Home > Audio, TV & Photo > Receivers > Sony Receivers > Sony STR-LSA1 Receiver

Manual Sony STR-LSA1 Receiver

Need a manual for your Sony STR-LSA1 Receiver? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

WARNING

To prevent fire or shock

hazard, do not expose the

unit to rain or moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to qualified

personnel only.

Precautions

On safety

Should any solid object or liquid fall into

the cabinet, unplug the receiver and have it

checked by qualified personnel before

operating it any further.

On power sources

• Before operating the receiver, check that

the operating voltage is identical with

your local power supply. The operating

voltage is indicated on the nameplate at

the bottom of the receiver.

• The unit is not disconnected from the AC

power source (mains) as long as it is

connected to the wall outlet, even if the

unit itself has been turned off.

• If you are not going to use the receiver

for a long time, be sure to disconnect the

receiver from the wall outlet. To

disconnect the AC power cord, grasp the

plug itself; never pull the cord.

• AC power cord must be changed only at

the qualified service shop.

On placement

• Do not install the appliance in a confined

space, such as a bookcase or built-in

cabinet.

• Place the receiver in a location with

adequate ventilation to prevent heat

buildup and prolong the life of the

receiver.

• Do not place the receiver near heat

sources, or in a place subject to direct

sunlight, excessive dust or mechanical

shock.

• The nameplate is located on the bottom

exterior.

On operation

Before connecting other components, be

sure to turn off and unplug the receiver.

On cleaning

Clean the cabinet, panel and controls with

a soft cloth slightly moistened with a mild

detergent solution. Do not use any type of

abrasive pad, scouring powder or solvent

such as alcohol or benzine.

Replacing the battery in the remote

Slide out and remove the battery case, and

insert a new lithium battery CR2025 with

the + side facing up. And then, slide the

battery case back in.

1 Keep pushing.

2 Pull out.

CAUTION

Danger of explosion if battery is incorrectly

replaced. Replace the battery only with

the same or equivalent type recommended

by the manufacturer. Discard unused

batteries according to the manufacturer’s

instructions.

If you have any question or problem

concerning your receiver, please

consult your nearest Sony dealer.

A lithium

battery

CR2025

Rating

Let us know what you think about the Sony STR-LSA1 Receiver by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sony STR-LSA1 Receiver?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sony STR-LSA1 Receiver. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sony STR-LSA1 Receiver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sony. They might be able to provide an original manual. Are you looking for the manual of your Sony STR-LSA1 Receiver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.