Home > Do-It-Yourself > Drill-Drivers > Skil Drill-Drivers > Skil 3075 CA Drill-Driver

Manual Skil 3075 CA Drill-Driver

Need a manual for your Skil 3075 CA Drill-Driver? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

- output torque will increase as clutch ring B is rotated

from 1 to 17

- when turning in a screw, rst try VariTorque position 1

and increase until the desired depth has been reached

- position D will lock up the clutch to permit (non-impact)

drilling or driving heavy-duty work

- position C will lock up the clutch to permit impact

drilling only

! ensure that gear selector G is in position 2 when

function selector F is in impact drilling position

! do not use impact drilling position C for drilling in

wood, metal, ceramic and plastic to prevent the

drill/screw bit from being damaged

• Mechanical gear selection e

- set selector G to desired speed

! actuate the gear selector while tool is running

slowly

- low speed

- high torque

- for screwdriving and drilling large diameters

- for tapping thread

- high speed

- lower torque

- for impact drilling

- for drilling small diameters

• WORKLIGHT L r

- WORKLIGHT L will illuminate in default low brightness

mode when the tool is turned on OR if WORKLIGHT

button K is depressed without turning the tool on.

Brightness can be switched from low to full or from full

to low by pressing the WORKLIGHT button K.

- Low brightness – turns o approx. 10s after on/o

switch is released

- High brightness - turns o approx. 600s after on/o

switch is released

! WORKLIGHT button K is disabled while the tool is

running. The brightness should only be switched

when the tool is not running.

! 

protection is activated (see below)

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

- the load is too high --> remove load and restart

- the battery temperature is not within the allowable

operating temperature range of -20 to +50°C --> 2

levels of the battery level indicator start ashing when

pressing button M7c; wait until battery has returned

within the allowable operating temperature range

- the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level 7b is shown by the battery level indicator

when pressing button M; charge battery

! 



damaged

• Holding and guiding the tool t

! while working, always hold the tool at the grey-

coloured grip area(s)

- keep ventilation slots H 2 uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

• 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• Only use the following batteries and chargers with

this tool

- SKIL battery: BR1*31****

- SKIL charger: CR1*31****

• Do not use battery when damaged; it should be replaced

immediately

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

• when charging 4...40°C

• during operation –20...+50°C

• during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

Read the instruction manual before use

Batteries may explode when disposed of in re, so do not

burn battery for any reason

Store tool/charger/battery in locations where temperature

will not exceed 50°C

Do not dispose of electric tools and batteries together

with household waste material

USE

• Combined switch for on/o and speed control A 2

- control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery 2

• Battery level indicator 7

- press the battery level indicator button M to show the

current battery level 7a

! when the lowest level of the battery indicator

7b, the

! battery is empty

! 

after pressing button M 7c, the battery is not

! within the allowable operating temperature range

• Attaching belt clip 8

- attach the belt clip N to the drill with the supplied screw.

• Integrated bit clip P 2

- conveniently store hex bits.

• Strap xing Q 2

- attach a wrist strap (not included) around your hand

when carrying the tool.

• Changing direction of rotation 9

- when not properly set in left/right position, switch A 2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Changing bits q

! do not use bits with a damaged shank

• Torque control (VariTorque) w

Rating

Let us know what you think about the Skil 3075 CA Drill-Driver by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Skil 3075 CA Drill-Driver?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Skil 3075 CA Drill-Driver. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Skil 3075 CA Drill-Driver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Skil. They might be able to provide an original manual. Are you looking for the manual of your Skil 3075 CA Drill-Driver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Skil
Model	3075 CA
Category	Drill-Drivers
File type	PDF
File size	5.46 MB

All manuals for Skil Drill-Drivers
More manuals of Drill-Drivers

Frequently Asked Questions about Skil 3075 CA Drill-Driver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

I keep stripping the screw head when using the drill-driver. Why is that? Verified

Most drill-drivers can be set to screw harder or softer. If the head keeps being stripped, the drill-driver should probably be put into a different setting. When it is a wireless device, always be sure the battery is charged for an optimal result.

This was helpful (73) Read more

Do I need to wear hearing protection when using a drill? Verified

Yes you should. Although the amount of noise produced by a drill can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (23) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (11) Read more