Manual Sharper Image 206607 Massage Device

Manual

Thank you for purchasing the Sharper Image 3-In-1 Heated Neck

Therapy with Remote. Please take a moment to read this guide and

store it for future reference.

Item No. 206607

User Guide

3-IN-1 HEATED NECK THERAPY WITH REMOTE

- 1 -

FEATURES

• Ergonomic design vibratory massage button

• 3D intelligent fitting technology

• Easy to adjust neck electrodes

• Five modes: Thermal moxibustion, low-frequency electric

impulse, magnetic effect, ring traction and vibratory massage

• Two automatically combined electric impulse modes and four

manual electric impulse modes

• Several built-in magnets to promote microcirculation

• Includes a remote control

• LCD menus and backlight display for easy and clear operation

HOW TO OPERATE

Power Supply functions:

1. Operating the power supply with the adapter: Insert the output

and input plugs of the adapter (switching power supply) into the

port at the lower part of the massager and the AC power socket.

2. Operating the power supply with the built-in rechargeable battery:

The built-in rechargeable battery enables you to use the device

without cords. Simply charge the device using the included

adapter to use wire-free.

HOW TO OPERATE THE 3-IN-1 HEATED NECK

THERAPY WITH REMOTE

1. Shift the toggle switch to the “ON” position and then apply the

massager close to your neck. If there is some sweat on your neck,

wipe it off before using the device.

2. Hold the remote control and press the button “ ” to turn it on.

After you hear the buzzer beep once, the power supply indicator

will be on and the default program is enabled. The massager will

work under Impulse Mode 1, Intensity 01 and Level H of thermal

moxibustion, with a default time period of 15 minutes.

Optional: Use the remote control to adjust the massage mode and

intensity to your liking. When using the remote, you must aim it at the

massager’s receiving window. After the massager receives the infrared

ray signal successfully it will beep once for prompting.

3. There are six modes of intensity under the impulse mode “ ” for

selection. Mode 0 refers to stopping massage. The “+” button is to

increase the intensity by one level each time you press the button.

Press the “-” button to decrease the intensity. There are 16 levels

for adjustment. The default level is Level 1 when booting.

4. The button “ ” is for selecting thermal moxibustion mode. And

the “0” refers to stopping thermal moxibustion mode. Note: “L”

means low temperature and “H” high temperature. It defaults to

“H” when booting.

5. The button “ ” is for selecting vibration mode, with six sub-

modes of 1~6. “0” refers to stopping the vibration. Press the “+”

button once to increase the intensity by one level each time you

press the button. There are three levels for adjustment.

6. After the massage is completed, shift the toggle switch to “OFF”

to power the massager off. Stick the electrode slices on the

storage board for storage in a dry, well-ventilated place for next

use.

7. When the battery runs low, please charge it with the power

adapter provided with the massager. Otherwise, the massager will

automatically turn off after the indicator flickers.

8. When the remote control backlight flickers or becomes

insensitive, it is recommended to replace the button battery (Use

3V, CR2032 batteries only). The normal battery life is more than

three months.

Attention: When you use the remote control to operate the massager,

the IR receiving window on the massager and the IR sending window

on the remote control cannot be shielded. Aim the remote control at

the receiving window as much as possible to get the best sensitivity.

USE OF SILICON ELECTRODE SLICES

• Insert one end of the 2-core connector wires into the electrode

port and connect the other end to the electrode slices, then use

the massager as specified above. If they are used together with

the conductive plates there will be a difference in intensity due to

the parts they are applied to.

• The electrode slices should be clean on their surfaces without

any dust, oily or sticky substances. If their surfaces become dirty,

flush with clean water and then air dry them for repeated use.

• The electrode slices can be used about 80 times (20 minutes

each time). If their viscosity still cannot be recovered after

several times of cleaning, consider purchasing new ones.

• Only the electrode slices provided with the massager should be

used. Each electrode slice is 2.2” wide, 3.1” high and 0.09” thick

• Please dispose of electrode slices according to your local

environmental regulations rather than discarding them at will.

Note: It is recommended to use the massager one to two times a day,

10 to 20 minutes per massage, and 15-30 minutes in electric impulse

mode.

CHARGING THE BATTERY

• When the buzzer beeps continuously during a massage, the built-

in lithium battery is low and needs charging with the adapter.

Shift the toggle switch to “Charge” position. The power indicator

will turn green and flicker. When it is fully charged, the power

indicator will stay green. Charge time is 3 to 4 hours.

• The battery can be used for about one week (30 minutes a day)

after fully charging.

• Under normal use, the rechargeable battery supports 500

charges. When it is not in use for a long time, please charge it

once a month to prevent reducing its service life.

- 2 - - 3 - - 4- - 5- - 6-

WARNINGS

Note: Never use this massager with other electronic medical

devices such as pacemakers, artificial heart-lung machines,

electrocardiographs, etc. If device is used near a short-wave

microwave or microwave therapeutic equipment (within 3.3 ft.), it can

possibly result in damage.

• This massager should not be used by pregnant women or those

with sensitive skin, heart disease, abnormal blood pressure,

malignant tumors, cerebral vascular disease, acute disease, etc.

If in doubt, consult a doctor

• Do not use in the bath or while sleeping

• This device should never be used by children

• Do not use if you have sensitive skin (especially heat sensitivity)

• Don’t move this massager during use. When changing from one

massage area to the next, power it down first and then place it

on the desired area. Otherwise, serious irritation to the area can

occur

• Don’t disassemble this device and avoid placing it into water.

• Do not clean the massager with water

CLEANING AND MAINTENANCE

• Use a wet soft cloth or towel to wipe the massager.

• Store it in a dry and well-ventilated place.

• Don’t store it in a place with direct sunlight, high temperature or

moisture.

WARMING PROMPTS

• While using the massager, shift the toggle switch to “ON” first

and then aim the IR sending window on the remote control at the

IR receiving window on the massager. If the rechargeable battery

built in the massage runs low, charge it with a power adapter.

If the remote control cannot work normally, please replace the

button battery (CR2032) inside it.

• While charging, use a power adapter and then shift the toggle

switch to “Charge”.

Product name: 3-In-1 Heated Neck Therapy with Remote

Product Number: 206607

Power supply: 100-240VAC, 50/60Hz 0.2A converts into DC6V 800mA

or internal power supply 3.7V DC 1450mAh CR2032 button battery for

remote control: 3VDC

Impulse frequency: 1-1000Hz

Impulse width: 20-400μs

Impulse waveform: Square wave

Thermotherapy temperature: + 100.4°F+ 118.4° F

(ambient temperature: 77°F)

Size of packing box: 9.7 x 9.1 x 3 Inches

Weight: 1.4 lbs.

WARRANTY / CUSTOMER SERVICE

Sharper Image branded items purchased from SharperImage.

com include a 1-year limited replacement warranty. If you have any

questions not covered in this guide, please call our Customer Service

department at 1 (877) 210-3449. Customer Service agents are

available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.

The SHARPER IMAGE® name and logo are registered trademarks.

©Sharper Image. All Rights Reserved.

- 7- - 9- - 10 -

INTENSITY ADJUSTMENT

LCD DISPLAY

TIMER

POWER BUTTON

THERMAL MOXIBUSTION BUTTON

INTENSITY DECREASE BUTTON

VIBRATING MASSAGE BUTTON

ELECTRIC IMPULSE

THERMAL MOXIBUSTION

VIBRATING MASSAGE

INFRARED RAY SENDING WINDOW

ELECTRIC IMPULSE MASSAGE BUTTON

INTENSITY INCREASE BUTTON

ADAPTER

ELECTRODE SLICES

POWER PORT

POWER/CHARGING SWITCH

PORT FOR ELECTRODE SLICE

POWER SUPPLY INDICATOR

CONDUCTIVE/HEATING PLATE

INFRARED RAY RECEIVING WINDOW

PROBLEM POSSIBLE CAUSE SOLUTION

The massager

fails to turn on.

Check if its toggle switch is

shifted to “ON”.

Please shift its toggle switch to “ON”.

Check if the IR sending window on the

remote control aims at the IR receiving

window on the massager.

Please aim at the receiving window first and

then operate.

Check if the remote control display is on. If the display is not on replace the CR2032

button battery in the remote control.

Check if the built-in rechargeable battery

is low.

If the battery is low charge it.

Check if the charging is normal. Connect the power adapter properly. If it is

properly connected, the charging indicator will

be on and flicker.

The massager

cannot be

charged or has

no display in

charging.

See if the power adapter is properly

connected.

Insert the plug of the power adapter properly.

It displays

normally but no

response

or stimulation

could be felt.

Check to see if the toggle switch of the

massager is shifted to “Charge” position.

Confirm its toggle switch is shifted to “Charge”

position.

Check to see if the electrodes contact

close to your neck skin.

The electrode slices must contact close to your

neck skin.

Check if there are some hairs, clothes,

accessories, etc. at the contact area of

electrode slices and your skin.

Remove or separate such objects.

There is a sense

of tingling.

Check to see if the massage intensity is

adjusted.

The intensity is defaulted to Level 1 when

booting and needs adjusting; or some users are

not sensitive to the intensity in Level 1 to 2 and

could increase the intensity properly.

Check to see if the electrode slices contact

close to your neck skin.

Wet your neck skin with a wet towel first and

then contact the electrode slices close to the

skin, and then adjust properly the intensity and

massage mode.

The massage lasts too long. Use the massager for 10 to 20 minutes with

every use. Do not exceed using the device twice

a day.

Adjust the massage intensity. Properly reduce the intensity.

Check to see if your skin is allergic to

electrode slices.

If your skin has a history of allergic reactions

reduce the massage time; if serious, please stop

using the massager and seek for desensitization

treatment.

The cold weather causes your skin to

be dry.

Wet your skin and the surface of electrode slices

with a wet towel.

PROBLEM POSSIBLE CAUSE SOLUTION

There is no

sense of

tingling.

Use the massager after staying up late. Please use it the next day as the electrolyte

reduces after staying up late.

Check to see if there are some hairs

or accessories at the contact area of

electrodes and your skin.

Please remove or separate the accessories

or hairs.

The stimulation

is weak.

Make sure your skin contact

is close to electrode slices.

Contact electrodes close to your skin and then

adjust the intensity.

Check if there is some dirt or oil

stain on electrode slices.

Clean the surfaces.

Check if the rechargeable

battery is low.

If it’s running low, please use an external power

supply to provide the power.

A red mark is

left after use.

Pay attention to any tingling while in use

and monitor products used.

Stop using the massager and the red mark will

generally disappear in 3 to 5 days.

- 8 -

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Sharper Image 206607 Massage Device. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sharper Image. They might be able to provide an original manual. Are you looking for the manual of your Sharper Image 206607 Massage Device in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Sharper Image Massage Devices
More manuals of Massage Devices

Related products

Manual

Sharper Image 207680 Massage Device

Manual

Sharper Image 205990 Massage Device

Manual

Sharper Image 205087 Massage Device

Manual

Sharper Image 205761 Massage Device

Manual

Sharper Image 207558 Massage Device

Manual

Sharper Image 207017 Massage Device

Manual

Sharper Image 205471 Massage Device

Manual

Sharper Image 207658 Massage Device

Related categories