Home > Currys Essentials CDW60W18 Dishwasher > We have owned our CDW60D18 for a total of 13 months. Stopped working, P" & P3 buttons flashing simul...

Question: We have owned our CDW60D18 for a total of 13 months. Stopped working, P" & P3 buttons flashing simultaneously. Can't find the problem. It fills & Flushes without problem, so no blockages thanks, has full electrical power. Probably the main programme circuit board. it's destined for the tip. Waste of money. Buy better quality as this is a false economy.

This was helpful (0) | Asked for Currys Essentials CDW60W18 Dishwasher

John Richardson 27-01-2021
Sounds like exactly the problem I had with my one of the same model. My also filled, and claimed to be not filling. There was some gunk in the water inlet filter - the filter people tend to forget and which can only be accessed from the outside and back of the machine. If you unscrew the water inlet pipe, you can pull it out with a gentle tug from a pair of pliers. I cleaned mine out, and although it was a bit temperamental for a while even after that, it's settled down and worked consistently..

This was helpful (1)

John Richardson 27-01-2021
2/2 ...since then. It did take a few cycles, including a couple of hot washes with Dishwasher cleaner (which I don't normally use but it may have helped). P6 - the most intense programme, worked first, then the others. P1 (rinse only) always worked. Hope that helps. John.

This was helpful (1)

Write an answer to this question

Name *

Message *

Image png/jpg/jpeg - Max 8 MB

Receive notifications

Submit