Manual Sony XM-5046 Car Amplifier
Need a manual for your Sony XM-5046 Car Amplifier? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
Sony Corporation 1996 Printed in Japan
XM-5046/3546
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
60␣ (45)* watts per channel minimum continuous average power into
4␣ ohms, both channels driven from 20 Hz to 20 kHz with no more than
0.04% total harmonic distortion per Car Audio Ad Hoc Committee
standards.
Other Specifications
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. XM-5046 Serial No.
Model No. XM-3546 Serial No.
3-858-868-11 (1)
Stereo Power
Amplifier
Operating Instructions
Mode d'emploi
This instruction manual covers the XM-5046 and XM-3546. The
illustrations on the manual are of the XM-5046. When differences occur,
they are clearly described in the corresponding sections.
Ce mode d’emploi couvre les modèles XM-5046 et XM-3546. Les
illustrations représentent le XM-5046. Toute différence est clairement
indiquée dans les paragraphes correspondants.
Spécifications
Circuiterie Circuit OTL (Sortie sans
transformateur)
Alimentation par impulsions
Entrées Prises à broche RCA
Sorties Bornes de haut-parleurs
Impédance des haut-parleurs
1 – 8 ohms (stéréo)
2 – 8 ohms (utilisé comme
amplificateur en pont)
Sorties maximales Quatre haut-parleurs :
120 (90)* watts par canal (à 4␣ ohms)
180 (130)* watts par canal
(à 2␣ ohms)
Deux haut-parleurs :
360 (260)* watts par canal
(à 4␣ ohms)
Sorties nominales (tension d’alimentation de 12,5 V)
Quatre haut-parleurs :
50 (35)* watts par canal (20 Hz – 20
kHz, 0,04 % THD, à 4 ohms)
75 (50)* watts par canal (20 Hz – 20
kHz, 0,1 % THD, à 2 ohms)
75 (50)* watts par canal (20 Hz – 20
kHz, 0,1 % THD, à 1 ohms)
Deux haut-parleurs :
150 (100)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 4 ohms)
Sorties nominales (tension d’alimentation de 14,4 V)
Quatre haut-parleurs :
60 (45)* watts par canal (20 Hz – 20
kHz, 0,04 % THD, à 4 ohms)
90 (65)* watts par canal (20 Hz – 20
kHz, 0,1 % THD, à 2 ohms)
90 (65)* watts par canal (20 Hz – 20
kHz, 0,1 % THD, à 1 ohms)
Deux haut-parleurs :
180 (130)* watts par canal (20 Hz –
20 kHz, 0,1 % THD, à 4 ohms)
Circuit system OTL (output transformerless)
circuit
Pulse power supply
Inputs RCA pin jacks
Outputs Speaker terminals
Speaker impedance 1 – 8 ohms (stereo)
2 – 8 ohms (when used as a
bridging amplifier)
Maximum outputs Four speakers :
120 (90)* watts per channel
(at 4␣ ohms)
180 (130)* watts per channel
(at 2␣ ohms)
Two speakers :
360 (260)* watts per channel
(at 4␣ ohms)
Rated outputs (supply voltage at 12.5 V)
Four speakers :
50 (35)* watts per channel (20 Hz –
20 kHz, 0.04 % THD, at 4 ohms)
75 (50)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 2 ohms)
75 (50)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 1 ohms)
Two speakers :
150 (100)* watts per channel (20 Hz
– 20 kHz, 0.1 % THD, at 4 ohms)
Rated outputs (supply voltage at 14.4 V)
Four speakers :
60 (45)* watts per channel (20 Hz –
20 kHz, 0.04 % TH D, at 4 ohms)
90 (65)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 2 ohms)
90 (65)* watts per channel (20 Hz –
20 kHz, 0.1 % THD, at 1 ohms)
Two speakers :
180 (130)* watts per channel (20 Hz
– 20 kHz, 0.1 % THD, at 4 ohms)
Features
•Rated power output of 50 (35)* watts per
channel (at 4 ohms, supply voltage at 12.5 V).
•Rated power outputs of 60 (45)* watts per
channel (at 4 ohms, supply voltage at 14.4 V).
•The XM-5046/3546 can be used as a 2 channels
amplifier with a maximum outputs of 360 (260)*
watts at 4 ohms (when used as a bridging
amplifier).
•Protection circuit provided.
•Pulse power supply** for stable, regulated
output power.
•New circuit which removes the source resistance
from the final MOS FET output stage, and drives
the speaker directly.
* (XM-3546)
** Pulse power supply
This unit has a built-in power regulator which converts the
power supplied by the DC 12 V car battery into high speed
pulses using a semiconductor switch. These pulses are
stepped up by the built-in pulse transformer and separated
into both positive and negative power supplies before being
converted into direct current again. This is to regulate
fluctuating voltage from the car battery. This light weight
power supply system provides a highly efficient power
supply with a low impedance output.
Caractéristiques
•Sortie nominale de 50 (35)* watts par canal (à
4␣ ohms, tension d’alimentation de 12,5 V).
•Sorties nominale de 60 (45)* watts par canal (à
4␣ ohms, tension d’alimentation de à 14,4 V).
•Le XM-5046/3546 peut être utilisé comme
amplificateur à 2 canaux avec une puissance
maximum de 360 (260)* watts à 4 ohms (avec un
amplificateur en pont).
•Circuit de protection fourni.
•Alimentation par impulsions** pour une
puissance de sortie stable et régulée.
•Nouveau circuit qui élimine la résistance source
de l’étage de sortie final MOS FET et commande
directement le haut-parleur.
* (XM-3546)
** Alimentation par impulsions
Le convertisseur intégré de cet appareil permet de
transformer l’alimentation en courant continu fournie par
une batterie de voiture de 12 volts en signaux ultra-rapides
grâce à l’interrupteur à semiconducteur. Ces signaux
peuvent être démultipliés par le transformateur intégré à
impulsions, séparés en courant positif et négatif avant d’être
de nouveau convertis en courant continu afin de stabiliser la
tension variable de la batterie de voiture. Le système
d’alimentation de faible poids fournit une alimentation très
efficace avec une sortie de basse impédance.
Frequency response 5 Hz – 100 kHz (
-3
dB)
Harmonic distortion 0.005 % or less
(at 1kHz, 4 ohms)
Input level adjustment range
0.2 – 4.0 V
High-pass filter 80 Hz, –12 dB/oct
Low-pass filter 50 Hz, 80 Hz, –18 dB/oct
Power requirements 12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
Current drain at rated output: 36 (25)* A
Remote input: 1 mA
Dimensions Approx. 181 × 62 × 430 (360)* mm
(w/h/d) (7
1
/4 × 2
1
/2 × 17
(14
1
/4)* in.) include terminal
protect cover
Mass Approx. 3.1 (2.5)* kg (6 lb. 13 oz.
(5 lb. 8 oz.)*) not incl. accessories
Supplied accessories Mounting screws (4)
Terminal protect cover (2)
(Fuse 40 A (1))*
Optional accessories Connecting cord for power
amplifier RC-46
RCA pin cord RC-64 (2 m)
RCA pin cord RC-65 (5 m)
*(XM-3546)
Design and specifications are subject to change without
notice.
+0
Réponse en fréquence
5 Hz – 100 kHz (
-3
dB)
Distorsion harmonique
0,005 % ou inférieure
(à 1kHz, 4 ohms)
Plage de réglage du niveau d'entrée
0,2 – 4,0 V
Filtre passe-haut 80 Hz, – 12 dB/oct
Filtre passe-bas 50 Hz, 80 Hz, –18 dB/oct
Alimentation Batterie de voiture, courant continu
12 V (masse négative)
Tension d'alimentation
10,5 – 16 V
Courant à la sortie nominale: 36 (25)* A
Entrée de télécommande: 1 mA
Dimensions Env. 181 × 62 × 430 (360)* mm
(l/h/p) (7
1
/4 × 2
1
/2 × 17
(14
1
/4)* po.) capuchon de
protection de borne compris
Poids Env. 3,1 (2,5)* kg (6 li. 13 on.
(5 li. 8 on.)*) accessoires non
compris
Accessoires fournis Vis de montage (4)
Capuchon de protection de borne (2)
(Fusible 40 A (1))
*
Accessoires en option
Cordon de connexion pour
amplificateur de puissance RC-46
Cordon à broche RCA RC-64 (2 m)
Cordon à broche RCA RC-65 (5 m)
*(XM-3546)
La conception et les spécifications peuvent être modifiées
sans préavis.
+0
Loading…
Rating
Let us know what you think about the Sony XM-5046 Car Amplifier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your Sony XM-5046 Car Amplifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sony. They might be able to provide an original manual. Are you looking for the manual of your Sony XM-5046 Car Amplifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | Sony |
| Model | XM-5046 |
| Category | Car Amplifiers |
| File type | |
| File size | 0.29 MB |
All manuals for Sony Car Amplifiers
More manuals of Car Amplifiers
Join the conversation about this product
Here you can share what you think about the Sony XM-5046 Car Amplifier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.