Manual Sierra Designs Baku Tent

Need a manual for your Sierra Designs Baku Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

insert
correct
Figure 4: Clip-Loc
Figure 3: Tent Body (top view)
Figure 5: Tent Fly (top view)
SIERRA DESIGNS 2011 Cherry Street, Unit 202 Louisville, CO 80027 Phone: 303-262-3050 Fax: 303-262-3051 Toll Free: 800-635-0461
Erect the Tent
Insert the metal tips of one of the long poles into the grom-
mets at points A & D, and the tips of the other pole into
the grommets at points B & C. Pull the two poles up so
that they intersect at the center of the tent. Next, position
yourself in the open doorway and hook the Clip-Loc over
the widest angle of this intersection (do not attach the bun
-
geecord yet). Following the tent seams between A & D, and
B & C attach all of the Swift Clips to their corresponding
tent poles. Now take the remaining short pole and thread
it between the two main poles at the apex of the tent and
insert the tips into the grommets at points E & F (Figure
3). Now attach the bungee cord on the Clip-Loc at the apex
of the tent by wrapping the bungee in the direction cross
-
ing the open gate of the clip. Wrap the cord around the
pole intersection 2 to 4 times, depending on desired firm
-
ness, then slide the cord into the groove on the backside of
the clip to keep it taut (Figure 4).
Vestibule Section
Because the Baku has an integrated vestibule there is no
separate rainfly. To complete the set-up pull out point G
(Figure 5) until taut and then stake out. For increased sta
-
bility and strength in high winds, points H, I, J, & K, can
be guyed out.
Ventilation
roper ventilation is essential for creating a comfortable
living space inside your tent. The vestibule door panel can
be rolled away for maximum ventilation. In addition to
the above the Baku has been built with two vents, one on
each side of the tent, and a mesh panel on the back door. By
opening these vents and using the zipper at the top of the
vestibule you can regulate the ventilation.
First Pitch
In order to familiarize yourself with your new tent, we
suggest that you “test pitch” it before embarking on a
wilderness trip.
Select a Site
Look for a level spot that is protected from the wind in
order to ensure sleeping comfort. Clear the area of debris
such as sharp stones and sticks which might abrade or
puncture the tent floor. Choose an area that will drain
well when it rains.
Unfurl the Tent and Assemble the Poles
Unfurl the tent and lay the tent floor flat on the ground
with the door unzipped. Carefully unfold the shock corded
pole sections and allow them to slide together. Do not allow
the poles to snap together: This can lead to serious pole
damage. Make certain that the insert of each pole section is
fully inserted into the next pole section (Figure 1). You will
have two poles of equal length and one short pole. Each of
the longer poles will have two pre-bent sections at the end
of each pole (Figure 2).
Stake out the Tent Floor
Although the Baku is a freestanding tent, we suggest that
you always stake out the floor for greater safety and stability,
especially in high winds. First stake the webbing loops at
points A & B (Figure 3). Then move to the opposite side of
the tent, pulling the webbing loops at corners C & D until
the tent is squarely and tautly positioned, and then stake down.
S I E R R A D E S I G N S
Baku
Your Sierra Designs
BAKU tent is very easy to
pitch and maintain. Follow
these instructions to pitch
your tent quickly, safely
and easily.
Figure 1: Correct Pole Assembly
BAKU TENT CONTENTS
Tent Body w/ Pitching Instructions: 1
Integrated Fly: 1
Pole Sack: 1
Tent Poles: 3 Stake Sack: 1
Tent Stakes: 5*
Guy Cord: 4
* Sierra Designs tents include stakes for pitching the body and fly under normal conditions.
Additional stakes may be required in severe conditions.
Figure 2: Tent Poles
Download manual in English (PDF, 0.36 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Sierra Designs Baku Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Sierra Designs Baku Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Sierra Designs Baku Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sierra Designs Baku Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sierra Designs. They might be able to provide an original manual. Are you looking for the manual of your Sierra Designs Baku Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Sierra Designs
Model Baku
Category Tents
File type PDF
File size 0.36 MB

All manuals for Sierra Designs Tents
More manuals of Tents

Frequently Asked Questions about Sierra Designs Baku Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more
Manual Sierra Designs Baku Tent