Home > Household appliances > Cooker Hoods > Smeg Cooker Hoods > Smeg KT90GRE Cooker Hood

Manual Smeg KT90GRE Cooker Hood

Need a manual for your Smeg KT90GRE Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

EN 3

INSTALLATION INSTRUCTIONS:

The hood is supplied with all the accessories necessary

for its installation. The minimum distance between the

lower surface of the hood and the hob must be at least

650mm for electric hobs (Fig. 1). If the motor inlet is

equipped with a non-return valve for fumes, make sure

it can open and close freely.

For easy installation it is recommended to follow the

procedures described below:

1) The hood must be centred with respect to the hob surface.

2) There are different installation procedures depending

on the hood model. Choose one of the following xing

systems:

a) 2 levelling hooks that fasten on with the supplied

expansion plugs (Fig. 2)

b) Rear levelling bracket that fastens on with the

supplied expansion plugs (Fig. 3)

c) For island models refer to the special installation

attachment.

N.B.: Fixing systems a) and b) t on to the back of the

hood in the holes L1 (Fig. 5).

3) Remove the grease lters and position the hood on the

wall and mark the reference position for the holes to

anchor the relative xing system.

4) Drill the 2 holes previously marked after removing the

hood from the wall

5) Anchor the xing system to the wall by tightening the

expansion plug

6) Mark holes L2 on the wall to secure the plugs safely in

the holes. (plugs supplied)

7) Hang the hood on the xing system (g. 2 and 3) and

level it using the adjustment screws ( g.2 ).

8) Securely x the hood by fully tightening the two expansion

screws of the holes L2

AIR CONNECTION SYSTEMS:

EXTRACTION version:

Connect the fume expulsion duct (inside diameter Ø 150

mm) to the exhaust of the motor inlet. The expulsion duct

must not have a diameter Ø of less than 120 mm.

Note that if the hood is supplied with an active carbon

lter, this must be removed (see page 8)

Deviation for Germany:

When the hood and other appliances powered by energy

other than electricity are simultaneously ON, the negative

pressure in the room must not exceed 4 Pa (4 x 10

-5

bar).

Fig. 1

Fig. 2

Fig. 3

Ø150

Fig. 4

Rating

Let us know what you think about the Smeg KT90GRE Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Smeg KT90GRE Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Smeg KT90GRE Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Smeg KT90GRE Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Smeg. They might be able to provide an original manual. Are you looking for the manual of your Smeg KT90GRE Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Smeg
Model	KT90GRE
Category	Cooker Hoods
File type	PDF
File size	1.26 MB

All manuals for Smeg Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Smeg KT90GRE Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1232) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (660) Read more