Home > Garden & Terrace > Chainsaws > Qualcast Chainsaws > Qualcast PCS46Z Chainsaw

Manual Qualcast PCS46Z Chainsaw

Name: Qualcast PCS46Z Chainsaw
Brand: Qualcast
SKU: PCS46Z
Rating: 100 (1 reviews)

Need a manual for your Qualcast PCS46Z Chainsaw? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

1312

Customer Helpline 01904 727500

www.gardenservicecentre.co.uk

Customer Helpline 01904 727500

www.gardenservicecentre.co.uk

FUEL MIXTURE: 1 Litre (1000 ml) petrol: 25cc (25 ml) 2 Stroke engine oil (40:1 ratio)

Using a funnel and keeping the bottle level, pour the fuel in the left hand side (‘A’) up to the required

level eg 2.5 or 5 then ll the right hand side (‘B’) up to the same corresponding mark with oil. Shake

vigorously to mix the two products prior to pouring into the tank (C).

NOTE! Use 5 for 500ml fuel mixture and 2.5 for 250ml fuel mixture.

FILLING THE LUBRICATION

Whenever you rell the fuel tank with petrol you must also top up the level of chain oil in the chain

oil reservoir (D).

Use special chainsaw oil to lubricate the saw chain.

NOTE! Most stores will sell acceptable oil under the name “Chainsaw chain oil”.

FILLING FULE TANK

Clean surface around the fuel cap to prevent contamination. Loosen fuel cap slowly. Rest the cap

on a clean surface. Carefully pour fuel into the tank. Avoid spillage. Prior to replacing the fuel cap,

clean and inspect the seal located inside the fuel cap . Immediately replace fuel cap and hand

tighten. Wipe up any fuel spillage.

NOTE! It is normal for smoke to be emitted from a new engine after rst use.

Important! The fuel mix is added into fuel tank(C), chain lubrication oil is lled into oil reservoir(D).

Seal one cap prior to removing the second cap. If you put the uid into the wrong tank call the

customer helpline immediately at 01904 727500.

Preparing to Operate the Chainsaw

Step 3 - Filling with Engine Fuel and lubrication

This product is powered by a 2-Stroke engine and requires pre-mixing of petrol and 2-stroke oil.

Use a high quality 2-Stroke engine oil according JASO FC classic. Do not use automotive oil or

2-stroke outboard oil. DO NOT mix quantities larger than usable in a 30 day period.

Preparing to Operate the Chainsaw

Step 2 - Adjust the chain tension

1a Pull the chain cover lever out, and slightly loosen the chain cover.

1b Take off the blade protector. While holding up the tip of the bar, adjust the chain tension by

turning the tensioner screw until the chain engages in the bar channel.

1c While lifting tip of guide bar, tighten bar knob securely (clockwise). Hand tighten only!

NOTE! when tensioned correctly it should be possible to pull one full chain link free of the bar

channel with ease.

- A new chain will expand its length during the rst period of use. Check and re-adjust the tension

frequently as a loose chain can easily derail or cause rapid wear of itself and the chain bar.

CAUTION! If the saw chain is TOO LOOSE or TOO TIGHT the V-drive wheel, chain bar, chain

and crank shaft bearing will suffer premature wear. Above g. shows the correct tension A (when

cold) and tension B (when warm). FIG C shows a chain that is too loose.

2 Tighten the chain cover.

40:1

Use

matching

numbers

chain tension screw chain cover lever

loose

tight

loose

tight

Rating

Let us know what you think about the Qualcast PCS46Z Chainsaw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Qualcast PCS46Z Chainsaw?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Qualcast PCS46Z Chainsaw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Qualcast PCS46Z Chainsaw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Qualcast. They might be able to provide an original manual. Are you looking for the manual of your Qualcast PCS46Z Chainsaw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Qualcast
Model	PCS46Z
Category	Chainsaws
File type	PDF
File size	2.97 MB

All manuals for Qualcast Chainsaws
More manuals of Chainsaws

Frequently Asked Questions about Qualcast PCS46Z Chainsaw

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the right tension for the chain on my chainsaw? Verified

When pulling up the chains by hand it should be able to lift up to just above or under the guide bar.

This was helpful (810) Read more

Do I need to wear hearing protection when using a chainsaw? Verified

Yes you should. Although the amount of noise produced by a chainsaw can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (112) Read more

Do I need to wear eye protection when using a chainsaw? Verified

Yes. Small particles can fly up during sawing. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.

This was helpful (111) Read more