Manual Samsung PS51E530A3R Plasma Television

Manual

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

Remote Control

✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

specifications may be changed without notice.

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more

than several minutes as it can cause screen image retention. This image retention is also

known as “screen burn”. To avoid such image retention, reduce the degree of brightness

and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from

the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in

the surrounding environment such as temperature or humidity. This is normal and not a

defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels

which require sophisticated technology to produce. However, there may be a few bright

or dark pixels on the screen. These pixels will have no impact on the performance of the

product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave

traces of borders displayed on the left, right and centre of the screen

caused by the difference of light emission on the screen. Playing a DVD or

a game console may cause similar effects to the screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time

may produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still images

for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to

ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in

the internal temperature of the product.

✎ When using a stand or wall-mount, use parts provided by Samsung

Electronics only.

x If you use parts provided by another manufacturer, it may result in a problem

with the product or an injury due to the product falling.

✎ The appearance may differ depending on the product.

✎ Be careful when you contact the TV because some parts can be somewhat

hot.

Installation with a stand. Installation with a wall-mount.

10cm

10cm

10cm

10cm

10cm

10cm

10cm

Picture Reset

Resets your current picture mode to its default settings.

■

Reset Picture Mode: Returns all picture values in the currently

selected mode to the default settings.

Sound Menu

Mode

t

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sound to allow a

better listening experience for the hearing impaired.

Equalizer

(standard sound mode only)

■

Balance: Adjusts the balance between the right and left speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the level of specific bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

t

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head Related

Transfer Function) technology.

Auto Volume

Because each broadcasting station has its own signal conditions,

the volume may fluctuate each time channel is changed. This feature

lets you automatically adjust the volume of the desired channel by

lowering the sound output when the modulation signal is high or by

raising the sound output when the modulation signal is low.

SPDIF Output

SPDIF (Sony Philips Digital InterFace) is used to provide digital sound,

reducing interference going to speakers and various digital devices

such as a DVD player.

■

Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output (SPDIF) format may differ

depending on the input source.

✎ By connecting to 5.1ch speakers in a Dolby Digital setup,

maximize your interactive 3D sound experience.

■

Audio Delay: Correct audio-video sync problems, when watching

TV or video, and when listening to digital audio output using an

external device such as an AV receiver (0ms ~ 250ms).

Speaker Select

■

Speaker Select (External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding speed

between the main speaker and the audio receiver. In this case, set

the TV to External Speaker.

✎ When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the sound

settings will be limited.

✎ When Speaker Select is set to External Speaker.

• TV Speaker: Off, External Speaker: On

✎ When Speaker Select is set to TV Speaker.

• TV Speaker: On, External Speaker: On

✎ If there is no video signal, both speakers will be mute.

Selecting the Sound Mode

t

When you set to Dual l ll, the current sound mode is displayed on

the screen.

Audio Type Dual I-II Default

A2 Stereo

Mono Mono

Automatic

change

Stereo

Stereo

↔

Mono

Dual

Dual I

↔

Dual II

Dual I

NICAM

Stereo

Mono Mono

Automatic

change

Stereo

Mono

↔

Stereo

Dual

Mono

↔

Dual I



Dual II



Dual I

✎

If the stereo signal is weak and an automatic switching occurs,

then switch to the mono.

✎

Only activated in stereo sound signal.

✎ Only available when the Input source is set to TV.

Sound Reset

■

Reset All: Reset all sound settings to the factory defaults.

Setup Menu

❑ Setting the Time

Time

✎ The current time will appear every time you press the INFO

button.

■

Clock Set: Set the Day, Month, Year, Hour, Minute.

■

Sleep Timer

t

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎ To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the

clock first.

■

On Time / Off Time: Set the hour, minute and Activate / Inactivate.

(To activate the timer with the setting you have chosen, set to

Activate.)

■

Volume: Set the desired volume level.

■

Contents: When the On Time is activated, you can turn on a

specific channel or play back contents such as photo or audio

files.

- TV/USB: Select TV or USB. (Make sure that an USB device is

connected to your TV.)

- Antenna: Displays the current antenna source.

- Channel: Select the desired channel.

- Music/Photo: Select the folder containing MP3/JPEG files on

the USB device.

✎ The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎ The media may not be playing smoothly when using the

device lower than USB 2.0.

■

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun

or Manual to set at your convenience. If you select Manual, you

can set up the day you want to activate the timer.

Security

✎ The PIN input screen appears before the setup screen.

✎ Enter your 4-digit PIN, the default of which is “0-0-0-0”.

Change the PIN using the Change PIN option.

x Child Lock (Off / On): Lock channels in Channel List, to

prevent unauthorized users, such as children, from watching

unsuitable programme.

✎ Only available when the Input source is set to TV.

x Change PIN: Change your password required to set up the TV.

✎ If you forget the PIN code, press the remote control buttons

in the following sequence in Standby mode, which resets

the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

Language

Set the menu language.

✎ Select Language and press the ENTER

E

button.

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjusts the brightness of the TV in order to reduce power

consumption. If you select Picture Off, the screen is turned

off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

Eco Sensor (Off / On) : To enhance your power savings; the

picture settings will automatically adapt to the light in the room.

✎ If you adjust the Cell Light, the Eco Sensor will be set to

Off.

Min Cell Light: When Eco Sensor is On, the minimum screen

brightness can be adjusted manually.

✎ If Eco Sensor is On, the display brightness may change

(become slightly darker in most cases) depending on the

surrounding light intensity.

■

No Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid

unnecessary energy consumption, set how long you want the TV

to remain on if it’s not receiving a signal.

✎ Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

Auto Protection Time

■

Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour):

If the screen remains idle with a still image for a certain period of

time defined by the user, the screen saver is activated to prevent

the formation of ghost images on the screen.

General

■

Game Mode (Off/On): When connecting to a game console

such as PlayStation™ or Xbox™, you can enjoy a more realistic

gaming experience by selecting the game mode.

x Precautions and limitations for game mode

- To disconnect the game console and connect another

external device, set Game Mode to Off in the setup

menu.

- If you display the TV menu in Game Mode, the screen

shakes slightly.

x Game Mode is not available in TV mode.

x After connecting the game console, set Game Mode to

On to prevent poor picture quality. Unfortunately, you may

notice reduced picture quality

■

Melody: Set so that a melody plays when the TV is turned off,

Low, Medium and High.

✎ The Melody does not play.

- When no sound is output from the TV because the MUTE

button has been pressed.

- When no sound is output from the TV because the volume

has been reduced to minimum with the VOL – button.

- When the TV is turned off by Sleep Timer function.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

continues to occur, check the colour pattern.

■

Sound Test: Use the built-in melody sound to check for sound

problems.

■

Reset: Reset all settings to the factory defaults.

✎ The PIN input screen appears before the setup screen.

✎ Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

firmware from “www.samsung.com” to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the

TV.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can find information

regarding our call centres, and how to download products and

software.

Plasma TV

user manual

Getting Started

Accessories

• Remote Control & Batteries (AAA x 2)

• Owner’s Instructions

• Warranty Card / Safety Guide (Not

available in some locations)

• Cleaning Cloth

• Power Cord

Input Cables (Sold Separately)

HDMI HDMI-DVI Component

Composite (AV) Coaxial (RF)

TV Controller (Panel Key)

Remote control sensor TV Controller

Function menu

Down (Front)

Up (Rear)

Right

Left

Media.P

m R

P

Return

Power on

Turns the TV on by pressing the controller in

standby mode.

Adjusting the volume

Adjusts the volume by moving the controller from

side to side when the power is on.

Selecting a channel

Selects a channel by moving the controller up and

down when the power is on.

Using the function menu

Press the controller when the power is on, then the

function menu screen appears. If you press it again,

the function menu screen disappears.

Using the Menu (m)

Selects the Menu(m) by moving the controller in

the function menu screen. The OSD(On Screen

Display) of your TV’s feature appears.

Selecting the Source ( )

Selects the Source( ) by moving the controller in

the function menu screen. The Source List screen

appears.

Selecting the Media Play

Selects the MEDIA.P by moving the controller in

the function menu screen. The Media Play main

screen appears.

Power Off (

P

)

Selects the Power Off (

P

) to turn the TV off by

moving the controller in the function menu screen.

✎ Exits the menu when pressing the controller more than 1 second.

✎ When selecting the function by moving the Controller to the up/down/left/

right directions, be cautious not to press the Controller unconsciously. If

you press it, you cannot select the desired function.

Plug & Play

When you turn the TV on for the first time, a sequence of on-screen

prompts will assist in configuring basic settings. Press the POWER

button. Plug & Play is available only when the Input source is set to

TV.

✎ Connecting the power cord and antenna. (refer to

‘Connections’)

Selecting a language

Select the OSD Language.

Language

U

Move

E

Enter

Plug & Play









English

Indonesia

d

Select the desired OSD (On Screen

Display) language.



Selecting a Home Use mode

Select 'Home Use' when installing this TV in your home.

L

Move

E

Enter

Plug & Play

Home Use

Store Demo









• Select the Home Use mode.

Store Demo mode is for retail

environments.

• When pressing TV controller, the

function menu screen appears.

Select the Menu(m) and press

it more than 5 seconds using the

controller. The Store Demo mode

is set. Cancel the Store Demo by

selecting Source( ) and pressing

it more than 5 seconds.



Selecting an Area

Select Area.

Area : Asia/Europe

Plug & Play

E

Enter









Press the ► / ENTER

E

button. Press

the ▲ or ▼ button, then press the

ENTER

E

button to select the

appropriate area.



Auto Store

The channel search will start automatically.



Setting the Clock Set

Set current date and time

Day Month Year

01 01 2012

Hour Minute

23 00

L

Move

U

Adjust

E

Enter

m

Skip

Clock Set

d

d

Press the ◄ or ► button to select Day,

Month, Year, Hour and Minute.

Set these by pressing the ▲ / ▼ / ◄

/ ► button, and press the ENTERE

button to go next step.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the ENTER

E

button.

Picture Menu

Mode

t

Select your preferred picture type.

■

Dynamic: Suitable for a bright room.

■

Standard: Suitable for a normal environment.

■

Movie: Suitable for watching movies in a dark room.

Cell Light / Contrast / Brightness / Sharpness /

Colour / Tint (G/R)

Your television has several setting options for picture quality control.

Advanced Settings

(available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a more

precise picture.

■

Colour Space (Auto / Native): Adjusts the range of colours

available to create the image.

■

White Balance: Adjust the colour temperature for a more natural

picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green,

blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue)

brightness.

Reset: Resets the White Balance to its default settings.

■

Gamma: Adjusts the primary colour intensity.

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the

screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest): Select the black level

to adjust the screen depth.

■

Flesh Tone: Emphasize pink “Flesh Tone”.

■

Motion Lighting (Off / On): Reduce power consumption by

brightness control adapted motion.

✎ Only available in Standard mode.

Picture Options

■

Colour Tone (Cool / Standard / Warm1 / Warm2)

✎ Warm1 or Warm2 will be deactivated when the picture mode

is Dynamic.

■

Size: Your cable box/satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use 16:9

mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnifies the picture size more than 4:3.

✎ Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen

size.

4:3: Sets the picture to basic (4:3) mode.

✎ Do not watch in 4:3 format for a long time. Traces of borders

displayed on the left, right and centre of the screen may

cause image retention (screen burn) which are not covered by

the warranty.

Screen Fit: Displays the full image without any cut-off when HDMI

(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are

inputted.

✎ NOTE

x After selecting Screen Fit in HDMI (1080i / 1080p) or

Component (1080i / 1080p) mode: Adjusts the Position or

Size by using ▲, ▼, ◄, ► button.

x Depending on the input source, the picture size options may

vary.

x The available items may differ depending on the selected

mode.

x Settings can be adjusted and stored for each external device

connected to an input on the TV.

x If you use the Screen Fit function with HDMI 720p input,

1 line will be cut at the top, bottom, left and right as in the

overscan function.

■

Digital Noise Filter (Off / Low / Medium / High / Auto): If the

broadcast signal received by your TV is weak, you can activate the

Digital Noise Filter feature to reduce any static and ghosting that

may appear on the screen.

✎ When the signal is weak, try other options until the best

picture is displayed.

■

HDMI Black Level (Low / Normal): Selects the black level on the

screen to adjust the screen depth.

✎ Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto): Sets the TV to automatically sense and

process film signals from all sources and adjust the picture for

optimum quality.

✎ Available in TV mode, AV, COMPONENT (480i / 1080i) and

HDMI (480i / 1080i).

■

Screen Burn Protection : To reduce the possibility of screen

burn, this unit is equipped with screen burn prevention technology.

The Time setting allows you to programme the time between

movement of the picture in minutes.

x Pixel Shift (Off / On) : Using this function, you can minutely

move pixels on the PDP in horizontal or vertical direction to

minimize after image on the screen.

✎ Optimum condition for pixel shift

Item TV/AV/Component/HDMI

Horizontal 0~4 4

Vertical 0~4 4

Time (minute) 1~4 min 4 min

✎ The Pixel Shift value may differ depending on the monitor

size (inches) and mode.

✎ This function is not available in the Screen Fit mode.

x Scrolling: This function removes after-images on the screen by

moving all the pixels on the PDP according to a pattern. Use this

function when there are remaining after images or symbols on the

screen, especially when you displayed a still image on the screen

for a long time.

✎ The after-image removal function has to be executed for a

long time (approximately 1 hour) to effectively remove after-

images on the screen. If the after-image is not removed after

performing the function, repeat the function again.

✎ Press any key on the remote control to cancel this feature.

■

Side Grey (Light / Dark): When you watch TV with the screen ratio

set to 4:3, the screen is prevented from any damage by adjusting

the white balance on both extreme left and right sides.

Channel Menu

❑ Seeing Channels

Channel List

Select a channel in the All Channels, Added Channels,

Favourites or Programmed screen by pressing the ▲ / ▼

buttons, and pressing the ENTER

E

button. Then you can watch

the selected channel.

Added Channels

a 5 Air

a 6 ♥ TV #6

a 7 ♥ TV #7

a 8 Air

a 9 Air

a 9 ♥ TV #9

a 10 Air

a 11 ♥ TV #11

a 12 ♥ TV #12

B

Zoom

C

Select T Tools

■

All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■ *

Favourites: Shows all Favourite channels.

■

Programmed: Shows all currently reserved Programmes.

✎ Using the remote control buttons with the Channel List

x Green (Zoom): Enlarges or shrinks a channel number.

x Yellow (Select): Selects multiple channel lists. Select desired

channels and press the Yellow button to set all the selected

channels at the same time. The

c

mark appears to the left of

the selected channels.

x

T

(Tools): Displays the Channel List option menu. (The

Options menus may differ depending on the situation.)

Channel Status Display icons

Icons Operations

c

A channel selected.

*

A channel set as a Favourite.

\

A locked channel.

)

A reserved programme.

❑ Retuning Channels

Area

You can change the desired area.

Auto Store

(depending on the country)

Scans for a channel automatically and stores in the TV.

✎ Automatically allocated programme numbers may not

correspond to actual or desired programme numbers. If a

channel is locked, the PIN input window appears.

Manual Store

Scans for a channel manually and stores in the TV.

✎ If a channel is locked, the PIN input window appears.

✎ According to channel source, Manual Store may be

supported.

✎ Programme, Colour System, Sound System, Channel,

Search, Store: If there is abnormal sound or no sound,

reselect the sound standard required.

✎ Channel mode

x P (Programme): When tuning is complete, the broadcasting

stations in your area have been assigned to position

numbers from P0 to P99. You can select a channel by

entering the position number in this mode.

x C (aerial channel mode) / S (cable channel mode): These

two modes allow you to select a channel by entering the

assigned number for each aerial broadcasting station or

cable channel.

Channel List Option Menu

t

Set each channel using the Channel List menu options (Add/

Delete, Add to Favourite/Delete from Favourite, Timer Viewing,

Lock/Unlock, Edit Channel Name, Sort, Select All/Deselect

All, Auto Store). Option menu items may differ depending on the

channel status.

Set each channel using the Channel List menu options. Option

menu items may differ depending on the channel status.

■

Add / Delete: Delete or add a channel to display the channels

you want.

✎ All deleted channels will be shown on the All Channels

menu.

✎ A gray-Coloured channel indicates the channel has been

deleted.

✎ The Add menu only appears for deleted channels.

✎ Delete a channel from the Added Channels or Favourites

menu in the same manner.

■

Add to Favourite / Delete from Favourite

t

: Set

channels you watch frequently as Favourites.

■

Timer Viewing: You can set a desired channel to be displayed

automatically at the set time; even when you are watching

another channel. Set the current time first to use this function.

■

Edit Channel Name: Assign your own channel name.

■

Sort: This operation allows you to change the programme

numbers of the stored channels. This operation may be

necessary after using the auto store.

■

Lock / Unlock: Lock a channel so that the channel cannot be

selected and viewed.

✎ This function is available only when the Child Lock is set

to On.

✎ The PIN input screen appears. Enter your 4-digit PIN, the

default of which is “0-0-0-0”. Change the PIN using the

Change PIN option.

■

Select All / Deselect All: You can select or deselect all channels

in the channel list.

■

Auto Store: Scans for a channel automatically and stores in the

TV.

Channel Mode

Channels will be switched within the favourite or memorised

channel list.

■

Added Channels: Shows all added channels.

■

Favourite Ch.: Shows all favourite channels.

Fine Tune

If the reception is clear, you do not have to fine tune the channel, as

this is done automatically during the search and store operation. If

the signal is weak or distorted, fine tune the channel manually.

✎ Fine tuned channels that have been saved are marked with an

asterisk “*” on the right-hand side of the channel number in

the channel banner.

✎ To reset the fine-tuning, select Reset.

Alternately select Teletext ON, Double, Mix or OFF.

Returns to the previous channel.

Press to directly access to channels.

Turns the TV on and off.

Displays and selects the available video

sources.

Use these buttons in a specific feature.

P.MODE: Selects the picture mode.

P.SIZE: Selects the picture size.

SRS.: Turns the SRS TruSurround on and off.

Cuts off the sound temporarily.

Selects the HDMI mode directly.

Displays the main on-screen menu.

Displays information on the TV screen.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

values seen on the menu.

Exits the menu.

Returns to the previous menu.

Use these buttons according to the

direction on screen.

Changes channels.

Displays channel lists on the screen.

Views the Media Play.

Adjusts the volume.

A B C D

P.MODE P.SIZE

SRS

MEDIA.P

HDMI

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care Centre.

Country

Customer Care Centre

Web Site

AUSTRALIA 1300 362 603 www.samsung.com

NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com

CHINA 400-810-5858 www.samsung.com

HONG KONG (852) 3698-4698

www.samsung.com/

hk

www.samsung.com/

hk_en/

INDIA

1800 1100 11

3030 8282

1800 3000 8282

1800 266 8282

www.samsung.com

INDONESIA

0800-112-8888

021-5699-7777

www.samsung.com

JAPAN 0120-327-527 www.samsung.com

MALAYSIA 1800-88-9999 www.samsung.com

PHILIPPINES

1-800-10-SAMSUNG(726-7864) for

PLDT

1-800-3-SAMSUNG(726-7864) for

Digitel

1-800-8-SAMSUNG(726-7864) for

Globe

02-5805777

www.samsung.com

SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com

THAILAND

1800-29-3232

02-689-3232

www.samsung.com

TAIWAN

0800-329-999

0266-026-066

www.samsung.com

VIETNAM 1 800 588 889 www.samsung.com

Changing the Input Source

Source List

Use to select TV or other external input sources such as DVD / Blu-

ray players / cable box / STB satellite receiver connected to the TV.

1. Press the SOURCE button.

2. Select a desired external input source.

■

TV / AV / Component / HDMI1/DVI / HDMI2

✎ You can only choose external devices that are connected to the

TV. In the Source List, connected inputs will be highlighted.

How to use Edit Name

Edit Name lets you associate a device name to an input source. To

access Edit Name, press the TOOLS button in Source List. The

following selections appear under Edit Name:

■

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV

Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV

/ Blu-ray / HD DVD / DMA: Name the device connected to the

input jacks to make your input source selection easier.

✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI

cable, you should set the TV to PC mode under Edit Name.

✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI

to DVI cable, you should set the TV to DVI PC mode under Edit

Name.

✎ When connecting an AV devices to the HDMI IN 1(DVI) port

with HDMI to DVI cable, you should set the TV to DVI mode

under Edit Name.

Information

You can see detailed information about the selected external device.

✎ Information only available for the current connected source.

AUDIO OUT

R-AUDIO-L

VIDEO OUT

W R BR

R W R B RG

RG

ANT OUT

W YR

R W RY

AUDIO OUT

R-AUDIO-L

COMPONENT OUT

PR PB Y

OPTICAL

HDMI OUT

HDMI OUT

DVI OUT

VCR

Blu-ray player

Cable

or

Power Input

VHF/UHF Antenna

Audio Device

Using an Optical (Digital)

Cable

AV Device (2)

Using an Audio/Video

AV Device (3)

Using a Component

Cable (up to 1080p)

Media Play

Using a USB Drive

PC

Using a HDMI (to DVI) Cable

Digital Audio System

Blu-ray player / DVD / cable box / set top box

AV Device (1)

Using a HDMI Cable (up to 1080p)

Connections

y For better picture and audio quality, connect to a digital device using an HDMI cable.

y The picture may not display normally (if at all) or the audio may not work if an external

device that uses an older version of HDMI mode is connected to the TV. If such a problem

occurs, ask the manufacturer of the external device about the HDMI version and, if out of

date, request an upgrade.

y Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a

connection error may occur.

y PC(D-Sub) and PC/DVI AUDIO IN input are not supported.

y For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) port.

y Connecting through the HDMI cable may not be supported depending on the PC.

y If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

y Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may

cause the TV to malfunction.

y Service: Connector for service only.

Display Modes (HDMI Input)

Optimal resolution is 1920 X 1080 @ 60Hz.

Mode Resolution

Horizontal

Frequency

(KHz)

Vertical

Frequency

(Hz)

Pixel Clock

Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 720 45.000 60.000 74.250 +/+

1280 x 800 49.702 59.810 83.500 -/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1366 x 768 47.712 59.790 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1600 x 900RB 60.000 60.000 108.000 +/+

1680 x 1050 65.290 59.954 146.250 -/+

1920 x 1080 67.500 60.000 148.500 +/+

Installing batteries (Battery size: AAA)

✎ NOTE

x Use the remote control within 23 feet from TV.

x Bright light may affect the performance of the remote control.

Avoid using nearby special fluorescent light or neon signs.

x The Colour and shape may vary depending on the model.

BN68-04006A

BN68-04006A-01

[PE450_530-ASIA-Ready]ENG.indd 1 2012-02-27 �� 3:24:27

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Samsung PS51E530A3R Plasma Television. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Samsung. They might be able to provide an original manual. Are you looking for the manual of your Samsung PS51E530A3R Plasma Television in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Samsung Plasma Televisions
More manuals of Plasma Televisions

Frequently Asked Questions about Samsung PS51E530A3R Plasma Television

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Samsung PS64F5000AK Plasma Television

Manual

Samsung PS63B680T5M Plasma Television

Manual

Samsung PS-42Q92HP/HAC Plasma Television

Manual

Samsung PS59D7000DS Plasma Television

Manual

Samsung PS42A450P1D Plasma Television

Manual

Samsung PS50A410C1D Plasma Television

Manual

Samsung PS51E550D1P Plasma Television

Manual

Samsung PS43F4500AK Plasma Television

Related categories