Home > Audio, TV & Photo > Amplifiers > Rotel Amplifiers > Rotel C8 Amplifier

Manual Rotel C8 Amplifier

Need a manual for your Rotel C8 Amplifier? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

C8 / C8+ Eight Channel Power Ampliers

Notice

The RS232 connection should be handled by authorized persons only.

WARNING: There are no user serviceable parts inside. Refer all servicing

to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose

the unit to moisture or water. Do not expose the unit to dripping or

splashing. Do not place objects filled with liquids, such as vases, on

the unit. Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the enclosure,

immediately disconnect the power cord from the wall. Take the unit to a

qualified service person for inspection and necessary repairs.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat. Do

not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power supply

cord or plug is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

The apparatus should be used in non tropical climate.

Rotel products are designed to comply with international

directives on the Restriction of Hazardous Substances

(RoHS) in electrical and electronic equipment and the

disposal of Waste Electrical and Electronic Equipment

(WEEE). The crossed wheelie bin symbol indicates

compliance and that the products must be appropriately

recycled or processed in accordance with these directives.

Important Safety Instructions

You must allow a minimum 50 cm or 20 inches of unobstructed

clearance around the back of the unit.

> 50 cm

> 20 in

WARNING:

The rear panel power cord connector is the mains power

disconnect device. The device must be located in an open area that

allows access to the cord connector.

The unit must be connected to a power supply only of the type and

voltage specified on the side panel. (USA: 120 V/60Hz, EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied power

supply cable or an exact equivalent. Do not modify the supplied cable.

Do not use extension cords.

The main plug is the disconnect of the unit. In order to completely

disconnect the unit from the supply mains, remove the main plug from

the unit and the AC power outlet. This is the only way to completely

remove mains power from the unit.

Use Class 2 wiring for speaker connections to ensure proper installation

and minimize the risk of electrical shock.

Rating

Let us know what you think about the Rotel C8 Amplifier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Rotel C8 Amplifier?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Rotel C8 Amplifier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Rotel C8 Amplifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Rotel. They might be able to provide an original manual. Are you looking for the manual of your Rotel C8 Amplifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Rotel
Model	C8
Category	Amplifiers
File type	PDF
File size	1.54 MB

All manuals for Rotel Amplifiers
More manuals of Amplifiers

Frequently Asked Questions about Rotel C8 Amplifier

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Wat is the difference betwee an amplifier and a pre-amplifier? Verified

An amplifier is often an integrated amplifier, with pre-amplifier and power amplifier in one device. A pre-amplifier regulates volume and sometimes balance and tone and lets you choose what source is used (cd, tape, turntable, etc). A pre-amplifier often provides a little amplification, just enough for the power amplifier. This is an active pre-amplifier. Sometimes a pre-amplifier does not amplify, making it a passive pre-amplifier.

This was helpful (40) Read more