Home > Business equipment > Safes > SentrySafe Safes > SentrySafe A3819 Safe

Manual SentrySafe A3819 Safe

Name: SentrySafe A3819 Safe
Brand: SentrySafe
SKU: A3819
Rating: 80 (5 reviews)

Need a manual for your SentrySafe A3819 Safe? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 3 comments and has 5 votes with an average product rating of 80/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Gain entry with the basic electronic lock

The handle should be all of the way UP, in the

horizontal position before attempting to open safe.

Opening your safe for the ﬁrst time (keep door

open during setup):

1. Insert a paper clip or pen point into

the small hole of the battery cover located

directly below the keypad. Push in while

sliding cover to the right (Fig. B).

2. Disconnect and remove battery holder.

• Insert 4 new AA batteries (not included)

to power this lock.

• Reconnect the battery holder and put back into proper

position. Slide battery cover back in place.

NOTE: The yellow LED will light when the batteries need

to be replaced.

Simply insert the key (if equipped) in the lock and

turn until the plunger pops out. Remove key.

4. Enter the factory code (printed on the ﬁrst page of this

guide). When the green light appears, you have four

seconds to turn the handle down to open. Try this several

times before proceeding to the next step.

To unlock safe:

Enter the 5-digit factory code, a pre-programmed user code,

or a pre-programmed user pin (programming instructions

to follow). When the green LED lights you have 4 seconds

to turn the handle and open the safe.

To lock safe:

Close the door and return the handle to the horizontal

position. For greatest security, depress the key lock

(if equipped) with your ﬁnger.

NOTE: If your unit is equipped with a water-resistant

gasket additional pressure to the left corner of the door

may be required before the handle can be returned to the

horizontal position.

Access codes

There are 3 possible ways to unlock and access the safe:

1. Factory code

(Found on the front cover of this guide.) You can always

open the safe by entering the pre-set 5-digit factory code.

This code cannot be deleted.

2. User code

If you prefer to employ your own code, you can program

the safe to open using a 5-digit user code of your choice.

3. User pin

If you wish to give someone else temporary access to the

safe, you can program a 5-digit user pin that can later

be erased.

Programming the user code

NOTE: One (1) user code is allowed.

To add:

1. Press the Prog key , then enter the 5-digit factory code.

2. Enter the 5-digit user code of your choice.

To delete:

1. Press the Prog key.

2. Enter the 5-digit factory code twice.

Programming user pin

NOTE: One (1) user pin is allowed.

To add:

1. Press the Prog key 2 times.

2. Enter your 5-digit user code.

3. Enter the 5-digit user pin of your choice.

To delete:

1. Press the Prog key 2 times.

2. Enter your 5-digit user code.

3. Enter 0, 0, 0, 0, 0.

NOTE: If your safe does not appear to be working, please

check batteries before calling Sentry Customer Care.

Signals

Your electronic-lock safe communicates by means of several

audio/visual signals.

Red (Error) LED + three beeps indicates one

of the following:

1. You have pressed Program key out of sequence.

2. You have entered an invalid code or user pin.

3. You have let 5 seconds or more elapse between

key presses.

4. Lights after three consecutive invalid codes are input

(2-minute delay mode).

Green LED only:

1. Comes ON after you enter a valid code and remains

lit during the 4-second period in which the safe can be

opened.

2. Comes ON in the Programming mode and remains

lit until you have ﬁnished entering a 5-digit code.

Yellow LED only:

1. Comes ON when the batteries need to be replaced.

123

4 5 6

789

123

4 5 6

789

Rating

Let us know what you think about the SentrySafe A3819 Safe by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the SentrySafe A3819 Safe?
Yes No

80%

20%

5 votes

Join the conversation about this product

Here you can share what you think about the SentrySafe A3819 Safe. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

DANIEL 09-01-2023
I purchased a Sentry Safe T6-331 safe. T633AE1329000991. With ELECTRON67L lock + Security key. And I have a problem to open it because the batteries must be worn out and I can't enter the emergency key when this problem happens so I know what to do?. If anyone can let me know that would be very nice of them.

reply | This was helpful (6) (Translated by Google)

Robert Ramos 02-05-2022
Ser, i have a Sentry vault model A3819 i already change the batteries, when i connect it, it still didn't work, their still no light in the indicator, we tried to use the key, still it didn't open, can you give us the possible solution, thanks

reply | This was helpful (3)

julien. 08-01-2023
hello my a4835 safe is open but I can no longer close it do you have the solution thank you

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your SentrySafe A3819 Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact SentrySafe. They might be able to provide an original manual. Are you looking for the manual of your SentrySafe A3819 Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	SentrySafe
Model	A3819
Category	Safes
File type	PDF
File size	1.28 MB

All manuals for SentrySafe Safes
More manuals of Safes

Frequently Asked Questions about SentrySafe A3819 Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The lock on my electronic safe won't open, but I am sure the code I enter is correct. What can I do? Verified

This can happen when the batteru voltage is too low. This can be caused by cheap or nearly empty batteries. Replace the batteries and try again. If this does not solve the problem you should contact the manufacturer.

This was helpful (1314) Read more

I lost the combination of my safe, what can I do? Verified

In the case of a safe with an electronic lock, there is often an included emergency key with which the safe can still be opened. If no emergency key or other solution is available, there are specialized companies that can help. However, in the case of a small safe, the cost of a specialist may be higher than that of a new safe. In that case, the last option is to break open the safe.

This was helpful (615) Read more

When is it a good idea to secure my safe? Verified

In general it's a good idea to secure safes of 1000 kilogram or less. This prevents a thief to steal the entire safe. It's also possible that an insurance company demands a safe to be secured. Always have your safe secured by a specialist.

This was helpful (179) Read more