内部部件，例如车门上的车窗机械装置（当您

打开或关闭车窗时）等。

同时，也请确保扬声器格栅不会碰到任何内部装

置，例如车窗摇柄、车门把手、扶手、门套、灯

或座位等。

Flat mounting (installed flush with the surface of the dash)/ 平面安装(与仪表板表面齐平安装)

This speaker can be made to fit in almost any type of car by removing

the mounting tabs.

Use clippers or pliers, etc. to cut or snap the mounting tabs off so

that it is even with the edge of the speaker frame as illustrated.

Note

After removing the mounting tabs, handle the speaker frame with

care, as the edges may be sharp.

去除安装翼片后，此扬声器几乎可适合安装在任何类型的汽车上。

用剪刀或钳子等工具剪去或钳断此安装翼片，且如图所示正好与扬声器框

的边缘齐平。

注意

在去除安装翼片后，由于扬声器外框边缘可能较锋利，请小心操作。

ø 91 mm

× 2

× 8

ø 4 × 30

× 8

× 2

Press and insert the edges of the grille net.

按下并插入格栅网的边缘。

Striped cord

条纹电线

* White cord — Left speaker

Grey cord — Right speaker

* 白色电线 — 左扬声器

灰色电线 — 右扬声器

To speaker cord of a car.

至汽车扬声器电线。

8 mm

13 mm

Remove the grille net.

取下格栅网。

Mark the 4 bolt holes and make them 3.3 mm* in diameter.

画出4个螺栓孔，并钻成 3.3 mm* 直径的孔。

* When using 4 : ø 5 mm

* 使用 4 时：ø 5 mm

Door panel

门板

ø 3.3 mm*

ø 92 mm

Rating

Let us know what you think about the Sony XS-GTF1025B Car Speaker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sony XS-GTF1025B Car Speaker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sony XS-GTF1025B Car Speaker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sony XS-GTF1025B Car Speaker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sony. They might be able to provide an original manual. Are you looking for the manual of your Sony XS-GTF1025B Car Speaker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.