Home > IKEA NEIDEN Bed Frame > According to the instructions, the middle beam should rest on 2 screws and attached to one of the tw...

Question: According to the instructions, the middle beam should rest on 2 screws and attached to one of the two boards. However. The holes are prepared so that one screw is in one board and the other in the other, leaving a distance. In addition, the naninstructions first need to insert metal inserts into the beam, then it turns out that when I go too deep, it is impossible to insert the nut or remove it. Please reply

This was helpful (2) | Asked for IKEA NEIDEN Bed Frame

Piotr Kowalski 10-08-2020
These are exactly pages 10 and 11 in the manual. The beam is 2-layer and in the drawing it looks as if the holes were prepared in one of them, and there are two of them, which creates a gap between the outside of the beam and the middle beam.

This was helpful (3) (Translated by Google)

Write an answer to this question

Name *

Message *

Image png/jpg/jpeg - Max 8 MB

Receive notifications

Submit