Manual Sierra Designs Pampero V.2 Tent

Need a manual for your Sierra Designs Pampero V.2 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461
S I E R R A D E S I G N S
insert
correct
PAMPERO V.2
Figure 3: Clip-Loc
Figure 1: Correct Pole Assembly Figure 2: Tent Body (top view)
First Pitch
In order to familiarize yourself with your new tent, we
suggest that you “test pitch” it before embarking on a
wilderness trip.
Select a Site
Look for a level spot that is protected from the wind in
order to ensure sleeping comfort. Clear the area of debris
such as sharp stones and sticks which might abrade or
puncture the tent floor. Choose an area that will drain
well when it rains.
Unfurl the Tent and Assemble the Poles
Unfurl the tent and lay the tent floor flat on the ground
with the door unzipped. Carefully unfold the shock corded
pole sections and allow them to slide together. Do not
allow the poles to snap together: This can lead to serious
pole damage. Make certain that the insert of each pole
section is fully inserted into the next pole section
(Figure 1). You will have four poles all together: two
straight poles of equal length, one arch pole, and one short
pre-bent pole. Twist the sections of the short pole so they
form a continuous arch
Stake Out the Tent Floor
We recommend staking the oor prior to inserting the
poles for greater pitching ease. Although the Pampero V.2
is a freestanding tent, we suggest that you always stake out
the oor for greater safety and stability, especially in high
winds. First stake each of the webbing loops at the back
of the tent at points G & H (Figure 2). Then move to the
front of the tent, pull the webbing loops at points A & B
until the tent oor is squarely and semi-tautly positioned,
and then stake them down. Finally, stake the sides at
points C, D, E, & F again pulling the tent oor semi-taut.
Erect the Tent
Insert the tips of one of the straight poles into the grom-
mets at points A & H, and the tips of a second straight
pole into the grommets at points B & G (Figure 2). Pull
the two poles up so that they intersect at point I and attach
the Clip-Loc over the intersection at the apex (do not at-
tach the bungee yet). Now following the seams along the
poles, attach the remaining Swift Clips, designated with
gray webbing. Next, insert the metal tips of the short pole
into the grommets at points E & F. Attach the two Clip-
Locs at points L & M (do not attach the bungee yet) and
the remaining Swift Clip along the pole seam. Using the
remaining arch pole repeat the same process used for the
other three poles. Starting at attaching the Clip-Locs fol-
lowed by the Swift Clips. Now attach the bungee cord on
the ve Clip-Locs by wrapping the bungee in the direction
crossing the open gate of the clip. Wrap the cord around
PAMPERO V.2 TENT CONTENTS
Tent Body & Rainfly: 1 Line Tighteners: 6
Tent Poles: 4 Pitching Instructions: 1
Tent Stakes: 10* Pole Sack: 1
Guy Cord: 6 Stake Sack: 1
* Sierra Designs tents include stakes for pitching the body and fly under normal conditions.
Additional stakes may be required in severe conditions.
Your Sierra Designs
PAMPERO V.2 tent is very
easy to pitch and maintain.
Follow these instructions
to pitch your tent quickly,
safely and easily.
Download manual in English (PDF, 0.22 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Sierra Designs Pampero V.2 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Sierra Designs Pampero V.2 Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Sierra Designs Pampero V.2 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sierra Designs Pampero V.2 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sierra Designs. They might be able to provide an original manual. Are you looking for the manual of your Sierra Designs Pampero V.2 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Sierra Designs
Model Pampero V.2
Category Tents
File type PDF
File size 0.22 MB

All manuals for Sierra Designs Tents
More manuals of Tents

Frequently Asked Questions about Sierra Designs Pampero V.2 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more
Manual Sierra Designs Pampero V.2 Tent

Related products

Related categories