Home > Camping & Outdoor > Tents > Sierra Designs Tents > Sierra Designs Lightning 2 Tent

Manual Sierra Designs Lightning 2 Tent

Need a manual for your Sierra Designs Lightning 2 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

LIGHTNING 2

(STANDARD & FL MODELS)

PITCHING INSTRUCTIONS

PACKAGE INCLUDES: Tent body with attached Rain Fly, 3 Hubbed Poles, Guy Cords, Stakes, 1 Pole/Stake Sack, Tent Stuff Sack.

STEP 6: Stake out the Gear Closet Wings and your tent

is completely set up.

STEP 2: Assemble pole. Lay it on the tent as shown

with gray/silver pole down the middle. The long

yellow/green pole should be in the front, the short

yellow/green pole in the rear. Make sure H-Clip is

facing down.

STEP 1: Find an even piece of ground; be sure area

is clear of debris. Layout your tent as shown. Stake

the 4 corners (circled).

STEP 3: Insert pole tips into the grommets located at

the four corners of the tent.

STEP 4: Attach H-Clips on the tent body to buttons on

bottom of Swivel Hubs (circled).

STEP 5: Attach all ultralight clips to the poles.

Attach Ball Cap connector on awning to ball end

of the ridge pole.

Swivel Hub with H-Clip

must face down.

Congratulations on the purchase of you new Sierra Designs tent! In order to familiarize yourself with

your new tent, we recommend you “test pitch” it before embarking on your wilderness adventure.

Ultralight Clips

Ball Cap Connector

Gear closet wing

Rating

Let us know what you think about the Sierra Designs Lightning 2 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sierra Designs Lightning 2 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sierra Designs Lightning 2 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sierra Designs Lightning 2 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sierra Designs. They might be able to provide an original manual. Are you looking for the manual of your Sierra Designs Lightning 2 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Sierra Designs
Model	Lightning 2
Category	Tents
File type	PDF
File size	1.16 MB

All manuals for Sierra Designs Tents
More manuals of Tents

Frequently Asked Questions about Sierra Designs Lightning 2 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more