Home > Do-It-Yourself > Soldering Guns > Ryobi Soldering Guns > Ryobi RSI18-0 Soldering Gun

Manual Ryobi RSI18-0 Soldering Gun

Need a manual for your Ryobi RSI18-0 Soldering Gun? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Safety, performance, and dependability have been given top

priority in the design of your soldering iron.

INTENDED USE

The soldering iron is intended only for soldering circuits,

electrical connections, jewellery, stained glass, and other

crafts.

Do not use the product for any other purposes. The use

of the product for operations diﬀ erent from intended could

result in a hazardous situation.

SOLDERING IRON SAFETY WARNINGS

■ This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

■ The product is intended for household use only.

■ The soldering pen must be placed on its stand when not

in use.

■ Do not lay a hot soldering iron on its side.

■ Do not touch the heated tip of the soldering iron.

■ Always assume that the soldering iron tip is hot.

■ Use the soldering iron in a well-ventilated area to avoid

breathing fumes.

■ Do not point the tip of the soldering iron at another

person.

■ Do not place your hands or fingers near the tip of the

soldering iron.

■ Never leave the product unattended while it is in the on

position.

■ Always remove the battery pack and allow the soldering

tip to cool for a minimum of 30 minutes before removing

the tip. Touching a hot soldering tip can result in serious

personal injury.

■ Always remove the battery pack and allow the product

to cool before leaving, transporting or storing. Storing a

soldering iron with a hot tip can cause serious burns and/

or ignite combustible objects.

■ Remove the battery pack from the product before making

any adjustments, changing accessories, or storing the

product. Such preventive safety measures reduce the

risk of starting the product accidentally.

■ Do not allow children to use the soldering iron. It is not

a toy.

■ Do not solder live circuits.

■ Do not disassemble the product.

■ The soldering iron tip is sharp. Do not touch the tip

or allow it to come in contact with anything other than

soldering wire and the workpiece material.

ADDITIONAL BATTERY SAFETY WARNINGS

■ To reduce the risk of fire, personal injury, and product

damage due to a short circuit, never immerse your

tool, battery pack or charger in fluid or allow a fluid to

flow inside them. Corrosive or conductive fluids, such

as seawater, certain industrial chemicals, and bleach

or bleach-containing products, etc., can cause a short

circuit.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps or

tape. Do not transport batteries that are cracked or leaking.

Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

See page 54.

1. Pen holder

2. Soldering tip

3. Soldering pen

4. Temperature control knob

5. LED indicator

6. On/off switch

7. Battery port

8. Soldering tip

9. Soldering reel

10. Operator’s manual

11. Battery pack

12. Charger

LED INDICATOR

Flashing (quickly) Tip heating up

Solid

Tip reached working

temperature

Flashing (slowly) Tip cooling

MAINTENANCE

■ Use only original accessories and spare parts. Should

components need to be replaced which have not been

described, please contact an authorised service centre.

All repairs should be performed by an authorised service

centre.

■ Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to various types of commercial

solvents and may be damaged by their use. Use clean

cloths to remove dirt, carbon dust, etc.

■ Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which may result in serious personal

injury.

SYMBOLS ON THE PRODUCT

V Volts

Direct current

European Conformity Mark

British Conformity Mark

Original Instructions

ENGLISH

Rating

Let us know what you think about the Ryobi RSI18-0 Soldering Gun by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Ryobi RSI18-0 Soldering Gun?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Ryobi RSI18-0 Soldering Gun. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Ryobi RSI18-0 Soldering Gun. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ryobi. They might be able to provide an original manual. Are you looking for the manual of your Ryobi RSI18-0 Soldering Gun in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Ryobi
Model	RSI18-0
Category	Soldering Guns
File type	PDF
File size	2.19 MB

All manuals for Ryobi Soldering Guns
More manuals of Soldering Guns

Frequently Asked Questions about Ryobi RSI18-0 Soldering Gun

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (3) Read more