Home > Car miscellaneous > Car Amplifiers > Sony Car Amplifiers > Sony XM-4501 Car Amplifier

Manual Sony XM-4501 Car Amplifier

Need a manual for your Sony XM-4501 Car Amplifier? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION

50 (30)*␣ watts per channel minimum continuous average power into

4␣ ohms, both channels driven from 20 Hz to 20 kHz with no more than

0.04 % total harmonic distortion per Car Audio Ad Hoc Committee

standards.

* XM-4301

Other Specifications

Stereo Power

Amplifier

Spécifications Features

•Maximum power output of 100 (60)* watts per

channel (at 4 ohms).

•Wide dynamic range and low distortion (less

than 0.005 %).

•Built in protection circuit.

•Pulse power supply** for stable and regulated

output power.

•Possible to switch between HPF (High-pass

filter) and LPF (Low-pass filter).

* XM-4301

** Pulse power supply

This unit has a built-in power regulator which converts the

power supplied by the DC 12 V car battery into high speed

pulses using a semiconductor switch. These pulses are

stepped up by the built-in pulse transformer and separated

into both positive and negative power supplies before being

converted into direct current again. This is to regulate

fluctuating voltage from the car battery. This light weight

power supply system provides a highly efficient power

supply with a low impedance output.

Caractéristiques

•Puissance admissible de 100 (60)* watts par

canal (à 4 ohms).

•Large plage dynamique et faible distorsion

(inférieure à 0,005 %).

•Circuit de protection intégré.

•Alimentation par impulsions** garantissant une

puissance de sortie stable et régulière.

•Il est possible de commuter HPF (filtre passe-

haut) et LPF (filtre passe-bas).

* XM-4301

** Alimentation par impulsions

Le convertisseur intégré de cet appareil permet de

transformer l’alimentation en courant continu fournie par

une batterie de voiture de 12 volts en signaux ultra-rapides

grâce au commutateur à semiconducteur. Ces signaux

peuvent être démultipliés par le transformateur intégré à

impulsions, séparés en courant positif et négatif avant

d’être de nouveau convertis en courant continu afin de

stabiliser la tension variable de la batterie de voiture. Ce

système d’alimentation de faible poids fournit une

alimentation très efficace avec une sortie de basse

impédance.

3-858-864-11 (1)

Sony Corporation 1996

Printed in Japan

XM-4501

XM-4301

Operating Instructions

Mode d’emploi

Circuit system OTL (output transformerless)

circuit

pulse power supply

Inputs RCA pin jacks

Outputs Speaker terminals

Speaker impedance 2 – 8 ohms (stereo)

4 – 8 ohms (when used as a

bridging amplifier)

Maximum output 100 (60)* watts per channel with

4-speaker system (at 4 ohms)

100 watts × 2 + 260 watts × 1

(60 watts × 2 + 150 watts × 1)* with

3-speaker system

260 (150)* watts per channel with

2-speaker system (at 4 ohms)

Rated output (supply voltage at 14.4 V)

50 (30)* watts per channel with

4-speaker system (20 Hz – 20 kHz,

0.04 % THD, at 4 ohms)

65 (40 )* watts per channel with

4-speaker system (20 Hz – 20 kHz,

0.1 % THD, at 2 ohms)

130 (70)* watts per channel with

2-speaker system (20 Hz – 20 kHz,

0.1 % THD, at 4 ohms)

Frequency response 5 Hz – 100 kHz (

-3

dB)

Harmonic distortion 0.005 % or less (at 1 kHz, 4 ohms)

Input level adjustment range

0.2 – 4 V

High-pass filter (INPUT FRONT L, R and REAR L, R)

80 Hz, -12 dB/oct

Low-pass filter for subwoofer (INPUT FRONT L, R and

REAR L, R)

80 Hz, -18 dB/oct

Power requirements 12 V DC car battery

(negative ground)

Power supply voltage10.5 – 16 V

Current drain at rated output: 26 (18)* A

Remote input: 5 mA

Dimensions Approx. 230 × 53 × 310 (260)* mm

(w/h/d) (9

/8 × 2

/8 × 12

(10

/4)* in.) not incl. projecting

parts and controls

Mass Approx. 3 kg (6 lb. 9 oz.) (2.5 kg

(5 lb. 8 oz))* not incl. accessories

Supplied accessories Mounting screws (× 4)

Optional accessories Connecting cord for power

amplifier RC-46

RCA pin cord RC-64 (2 m)

RCA pin cord RC-65 (5 m)

* XM-4301

Design and specifications are subject to change without

notice.

Circuiterie Alimentation par impulsions avec

circuit OTL (Sortie sans

transformateur)

Entrées Prises à broche RCA

Sorties Bornes de haut-parleurs

Impédance des haut-parleurs

2 – 8 ohms (stéréo)

4 – 8 ohms (utilisé comme

amplificateur en pont)

Sortie maximale à 4 ohms

100 (60)* watts par canal pour le

système à 4 haut-parleurs (à

4 ohms)

100 watts × 2 + 260 watts × 1 (60

watts × 2 + 150 watts × 1)* pour le

système à 3 haut-parleurs

260 (150)* watts par canal pour le

système à 2 haut-parleurs

Sorties nominales (tension d’alimentation de 14,4 V)

50 (30)* watts par canal pour le

système à 4 haut-parleurs (20 Hz –

20 kHz, 0,04 % DHT, à 4 ohms)

65 (40)* watts par canal pour le

système à 4 haut-parleurs (20 Hz –

20 kHz, 0,1 % DHT, à 2 ohms)

130 (70)* watts par canal pour le

système à 2 haut-parleurs (20 Hz –

20 kHz, 0,1 % DHT, à 4 ohms)

Réponse en fréquence

5 Hz – 100 kHz (

-3

dB)

Distorsion harmonique

0,005 % ou inférieure (à 1 kHz,

4 ohms)

Plage de réglage du niveau d’entrée

0,2 – 4 V

Filtre passe-haut (INPUT FRONT L, R et REAR L, R)

80 Hz, –12 dB/oct

Filtre passe-bas pour subwoofer (INPUT FRONT L, R et

REAR L, R)

80 Hz, –18 dB.oct

Alimentation Batterie de voiture, courant

continu 12 V (masse négative)

Tension d’alimentation

10,5 – 16 V

Courant à la sortie nominale: 26 (18)* A

Entrée télécommande: 5 mA

Dimensions hors tout Env. 230 x 53 x 310 (260)* mm

(l/h/p) (9

/8 × 2

/8 × 12

(10

/4)* po.)

Poids Env. 3 kg (6 li. 9 on.) (2,5 kg (5 li.

8 on.))* accessoires non compris

Accessoires fournis Vis de montage (4)

Accessoires en optionCordon de liaison pour

amplificateur de puissance RC-46

Cordon à broche RCA RC-64 (2 m)

Cordon à broche RCA RC-65 (5 m)

* XM-4301

La conception et les spécifications peuvent être

modifiées sans préavis.

This instruction manual covers the XM-4501 and XM-4301. The illustrations in the

manual are of the XM-4501. When differences occur, they are clearly described in

the corresponding sections.

Ce mode d’emploi couvre les modèles XM-4501 et XM-4301. Les illustrations

représentent le XM-4501. Toute différence est clairement indiquée dans les

paragraphes correspondants.

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record the serial number in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this

product.

Model No. XM-4501 Serial No.

Model No. XM-4301 Serial No.

Rating

Let us know what you think about the Sony XM-4501 Car Amplifier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sony XM-4501 Car Amplifier?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sony XM-4501 Car Amplifier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sony XM-4501 Car Amplifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sony. They might be able to provide an original manual. Are you looking for the manual of your Sony XM-4501 Car Amplifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.