Home > Audio, TV & Photo > Projectors > Sharp Projectors > Sharp DT-300 Projector

Manual Sharp DT-300 Projector

Need a manual for your Sharp DT-300 Projector? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

-2

WARNING:

The cooling fan in this projector continues to run for about 90 seconds after the projector enters the standby mode.

During normal operation, when putting the projector into the standby mode always use the STANDBY button on the

projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.

DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.

FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.

INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the operation manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

U.S.A. ONLY

Declaration of Conformity

SHARP PROJECTOR, MODEL DT-300

This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Responsible Party:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430

TEL: 1-800-BE-SHARP (1-800-237-4277)

U.S.A. ONLY

WARNING:

Some IC chips in this product include confidential and/or trade secret property belonging to Texas Instruments.

Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer, reverse assemble or discompile

the contents thereof.

LAMP REPLACEMENT

BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.

HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE

REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP

UNIT TYPE BQC-XVZ200++1 ONLY. UV RADIATION : CAN CAUSE

EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING.

HIGH PRESSURE LAMP : RISK OF EXPLOSION.

POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS

RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.

DU REMPLACEMENT DE LA LAMPE.

PRECAUTIONS A OBSERVER LORS

DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.

L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE

1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.

NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XVZ200++1.

RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.

ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.

LAMPE A HAUTE PRESSION : RISQUE D’EXPLOSION.

DANGER POTENTIEL DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.

A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.

CAUTION

Caution Concerning the Lamp Replacement

There is potential glass particles hazard if the lamp ruptures.

DT-300̲E̲p01̲03.p65 03.10.29, 2:37 PMPage 2 AdobePageMaker6.5J/PPC

Download manual in English (PDF, 5.69 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Sharp DT-300 Projector by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sharp DT-300 Projector?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sharp DT-300 Projector. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Sharp DT-300 Projector. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sharp. They might be able to provide an original manual. Are you looking for the manual of your Sharp DT-300 Projector in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Sharp
Model	DT-300
Category	Projectors
File type	PDF
File size	5.69 MB

All manuals for Sharp Projectors
More manuals of Projectors

Frequently Asked Questions about Sharp DT-300 Projector

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I power off my projector immediately after use? Verified

After using the projector the lamp is still very hot. It is best to leave the projector on after use, giving the internal fan time to do it's work and cool the lamp. This will extend the lifetime of the lamp.

This was helpful (215) Read more

What is keystone correction? Verified

A projector can often not be placed straight in front of a screen or wall. The projected image can become distorted because of this. This is the keystone effect. Keystone correction is a feature that addresses this distortion. Not all projectors offer keystone correction.

This was helpful (159) Read more

What is the contrast ratio? Verified

The contrast ratio tells how far the whitest white is from the blackest black. A contrast ratio of for example 400:1 means that the blackest black on screen is 400 times darker than the whitest white. A high contrast ratio contributes to the sharpness of the image.

This was helpful (105) Read more