Home > Camping & Outdoor > Tents > Sierra Designs Tents > Sierra Designs Clip Flashlight Tent

Manual Sierra Designs Clip Flashlight Tent

Need a manual for your Sierra Designs Clip Flashlight Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

S I E R R A D E S I G N S

SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461

Erect the Tent

Insert the metal tips of the longer “front arch” pole into the

grommets at points C and D (Figure 3). Clip the 2 Cam-Locs

™

located above the door at points I

and J onto the center section of

the pole, taking care not to twist

the webbing which connects the

Cam-Loc to the tent. Do not en-

gage the Cam-Loc at this time.

Attach the remaining Swift

Clips

™

, following the seam along the path

of the pole, between points C and D. Now, insert the metal

tips of the shorter “rear pole” into the grommets at points E

and F. Attach the Cam-Locs at points K and L and Swift Clips

to this pole in the same manner as the front pole. Once all the

clips are attached to both poles you may engage the Cam-Locs

by turning the key 180° until they lock completely onto the

pole. When the Cam-Loc is is engaged the key should be hori-

zontal (Figure 4).

Figure 5: Flysheet (top view)

Flysheet

Drape the fly over the tent and position the zipper over the

tent door (Figure 5). At points C, D, G and H are 1" side-re-

lease “fly clip” buckles. Clip these buckles into their

corresponding mates on the tent floor and pull the straps until

the fly is taut (Figure 6). By first clipping the blue webbing

strap on the rainfly to a blue webbing strap on the body, you

are guaranteed a fast, proper rainfly set-up every time. Now

pull points A and B out until the vestibule is taut and stake it

down in that position. You can use a guy line to guy out the fly

at points I, J, and K for increased ventilation.

Ventilation

The best air flow through the tent is obtained by pitching the

tent with the foot area into the wind. With the rainfly on, air-

flow is increased by guying out the rainfly away from the tent

walls. Additionally, the door can be folded back and tied in an

open position.

CLIP FLASHLIGHT TENT CONTENTS

Tent Body & Rainfly: 1 Pitching Instructions: 1

Tent Poles: 2 Stake Sack: 1

Tent Stakes: 9* Pole Sack: 1

Guy Cord: 2

* Sierra Designs tents include stakes for pitching the body and fly under normal conditions.

Additional stakes may be required in severe conditons.

First Pitch

In order to familiarize yourself with your new tent, we

suggest that you “test pitch” it before embarking on a

wilderness trip.

Select a Site

Look for a level spot that is protected from the wind in

order to ensure sleeping comfort. Clear the area of debris such

as sharp stones and sticks which might abrade or puncture the

tent floor. Choose an area that will drain well when it rains.

Unfurl the Tent and Assemble the Poles

Unfurl the tent and lay the tent floor flat on the ground with

the door unzipped. Carefully unfold the shock corded pole sec-

tions and allow them to slide together. Do not allow the poles

to snap together: This can lead to serious pole damage. Make

certain that the insert of each pole section is fully inserted into

the next pole section (Figure 1). You will have one long “front

arch” pole and one short “rear arch” pole (Figure 2).

Figure 1: Correct Pole Assembly

Figure 2: Arch Poles

Stake Out the Tent Floor

First stake down the webbing loops at the back of the tent at

points G and H (Figure 3). Then move to the front of the tent

and pull the webbing loops at points A and B until the floor is

square and semi-taut, and stake them down. Staking out points

C, D, E and F is recommended, especially in high winds.

CLIP FLASHLIGHT

Your Sierra Designs

CLIP FLASHLIGHT

tent is very easy to pitch

and maintain. Follow these

instructions to pitch your tent

quickly, safely and easily.

Figure 4: Cam-Loc

™

Figure 3: Tent Body (top view)

Figure 6: Fly Clip

Rating

Let us know what you think about the Sierra Designs Clip Flashlight Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sierra Designs Clip Flashlight Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sierra Designs Clip Flashlight Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sierra Designs Clip Flashlight Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sierra Designs. They might be able to provide an original manual. Are you looking for the manual of your Sierra Designs Clip Flashlight Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Sierra Designs
Model	Clip Flashlight
Category	Tents
File type	PDF
File size	0.17 MB

All manuals for Sierra Designs Tents
More manuals of Tents

Frequently Asked Questions about Sierra Designs Clip Flashlight Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more