Home > Personal care > Shavers > Remington Shavers > Remington R9370 MicroFlex Ultra Shaver

Manual Remington R9370 MicroFlex Ultra Shaver

Need a manual for your Remington R9370 MicroFlex Ultra Shaver? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Cleaning your shaver:

TO ASSURE OPTIMAL PERFORMANCE,IT IS RECOM-

MENDED T H AT YOU CLEAN YOUR SHAVER AFTER EACH

USE.The cutting system of this shaver was designed t o

be cleaned by rinsing under warm running water or by

b r u s h i n g .

Cleaning your Remington

shaver is easy. (NOTE: With the

R-9370 model,the brush icon will blink to remind you to clean

your shaver.)

■ Open the hairpocket by squeezing

on both buttons and rotating away

from the body of the shaver. You

may blow out the stubble thor-

oughly, or rinse the shaver head in

water. Rinse both sides of the

head assembly.

■ At Least Once a Week:

For more complete cleaning, remove the cutter retainer

a s s e m b ly from the hairpocket by turn-

ing the center knob ap p r o x i m at e l y 1/4

turn counter clockwise. Hold cutter

retainer assembly as shown, a n d

remove head by turning ap p r o x i m at e ly

1/8 turn in the direction shown. B r u s h

clean both the head and the cutter.

Reassemble head to cutter retainer assembly by align-

ing and turning head 1/8

turn in the opposite direc-

t i o n .R e p e at this process

for each of the 3 heads.

Clean each head and cutter

set one at a time to prevent

mixing cutter components.

(These should be kept as

s e t s ) . After cleaning, p l a c e

cutter retainer assembly in

the hairpocket, and secure by turning center knob

ap p r o x i m at e ly 1/4 turn clockwise.

Caution: Never put the shaver completely under water.

Do not use any aggressive cleansing agent as this may destroy the

shaver coatings.

■ To clean and lubricate your shaver’s cutters and head assembly,

apply Remington

Shaver Saver

(SP-4) Lubricant.The lubricant

helps remove hair clippings while reducing wear.A quick spray

after each shave keeps your shaver operating at peak perform-

ance.

Caution: Do not remove or replace the head assembly while

shaver is running or plugged into an electrical outlet as it may

cause damage to the unit’s cutters.

■ Worn or damaged parts should be replaced with Remington

replacement parts only.

When is it time to replace your heads

and cutters?

It is very important to replace your heads and cutters

when necessary to insure a close,comfortable shave

without irritation. We recommend they be replaced

every 12 months.Here are some signs of head and

cutter wear, indicating that replacement is needed.

(NOTE:R-9370 cutter icon,R-9270- the yellow LED-

will blink when it is time to replace the cutters.)

Irritation

As the heads get excessively worn there may be some

skin irritation.This would be especially noticed when

applying After Shave lotion.

Pulling

When the cutters wear you may feel a sense of pulling

and a loss of closeness when you shave.This is an in

cation that it is time to replace your heads and cutters.

The replacement part for this shaver is model #SP-18 or SP-21.

U.S.residents: To order, contact us at 800-736-4648,visit us at

www.remington-products.com or visit your local retailer.

Canadian residents:For any shaver accessory requirements,

please call (800) 268-6531 or write:Remington Products

(Canada) Inc., P.O.Box 601,Postal Station “T,”Dept.A-100,

3019 Dufferin St., Toronto,Ontario,Canada M6B3T7.

H a i r p o c k e t

Head

Cutter

Rating

Let us know what you think about the Remington R9370 MicroFlex Ultra Shaver by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Remington R9370 MicroFlex Ultra Shaver?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Remington R9370 MicroFlex Ultra Shaver. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Remington R9370 MicroFlex Ultra Shaver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Remington. They might be able to provide an original manual. Are you looking for the manual of your Remington R9370 MicroFlex Ultra Shaver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Remington
Model	R9370 MicroFlex Ultra
Category	Shavers
File type	PDF
File size	0.33 MB

All manuals for Remington Shavers
More manuals of Shavers

Frequently Asked Questions about Remington R9370 MicroFlex Ultra Shaver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

In what direction should I shave? Verified

In most cases it is recommended to shave with the direction of hair growth. This reduces the risk of irritated skin and ingrown hair.

This was helpful (184) Read more

What is the difference between vibrating and rotating shaver heads? Verified

This is mostly a matter of personal needs and preference, but in general it can be said that the blades in vibrating shaver heads move faster and therefor offer quicker results. A rotating shaver head can reach certain areas of the face more easily.

This was helpful (165) Read more