Home > Do-It-Yourself > Welders > SIP Welders > SIP T126 Welder

Manual SIP T126 Welder

Need a manual for your SIP T126 Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

EXPLODED DIAGRAM WELDMATE T166 MIG

SAFETY INSTRUCTIONS….cont

should be kept at a safe distance from the work area.

STORE THE MIG WELDER SAFELY WHEN NOT IN USE: The mig welder should be stored in

a dry location and disconnected from the mains supply, and out of the reach of chil-

dren.

USE SAFETY CLOTHING / EQUIPMENT: Use a CE approved welding mask at all times with

the correct shade of filter lens. A fume extractor should be used particularly where

there is little or no ventilation.

PROTECT YOURSELF FROM ELECTRIC SHOCK: When working with the mig welder, avoid

contact with any earthed items (e.g. pipes, radiators, hobs and refrigerators, etc.). It is

advisable wherever possible to use an RCD (residual current device) at the mains

socket.

STAY ALERT: Always watch what you are doing and use common sense. Do not oper-

ate the mig welder when you are tired or under the influence of alcohol or drugs.

DISCONNECT THE MIG WELDER FROM THE MAINS SUPPLY: When not in use and before

servicing.

AVOID UNINTENTIONAL ARCING: Make sure the switch is in the OFF position before con-

necting the mig welder to the mains supply.

NEVER LEAVE THE MIG WELDER CONNECTED WHILST UNATTENDED: Turn the mig welder

off and disconnect it from the mains supply between jobs. Do not leave the mig weld-

er connected to the mains supply if no more welding is to be done.

DO NOT ABUSE THE MAINS LEAD: Never attempt to move the mig welder by the mains

lead or pull it to remove the plug from the mains socket. Keep the mains lead away

from heat, oil and sharp edges. If the mains lead is damaged, it must be replaced by

the manufacturer or its service agent or a similarly qualified person in order to avoid

unwanted hazards. All extension cables must be checked at regular intervals and re-

placed if damaged.

CHECK FOR DAMAGED PARTS: Before every use of the mig welder, any damage found

should be carefully checked to determine that it will operate correctly, safely and per-

form its intended function. Any damaged, split or missing parts that may affect its op-

eration should be correctly repaired or replaced by an authorised service centre un-

less otherwise indicated in this instruction manual.

KEEP ALL PANELS IN PLACE: Never operate the mig welder with any panels removed,

this is extremely dangerous.

MAINTAIN THE MIG WELDER WITH CARE: Keep the earth clamp and mig torch clean for

the best and safest performance.

USE ONLY RECOMMENDED ACCESSORIES: Consult this user manual, your distributor or

SIP directly for recommended accessories. Follow the instructions that accompany the

accessories. The use of improper accessories may cause hazards and will invalidate

any warranty you may have.

SECURE THE WORK-PIECE: Always use welding clamps to secure the work piece. This

frees up both hands to operate the mig welder correctly.

DO NOT OVERREACH: Keep proper footing and balance at all times.

USE THE RIGHT TOOL: Do not use the mig welder to do a job for which it was not de-

Download manual in English (PDF, 1.03 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the SIP T126 Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the SIP T126 Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the SIP T126 Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your SIP T126 Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact SIP. They might be able to provide an original manual. Are you looking for the manual of your SIP T126 Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	SIP
Model	T126
Category	Welders
File type	PDF
File size	1.03 MB

All manuals for SIP Welders
More manuals of Welders

Frequently Asked Questions about SIP T126 Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (27) Read more