Manual Royal Sovereign CL-923 Laminator
Need a manual for your Royal Sovereign CL-923 Laminator? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
3.
Place the document to be laminated on the adhesive side of the cold film with the document face down, sealed end first.
4. Insert the document to be laminated into the front opening of the machine.
5. Remove paper liner from the cold film slowly while the document is being inserted into the machine.
Important Note:
Ensure the laminator is turned OFF after use and disconnected from the electrical outlet.
TROUBLESHOOTING
Symptom Solution
Motor does not work.
Check to make sure machine is plugged in. Check to make sure the
power button is turned on.
The pouch is jammed.
Please slide the ABS (anti-blockage system) and pull out the pouch
from the front of the machine
SPECIFICATIONS
CL-923 /CL-1223
LAMINATOR
Owner's Manual
Royal Sovereign International, Inc.
SAFETY INSTRUCTIONS
The safety recommendations outlined in this section should be read and understood before operating this machine.
When using this machine follow these basic safety precautions to reduce risk of fire, electric shock or injury. Keep this
information for future reference.
1. To prevent the possibility of a fire or injury, do not allow foreign articles inside the machine.
2. Do not attempt to laminate items that exceed total recommended material thickness.
3. Do not insert pouch film with the back end first. (Front of film: sealed side, Back of film: open side.) This may
cause the pouch to jam the rollers.
4. To prevent the possibility of electric shock, do not immerse the laminator in water or permit liquids inside the machine.
5. Because the laminator creates heat, keep out of the reach of children.
6. Do not cut pouches before inserting them into the laminator. This will cause the laminator to jam.
7. Do not laminate leaves, flowers, clothes etc.
8. If the room temperature is low (under 64°F/18°C), the ready light may take longer to come on.
9. When unplugging the power plug, grip the plug to pull it out. Pulling the cord may result in electric shock, fire, or
damage to the machine.
10. Do not use the machine if the cord is damaged. This may result in electric shock, fire, or other hazards.
11. Do not place objects on the power cord and do not bend it excessively. This may result in electric shock, fire or
other hazards.
12. When not using the machine for long periods of time, unplug the power cord from the outlet.
13. The machine should be installed near an outlet that is easily accessible.
How to load a laminating pouch.
The laminating pouch is sealed along one side. Open the pouch and place the item to be laminated centrally and as close
to the sealed edge as possible. The sealed edge is then placed into the entry slot to start the laminating process.
Jam Release Button
Should the pouch become jammed during the laminating process turn the machine off and press and hold the 'jam
release' button and remove the item.
CONTROLS
OPERATION
Hot Lamination
1. Place the machine on a flat, sturdy surface and Set the Laminator to 'Hot'. Press the power button 'ON'
2. For hot laminating, the machine will take approximately 3-5 minutes to warm- up, select hot setting, hot
laminating can begin when the Green "Ready" light turns on.
3. Place the item to be laminated into the laminating pouch.
4. Insert the pouch film into the front opening of the laminator. Make sure to place the sealed end of the pouch
film in first.
5. The document or photo will then automatically feed out the through the back of the machine.
NOTE: Laminated items exiting the machine may be too hot to touch
6. If the item is not completely laminated, repeat steps 4-5.
NOTE:
Laminated items will be hot and will easily bend. To keep the item flat, place on a flat surface and allow to cool.
Cold Lamination
1. Place the machine on a flat, sturdy surface. Set the Laminator to 'Cold'. Press the power button 'ON'.
2. The green ready light will turn on. You can begin to laminate the item. (Please note: You will need to use self-
adhesive cold laminating pouch film). If the machine was previously used in hot setting, allow approximately 25
minutes for the machine to cool down
LIMITED ONE YEAR WARRANTY
This warranty applies to repair or replacement of product found to be defective in material or workmanship for one
year from the date of the original purchase. This warranty is extended only to the original purchaser.
This warranty does not apply to damage resulting from abuse, misuse, or improper maintenance of damage that is
attributable to acts of nature. Royal Sovereign International, Inc. (and its affiliated companies) is not liable for
incidental or consequential damages of any nature. This limitation would not apply if you live in those areas that do
not permit the exclusion or limitation of incidental or consequential damages.
Defective products for warranty repair or replacement cannot be returned without a Return Authorization number.
Please go to www.royalsovereign.com USA-Customer Support Tab to make a request for an Office Product Return
Authorization.
Defective products must be returned to Royal Sovereign International Consumer Return Department, freight prepaid,
with proof of purchase and Return Shipping and Handling payment (check or money order). Upon repair or
replacement the product will be returned to the customer.
Return defective product to the following address with a detailed description of the problem. If possible, pack in
original carton.Please prepay shipping charges.
For out of warranty service or frequently asked questions please go to www.royalsovereign.com USA- Customer
Support Tab.
For sales of product, parts or accessories please visit us at www.royalfulfillmentcorp.com.
For service or sales please contact your local Royal Sovereign Office:
Please read and retain these instructions
Because our products are subject to continuous improvement, Royal Sovereign reserves the right to modify product design
and specifications without notice and without incurring any obligation. E&OE
Ready indicator (Green)
Power Light (Red)
Feed in
Feed out
Anti Blockage System button
Hot/Cold Setting
ON / OFF Switch
Important: sealed laminate
end must go infirst
Before laminating important or unique documents,
always test a pouch through the laminator using a similar document.
Model Name CL-923 CL-1223
Power Supply Voltage 120V 60Hz / 220-240V 50Hz
Power Consumption (W)
265W 365W
# of Rollers
2
Min pouch size
Credit card size - “2.1 x 3.3” (54 x 86mm)
Speed 9.8” (250mm)
Maximum Entry Width
9" (230mm) 13" (330mm)
Warm-up Time (Min) 3-5 mins
Lamination Hot and Cold
Unit Dimensions
(W x D x H)
13.8” x 5.7” x 2.9”
(350 x 145 x 74 mm)
17.4” x 5.7” 2.9”
(443 x 145 x 74mm)
Unit Weight 2.5 lbs (1.15kg) 3.6 lbs (1.63kg)
ROYAL SOVEREIGN INTERNATIONAL, INC.
2 Volvo Drive Rockleigh, NJ 07647 USA
TEL : +1) 800-397-1025
FAX : +1) 201-750-1022
www.royalsovereign.com
RS INTERNATIONAL CANADA INC.
191 Superior Blvd., Mississauga Ontario L5T 2L6 CANADA
TEL: +1) 905-461-1095 TF: +1) 866 961-6673
FAX: +1) 905-461-1096
www.royalsovereign.ca
Loading…
Rating
Let us know what you think about the Royal Sovereign CL-923 Laminator by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your Royal Sovereign CL-923 Laminator. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Royal Sovereign. They might be able to provide an original manual. Are you looking for the manual of your Royal Sovereign CL-923 Laminator in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | Royal Sovereign |
| Model | CL-923 |
| Category | Laminators |
| File type | |
| File size | 0.4 MB |
All manuals for Royal Sovereign Laminators
More manuals of Laminators
Join the conversation about this product
Here you can share what you think about the Royal Sovereign CL-923 Laminator. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.