Manual Sierra Designs Moken 6 Tent

Manual

SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461

insert

incorrect

correct

Figure 3: Hub Hook with Spider Hub

S I E R R A D E S I G N S

Figure 5: Clip Loc

MOKEN 6

Your Sierra Designs

MOKEN 6 tent is

very easy to pitch and

maintain. Follow these in-

structions to pitch your tent

quickly, safely and easily.

MOKEN 6 TENT CONTENTS

Tent Body & Rainfly: 1 Line Tighteners: 6

Sleeping Rooms: 2 Pitching Instructions: 1

Tent Poles: 4 Pole Sack: 1

Tent Stakes: 12 Stake Sack: 1

Guy Cords: 6

* Sierra Designs tents include stakes for pitching the body and

fly under normal conditions. Additional stakes may be required

in severe conditions.

Figure 2: Correct Pole Assembly

Figure 1: Main Pole with Spider Hub

Figure 4: Tent body (top view)

Figure 6: Toggle/Ring

First Pitch

In order to familiarize yourself with your new tent, we sug-

gest that you grab a friend or relative and do a “test pitch”

before you enjoy your outdoor adventure.

Select a Site

Pitch the tent on a level area that is protected from wind

and shaded from the sun, if possible. It also important that

the campsite drains well, in case of rain. Clear the area of

debris such as sharp stones and sticks that might abrade or

puncture the tent floor.

Assemble the Poles

The Moken 6 comes with 3 poles. The main pole is connect-

ed via the “Spider Hub” (Figure 1) the remaining two poles

are of equal length with slight pre bends in them. Coming

from the center of the hub will be 4 longer poles and two

short poles. Assemble this pole first by carefully unfolding

the shock corded sections and allowing them to slide together.

Do not snap the pole sections together, as this could damage

the poles. Make certain that the insert for each pole section is

fully inserted into the next pole section, as well as, the “Spider

Hub” (Figure 2). Failure to do so may cause the poles to break.

Once assembled place to the poles to the side.

Lay Out Tent Body

Unfold the tent body and lay flat on the ground so that the

blue and grey rainfly is facing up. You will notice that the in-

ner tents and common room footprint are already attached to

the rainfly. By having these parts pre assembled it will make

the initial set-up of your Moken 6 much easier. Spread the tent

out so that you are able to find the “Hub Hook” (Figure 3).

This is located at the center of the tent (Figure 4, point M).

Once you have located the “Hub Hook” you will want to locate

the four navy blue stakeout loops (Figure 4, points A, B, G &

H). If you are pitching this tent by yourself we suggest that

you stake these four points down for an easier pitch.

Erect the Tent

Attach the “Hub Hook” to the loop on the underside of the

“Spider Hub” and that the two short poles are facing the tent

doors. Now, start with the end of the longer pole that is fac-

ing point A (Figure 4) and insert the pole tip into one of the

grommets. Follow this step for point G and then move to the

other side of the tent and repeat with points B & H. Once the

main pole structure is up attach the Swift Clips and Clip Locs

(do not attach bungee yet) along the A-H and B-G axis. You

now have two main body poles left. Each one of these poles are

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Sierra Designs Moken 6 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sierra Designs. They might be able to provide an original manual. Are you looking for the manual of your Sierra Designs Moken 6 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Sierra Designs Tents
More manuals of Tents

Frequently Asked Questions about Sierra Designs Moken 6 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.