Home > Audio, TV & Photo > LCD Televisions > Sanyo LCD Televisions > Sanyo FW50D36F LCD Television

Manual Sanyo FW50D36F LCD Television

Need a manual for your Sanyo FW50D36F LCD Television? Below you can view and download the PDF manual for free in English. This product currently has 13 frequently asked questions, 1 comment and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11.

Only use attachments / accessories specified by the

manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart /

apparatus combination to avoid injury

from tip-over.

13.

Unplug this apparatus during lightning storms or when

unused for long periods of time.

14.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, speciﬁes

that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry

as practical.

Example of Antenna Grounding as per NEC -

National Electric Code

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC SERVICE EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

POWER SERVICE GROUNDING ELECTRODE

SYSTEM (NEC ART 250, PART H)

GROUND CLAMPS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If

the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11.

Only use attachments / accessories specified by the

manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart /

apparatus combination to avoid injury

from tip-over.

13.

Unplug this apparatus during lightning storms or when

unused for long periods of time.

14.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, speciﬁes

that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry

as practical.

Example of Antenna Grounding as per NEC -

National Electric Code

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC SERVICE EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

POWER SERVICE GROUNDING ELECTRODE

SYSTEM (NEC ART 250, PART H)

GROUND CLAMPS

Wall Mount Bracket Kit

Brand Model # Screw dimension

FW50D36F

SANUS

VuePoint

F80B M6 x 0.472" (12mm)

• The recommended Wall Mount Bracket Kit (sold

separately) allows the mounting of the TV on the

wall.

• For detailed information on installing the wall mount,

refer to the Wall Mount Instruction Book.

• Funai is not responsible for any damage to the

product or injury to yourself or others if you elect to

install the TV Wall Mount Bracket or mount the TV

onto the Bracket on your own.

• The Wall Mount Bracket must be installed by

experts.

Funai is not liable for these types of accidents or

injuries noted below.

• Install the Wall Mount Bracket on a sturdy vertical wall.

• If installed onto a ceiling or slanted wall, the TV and

Wall Mount Bracket may fall which could result in a

severe injury.

• Do not use screws that are longer or shorter than their

specified length. If screws too long are used this may

cause mechanical or electrical damage inside the TV

set. If screws too short are used this may cause the TV

set to fall.

• Do not fasten the screws by excessive force. This may

damage the product or cause the product to fall,

leading to an injury.

• For safety reasons use 2 people to mount the TV onto

a Wall Mounting Bracket.

• Do not mount the TV onto the Wall Mounting Bracket

while your TV is plugged in or Turned On. It may result

in an electrical shock injury.

When installing the unit on the wall, allow this much space.

Top: 11.8 inches (30cm)

Left and right side: 5.9 inches (15cm)

Bottom: 3.9 inches (10cm)

4 .English

Rating

Let us know what you think about the Sanyo FW50D36F LCD Television by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Sanyo FW50D36F LCD Television?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Sanyo FW50D36F LCD Television. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Andy freehill 24-01-2024
Is this model a “smart” tv?

reply | This was helpful (0)

More about this manual

We understand that it’s nice to have a paper manual for your Sanyo FW50D36F LCD Television. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Sanyo. They might be able to provide an original manual. Are you looking for the manual of your Sanyo FW50D36F LCD Television in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Sanyo
Model	FW50D36F
Category	LCD Televisions
File type	PDF
File size	10.32 MB

All manuals for Sanyo LCD Televisions
More manuals of LCD Televisions

Frequently Asked Questions about Sanyo FW50D36F LCD Television

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I connect a universal remote control to my television? Verified

To connect your universal remote control, you need the model number and brand name of both the remote control and the television. There is a list of codes for brands and model numbers in the manual of the remote control .

This was helpful (2104) Read more

I want to connect a speaker to my LCD television with HDMI, which port should I use? Verified

You need to use the HDMI-ARC port, which is specifically made for connecting audio equipment.

This was helpful (1431) Read more

Does it matter to which HDMI port I connect my device? Verified

In general you can connect a device like a blu-ray player or game console to any HDMI port. The device can then be used by selecting the corresponding HDMI channel on your television.

This was helpful (745) Read more

How do I measure the inches of my LCD television? Verified

Measuring the inches on your LCD television is done by measuring the diagonal distance between for example the upper left corner and the lower right corner of the screen (not the edge). One inch equals 2,54 centimeter, so when you measure 99 centimeter, this means your LCD television is 39 inches.

This was helpful (529) Read more

Will my remote control also work on other television models of the same brand? Verified

Often a remote control of a television will also work on similar models of the same brand. However, it is unusual that it will work on all models of that brand. Universal remote controls are more suited to do this.

This was helpful (308) Read more

What is the difference between LCD and LED? Verified

Both techniques use an LCD screen that emits no light by itself. The difference is in the lighting behind the screen. With LCD screens this is done by CCFL (cold-cathode fluorescent lamp) and LED makes use of LED lights.

This was helpful (282) Read more

Can I repair a dead pixel myself? Verified

There is a difference between a dead pixel and a stuck pixel. A stuck pixel is still coloured and might be fixed by applying light pressure exactly onto the pixel until it restores itself. A dead pixel is always black or white and can't be repaired by yourself.

This was helpful (273) Read more

What does HDMI stand for? Verified

HDMI stands for High-Definition Multimedia Interface. HDMI is a connection to send high quality video and audio from one device to another.

This was helpful (247) Read more

Why are there letters next to the numbers on the remote control? Verified

Certain television settings may require you to enter letters. There are usually three letters or other characters on a button. When letter input is required, you can press that button once for the first letter, press twice for the second letter and press 3 times for the third letter. This way, text can be written with a minimum number of buttons.

This was helpful (228) Read more

What is the contrast ratio? Verified

The contrast ratio tells how far the whitest white is from the blackest black. A contrast ratio of for example 400:1 means that the blackest black on screen is 400 times darker than the whitest white. A high contrast ratio contributes to the sharpness of the image.

This was helpful (201) Read more

What is the optimal viewing distance for my television? Verified

This partially depends on personal preference, but as a rule of thumb the optimal viewing distance is about 3x the diagonal screen size of the television. For a television of 60 inch (152cm) the optimal viewing distance would be 180 inch or about 4.5 meter.

This was helpful (196) Read more

How can I properly clean my LCD television? Verified

Turn off the television and wipe dust and dirt off the screen with a microfiber cloth. Do not use paper, this can cause scratches. Do not apply too much pressure or you might cause damage to pixels. Use a specialized detergent or make one by mixing 1 part vinegar with 1 part water. Moisten the cloth with the detergent and clean the screen. Make sure the cloth is not too wet. Remove stains by making rotating movements. Dry the screen with a second microfiber cloth to prevent stripes.

This was helpful (194) Read more