Home > Household appliances > Heaters > Qlima Heaters > Qlima SRE9046C Heater

Manual Qlima SRE9046C Heater

Name: Qlima SRE9046C Heater
Brand: Qlima
SKU: SRE9046C
Rating: 30 (46 reviews)

Need a manual for your Qlima SRE9046C Heater? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 182 comments and has 46 votes with an average product rating of 30/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SRE5035C - SRE7037C - SRE9046C

SLO

FIN

MANUEL D’UTILISATION

GEBRAUCHSANWEISUNG

BRUGSANVISNING

INSTRUCCIONES DE USO

KÄYTTÖOHJE

OPERATING MANUAL

ISTRUZIONI D’USO

BRUKSANVISNING

GEBRUIKSAANWIJZING

MANUAL DE INSTRUÇÕES

INSTRUKCJI OBSŁUGI

BRUKSANVISNING

NAVODILA ZA UPORABO

100

112

124

136

148

Download manual in English (PDF, 2.04 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Qlima SRE9046C Heater by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Qlima SRE9046C Heater?
Yes No

30%

70%

46 votes

Join the conversation about this product

Here you can share what you think about the Qlima SRE9046C Heater. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Jakob Stougaard 30-11-2021
I get the error e13 constantly, it goes out after a maximum of 20 SEK. Anything I can do?

reply | This was helpful (375) Read more (Translated by Google)

Peter Frisk 03-09-2022
Error E13 what do I do?

This was helpful (357) (Translated by Google)

Peer Tørnqvist 07-12-2022
What is the answer to if it reports E 13??

This was helpful (119) (Translated by Google)

Per Hansen 02-02-2023
Error E 13 How do I fix this.

This was helpful (103) (Translated by Google)

Erik Bjerring Kristensen 21-04-2023
Errors E03 and E13. What is the error?

This was helpful (102) (Translated by Google)

Dyveke 15-04-2023
Hi, what am I doing? Keeps getting F13 after a few min

This was helpful (53) (Translated by Google)

Per Hansen 18-02-2023
Getting no response to error E 13 Now I put up a post on Facebook and warn about the purchase of clima petroleum stoves

This was helpful (29) (Translated by Google)

Lars Thomsen 21-03-2023
Får også den fejl med E13 også på vores tresse udendørs så hvordan fikser man den

This was helpful (26)

Susanne Brandt 06-04-2021
I have the same problem with mine, it also stops all the time. and reports E17 it is in the awning of the Caravan. I mean there is not too close that it should not stop.

reply | This was helpful (287) Read more (Translated by Google)

Klaus hartz 20-02-2023
Help also has error e17, is there someone who can send pictures of how to make a louse [email protected]

This was helpful (94) (Translated by Google)

Britt Nielsen 26-12-2023
I have the same problem with the oven type E17, how do I fix the lice you are talking about,

This was helpful (21) (Translated by Google)

Peter Lustig 21-05-2023
Hello everybody. E17 is the Co2 detector that is controlled here. In the awning, the oxygen in the large stove is quickly used up, so it goes out. I tested it yesterday and placed the device in front of the entrance so that it draws oxygen from outside for combustion. Then he wouldn't go out. So it's safety related.

This was helpful (12) (Translated by Google)

Erling Bilstrup 06-05-2021
I have a 4kw that turns off and writes E17 I would like to see how to make such a louse as is talked about below.

reply | This was helpful (122) Read more (Translated by Google)

Lasse Nielse 17-04-2022
Want to know how to make lice so our qlima 9046 does not write e 17 all the time and we do not have to sit in draft.

This was helpful (83) (Translated by Google)

Arne Larsen 17-10-2023
My oven reports an E 17 error. What do I do to remedy this?

This was helpful (41) (Translated by Google)

Jimmy Andersen. 03-03-2022
How the ratchet lice

This was helpful (23) (Translated by Google)

Kisser 24-03-2024
It says E17, what can I do?

This was helpful (9) (Translated by Google)

Lars jensen 31-03-2021
I bought a 4 kw qlima oven. I use it in the condenser on my caravan, but it goes out all the time and it writes E 17 and it is increased CO2 concentration. It does so from day one and it barely manages to heat up condensed before it goes out. I also have a 3 Kw and it does not work Are there others who have also experienced it or is there a fault on the stove.

reply | This was helpful (78) Read more (Translated by Google)

Henrik Steen Hansen 06-04-2021
The problem is well known..it is a slightly too eager CO2 sensor..it can be "lured" so it is put out of action .... try calling QLIMA in Denmark ... they are willing to help .... if you are a good handyman you can fix it yourself ... write to me here so you can get pictures of my "lice"

This was helpful (208) (Translated by Google)

Henrik Sten Hansen 27-03-2022
Hi Henrik. Can you send me pictures of your co2 sensor lice because I have the same problem. Regards Tommy mail: ([email protected])

This was helpful (61) (Translated by Google)

Michael 16-12-2021
Hi Henrik I have the same problem how to make that lice? Michael

This was helpful (59) (Translated by Google)

Thomas 08-10-2022
Hi Henrik or anyone else for that matter. I would really like a picture of the bug you can make to avoid error E17 all the time. [email protected] Pft Thomas

This was helpful (29) (Translated by Google)

Michael Berentsen 03-04-2021
Have the same problem and have a a smaller standing at the other end of the tent they are running fine

This was helpful (18) (Translated by Google)

Til Henrik Steen Hansen 09-10-2022
Hello Henrik Steen Hansen We have the same problem, would you send pictures of how to fix it to [email protected]? Thanks in advance MVH Charlotte & Erik Nielsen

This was helpful (18) (Translated by Google)

Hej Henrik hansen 24-03-2024
I want to know if you will send me how to "flush" co2 [email protected]

This was helpful (2) (Translated by Google)

Jane Jørgensen 12-11-2021
Our qlima is in our awning - it constantly reports e17, but it can not fit that CO2 is too high - what should I do?

reply | This was helpful (46) Read more (Translated by Google)

kim nørgreen 22-03-2023
help for lus e17 image

This was helpful (27) (Translated by Google)

Kurt løvstrup Nielsen 24-11-2022
Hi, can you send a photo vårdan you make a lice on my oven and can you make it on my oven do you have a photo you can send to me thanks Kurt my email here [email protected] thanks for Kurt Vår dan you make a lice on my above photo please

This was helpful (19) (Translated by Google)

René Gjervig 10-01-2022
My qlima Sre 1330 TC-2 shows code E03 has cleaned the filter and sucked fuel out of the stove and emptied the tank there is more I can do

reply | This was helpful (44) Read more (Translated by Google)

Ole Bruun 11-02-2023
What should I do with error code e03 on my qlima oven

This was helpful (26) (Translated by Google)

Mette Rasmussen 04-01-2022
I would really like a picture of how to put a “lice” on the Qlima oven. Our oven goes out all the time and reports error E17.

reply | This was helpful (31) (Translated by Google)

Ole Johansen 26-11-2021
It's not that hard to lice Sin oven

reply | This was helpful (24) Read more (Translated by Google)

Christian Pedersen. 15-11-2022
hello Ole Can I get you to explain how to lice such an oven? Maybe a picture too? Many thanks.

This was helpful (26) (Translated by Google)

Hej Ole Johansen 10-04-2022
I have the same problem as everyone else with E17 I do not know how to turn off that lice and is there anyone who can help me it is I hope as ours is brand new and big also in a big tent greetings Jette Rasmussen I welcome pictures so I can see where it sits on that little lice

This was helpful (24) (Translated by Google)

Henrik Steen Hansen 25-10-2021
Hi can you help with the lice you have made for is by and be tired of the error comes 5 minutes after I have turned it on and it is an error E17 Regards Tom Lund

reply | This was helpful (23) Read more (Translated by Google)

Henrik Steen hansen 07-11-2021
Have an oven with the same problem shows E17. Do you have a picture of what you have made of yours. Vh Susanne

This was helpful (29) (Translated by Google)

Nick 17-12-2022
Hi, my oil heater shows error E13, can I ask for your help? Sincerely. Nick [email protected] phone 31166080

This was helpful (6) (Translated by Google)

Jakob Stougaard 14-12-2021
Hi Henrik, can you help with a picture of the lice you have made.

This was helpful (44) (Translated by Google)

Bo Levinsen 02-12-2022
Hi Henrik. Can you help me with the bug for error codes E13 because it is giving me problems. Sincerely. Bo Levinsen

This was helpful (24) (Translated by Google)

Torben Søgaard Hansen 04-04-2023
Hej Henrik Kan du hjælpe med et billede af den lus du har lavet og sende til [email protected]. På forhånd tak

This was helpful (1)

Henrik Steen Hansen 20-10-2023
Hi Henrik. Can you show me in pictures how I "flush" my Qlima oven. Pretty tired of it going out all the time. Have a bigger one too but it won't go out. Sincerely, Britt Fredensborg. 60607649

This was helpful (1) (Translated by Google)

Ole Johansen 25-11-2021
How to Luse Your oven When it comes with a code called E 17

reply | This was helpful (19) Read more (Translated by Google)

Majbritt Jørgensen 30-09-2022
Hvordan laver man en "lus" på sin ovn? For det er virkelig træls når den hele tiden slukker.

This was helpful (11)

Christian slot 01-12-2021
My zippo turns off and report error code E 11 what does that mean Can run for 2 min

reply | This was helpful (18) (Translated by Google)

Per Kastrup Madsen 27-12-2021
I have a problem with my SRE9046C-2 fan heater. it is in a 40 m2 large workshop. But after only approx. 5 min. turns it off and reports error E17. This is a mistake as not much Co2 can be built up after only 5 min. I would like to know how I lice the Co2 indicator off.

reply | This was helpful (18) (Translated by Google)

Finn jørgensen 19-06-2022
My qlima comes with e13 error after 20 sec approx. what can I do?? Has cleaned filter, changed petroleum.

reply | This was helpful (18) Read more (Translated by Google)

[email protected] 07-10-2022
My middle error E 13 what is it

This was helpful (12) (Translated by Google)

Ole Bjerre 06-12-2022
Just like many others, I have the E 13 error and have tried everything you can do. Can see someone cutting off the small sensor on the back of the oven and collecting some wires in a loop, that's the solution. The oven is only about 3 years old and not used much. Did I just buy some crap from a furnace.

This was helpful (0) (Translated by Google)

Mette Rasmussen 04-01-2022
I would really like a picture of how to put a “lice” on the Qlima oven. Our oven goes out all the time and reports error E17. Henrik Steen Hansen Can you send it to me?

reply | This was helpful (11) Read more (Translated by Google)

Henrik Steen Hansen 15-03-2022
Photo of how to lice for an E 17 error

This was helpful (36) (Translated by Google)

Paul Corbett 17-04-2022
I would also like to know how to make that lice. We can not use our oven at all as it constantly turns off and reports error E17.

This was helpful (0) (Translated by Google)

Kurt Nielsen 03-11-2022
Vår dan is made in lice there are 3 cords and what do you have to cut a lice red and brown and blue what needs to be cut so greetings Kurt send photo [email protected] to me please c2 must be cut vår

This was helpful (0) (Translated by Google)

Martin Olsen 08-10-2021
I would also like to see this lice as I have the same problem with my oven in my awning

reply | This was helpful (9) (Translated by Google)

Søren Jungdal 10-02-2022
My oven reports a bug e 02 Someone who can help.?

reply | This was helpful (9) (Translated by Google)

Helle Håkonsson 10-09-2022
I just bought a qlima SRE3230TC-2 It has been on 3 times for a few hours at a time. Today, on the 4th day, it burns with a yellow flame instead of the blue one and goes out after about 5 minutes, after which it shows error E 13. There is a lot of oil on it, so that's not why. It also smells more of petrol than the other days. Hoping for help soon ~ the oven is brand new. Regards Helle

reply | This was helpful (9) (Translated by Google)

Esther Bundgaard 19-09-2022
I am tired of error E13. Cleaned the filter which was clean. Aired out. Nothing helps - the error comes again... Now I'm sitting in the awning and freezing

reply | This was helpful (9) Read more (Translated by Google)

Mich franck 04-10-2022
Where to see answers

This was helpful (8) (Translated by Google)

Per Melsen 08-01-2022
Hi ! I have the same e17 error, do you have a description of how to make a lice? MVH Per Melsen

reply | This was helpful (5) Read more (Translated by Google)

per melsen 14-01-2022
CO2 sensor sits in front of ours, I have cut the sensor off, all 3 wires (red, blue and brown) then I have assembled blue and brown. Now it runs without any problems.

This was helpful (15) (Translated by Google)

Helge Hansen 17-02-2022
I have a 4kw that turns off and writes E17 I would like to see how to make such a louse as is talked about below.

reply | This was helpful (5) (Translated by Google)

Rene Rosenlyst 16-02-2022
It states up run blower burner run perfectly. But then the reporter E17 error

reply | This was helpful (3) (Translated by Google)

Michael Danielsen 29-03-2022
my report error 013

reply | This was helpful (3) (Translated by Google)

Michael Storbank 08-01-2022
Could also use help for image of de-lice on 9046. Kim you write you have cut the three wires. Have you collected blue and brown in a collection sleeve, or what do you mean? Thanks in advance. Michael

reply | This was helpful (2) Read more (Translated by Google)

Michael Storbank 17-01-2022
I contacted Klimabrands.dk, who were extremely helpful. I considered licking for a second, but that's not the point of the co2 alarm.

This was helpful (17) (Translated by Google)

Mads møller 03-04-2022
Please send me how to make lice for my heater so it does not write E 17 all the time.

reply | This was helpful (2) Read more (Translated by Google)

Mads møller 03-04-2022
At [email protected]

This was helpful (1) (Translated by Google)

Michael 17-04-2022
Hello. I have the same problem E17 .... I would like to see how it is lice, info can be sent to michael (.... @ ......) michaelsandgaard.dk

reply | This was helpful (2) (Translated by Google)

Poul F. Hansen 19-04-2022
I bought it on 6 / 4-2021 a Qlima SRE 9046 C 4.65 KW, it always comes with error code E17 and it is increased CO2 concentration and then the oven switches off. There is still yarn time on the oven, what do I do ???? [email protected]

reply | This was helpful (2) (Translated by Google)

Birgit Manthey 10-12-2022
Hello, ours goes out all the time and shows E17! What can we do? We're cold!

reply | This was helpful (2) Read more (Translated by Google)

Thomas M. 15-12-2022
Hello Birgit, you are using an unsuitable petroleum which is causing the error. Please proceed strictly according to the operating instructions and use a standardized high-purity petroleum such as the PTX2000.

This was helpful (3) (Translated by Google)

Charlotte Nørgreen 02-04-2023
What do I do with an error 13? Can it be solved?

reply | This was helpful (2) (Translated by Google)

Berit N Johansen 07-04-2023
Hi.. anyone know about error code F 06 ?

reply | This was helpful (2) (Translated by Google)

Peter mark 22-11-2023
I get the error e13 constantly, it goes out after a maximum of 20 SEK. Anything I can do?

reply | This was helpful (2)

Finn ottosen 27-12-2021
Can anyone tell me how to Luse the Ove 9046

reply | This was helpful (1) Read more (Translated by Google)

Kim 31-12-2021
Ours also reported E 17. CO2 sensor sits on the back of ours, I have cut the sensor off, all 3 wires (red, blue and brown) then I have assembled blue and brown. Now it runs without any problems.

This was helpful (20) (Translated by Google)

Niels Jensen 15-04-2022
I have a 4kw that turns off and writes E17 I would like to see how to make such a lice as is talked about below .. Thank you. [email protected]

reply | This was helpful (1) Read more (Translated by Google)

[email protected] 16-04-2022
Have the same error E17 I would like to see how to make that lice

This was helpful (5) (Translated by Google)

Mic franck 04-10-2022
E13 error

reply | This was helpful (1) (Translated by Google)

Christian Spaulding 30-10-2022
Min Qlima 9046 viser efter kort tid fejlkode E17 og så skal jeg lufte ud i mit 40m2 udhus. Er der en måde at få den minde sensitiv

reply | This was helpful (1) Read more

Thomas 03-11-2022
If you send me your email. then I can send you the solution

This was helpful (2) (Translated by Google)

Tommas Laursen 17-11-2022
Hi, my printer is E13, which seems to be the same as e17, how do I make it work on my qlima. ? It is in an awning with another. 4000w but another brand that does not. Sincerely. Thomas

reply | This was helpful (1) (Translated by Google)

Fouad 18-11-2022
Hello guys, same here, E17. Thanks [email protected]

reply | This was helpful (1)

Bo Levinsen 03-12-2022
Hi, can anyone help me with a lice so I avoid E-13 all the time

reply | This was helpful (1) Read more (Translated by Google)

Tommas H 26-12-2022
Hi Tommas, my e-mail is [email protected], would you like to send me a drawing of how you make such a LUS, thank you very much. Stay

This was helpful (0) (Translated by Google)

Thomas Molé 07-12-2022
Can someone help me here? I have a Qlima Petroleum heater type 3430 C2, which switches off after only about 2 minutes with the error message E17. I even opened the windows, the CO2 sensor is probably a bit too sensitive. Can someone help me here how to solve the problem? I had borrowed the same device from my brother and I didn't have this problem at all. Best thanks in advance!

reply | This was helpful (1) (Translated by Google)

Allan Jessing 02-04-2023
Like everyone else here, I'm struggling with error code e17, it's really annoying. Have it in a leaky awning so there is no lack of ventilation. If anyone knows how to fix it, I will be very happy. Mail: [email protected]

reply | This was helpful (1) (Translated by Google)

Stig Johansen 03-04-2023
I also have an E17 error, so if you could put a loop, I would very much like to see where it should be located, my oven is from 2014

reply | This was helpful (1) (Translated by Google)

Kirsten 13-04-2023
Our oven says error e 09 How do we solve it?

reply | This was helpful (1) (Translated by Google)

Arne Larsen 17-10-2023
Reports error E17, what do I do?

reply | This was helpful (1) (Translated by Google)

Arne Larsen 17-10-2023
Reports error E17, what do I do.. How do you make the solution that can solve the problem? Possibly. with picture. Send mail to [email protected]

reply | This was helpful (1) (Translated by Google)

Steen Hansen 19-10-2025
What does error code E13 mean on a Qlima oil oven.

reply | This was helpful (1) (Translated by Google)

Kristine Nielsen 23-10-2021
I would like to see how to "lice" Our oven has started to report the fault E17, It is in the awning, and has not shown the fault before, even though it has actually run a whole night ..

reply | This was helpful (0) Read more (Translated by Google)

Thomas H 24-10-2022
Enter your email and I can send you a solution :-)

This was helpful (0) (Translated by Google)

Paulina 19-04-2023
Hi. Jeg har en Qlima SRE9046C comfort. Jeg får hele tiden ejl E17. Må jeg have et billede og information yes. hvordan man slipper af med feylen e-mail: [email protected]

This was helpful (0) (Translated by Google)

Mogens Rasmussen 06-04-2022
HAS A QLIMA SRE 9046 C-2 THERE CONSTANTLY SCREAMS E17 HOW TO LOOK THAT MODEL

reply | This was helpful (0) Read more (Translated by Google)

Thomas H 24-10-2022
Write your email and I can send you a solution

This was helpful (3) (Translated by Google)

Thomas M 08-12-2022
Hello Thomas, I have a Qlima oven type here (type Sre 3430 C2) Unfortunately, the oven switches itself off after a short time (2-3 minutes) with the error message E17 from day one. In the operating instructions I get the message that the CO2 concentration in the room is too high. I've tried a few things, and even opened the windows while I was doing it. Can you please help me and send me your solution? My email address: ([email protected]) Thank you in advance! Thomas

This was helpful (3) (Translated by Google)

Thomas H 24-10-2022
And what should have been written was: Write your email and I can send you a solution :-)

This was helpful (2) (Translated by Google)

Klaus Kowalski 23-11-2025
Hello . Bought new device. Qlima sre 9046 c-2 Off every 3-4 minutes, error message e 17

This was helpful (1) (Translated by Google)

Brian Rasmussen 16-04-2022
Have the same mistake E17 I would like to see how to make that lice greeting brian

reply | This was helpful (0) Read more (Translated by Google)

Thomas H 24-10-2022
Write your email and I can send you a solution

This was helpful (2) (Translated by Google)

Jacob 07-11-2022
Hello Thomas I have the same problem as most of the people here (E17) you would be very welcome to send the solution Mail [email protected] Pft

This was helpful (0) (Translated by Google)

Rene siewecke 08-05-2022
Is there anyone who can post a picture of where to put that lice My email is [email protected]

reply | This was helpful (0) (Translated by Google)

Niels-Peter Nielsen 04-06-2022
Hi there is someone who can send picture of lusnig of CO2 censor error code E17 [email protected]

reply | This was helpful (0) (Translated by Google)

Jørn 19-09-2022
Jørn 19-09-2022 Would like to know how to make lice so that our qlima 9046 does not write e 17 all the time

reply | This was helpful (0) Read more (Translated by Google)

Thomas H 24-10-2022
Send your email and I can send you a solution

This was helpful (3) (Translated by Google)

Rasmus 02-04-2023
Hi Thomas H. If you see this i would also lige a solution for the E-17 problem on a Qlima 9046 [email protected]

This was helpful (0)

Tom jørgensen 20-10-2022
Can I be told what I can do when my oven shows error code E2 and it does not start

reply | This was helpful (0) (Translated by Google)

Thomas H 22-10-2022
I have a Qlima 8040 and a manual to fix the E17 problem. Write if you are interested.

reply | This was helpful (0) Read more (Translated by Google)

Bibi 21-10-2023
Will you send me the solution to the e17 error? [email protected] Thanks in advance

This was helpful (2) (Translated by Google)

Anne Marie r 09-11-2022
Hi Thomas h, I am interested in fixing the problem with e17 [email protected]

This was helpful (1) (Translated by Google)

Heidi 19-11-2022
Hello Thomas. H Having the same problem with E 17 error. Would you mind sending me something so I can fix it. [email protected] Etc. Heidi

This was helpful (1) (Translated by Google)

John L 20-11-2022
Hi Thomas, would appreciate to get your solution , [email protected]

This was helpful (1)

Dominik 26-03-2023
Hi Thomas. Please send the solution to switch off the E17 error. [email protected] Thank you very much. greetings Dominik

This was helpful (1) (Translated by Google)

Tom christiansen 30-03-2023
Hello Would you like to send me the instructions on how to make lice so that the E17 error does not come all the time Etc. Tom [email protected]

This was helpful (1) (Translated by Google)

Stefanie Johansen 03-04-2023
I would also like to receive some guidance as we have the same problem with our oven. My email is [email protected]

This was helpful (1) (Translated by Google)

Ole 21-11-2022
Hello Thomas. Could I have a hint about E17 and changing the circuit with a loop. Sincerely Ole [email protected]

This was helpful (0) (Translated by Google)

Tommas Laursen 26-11-2022
Hi there. Will you send it to me? [email protected]

This was helpful (0) (Translated by Google)

Fred 27-02-2023
same problem here, E17 can you please send me re-wiring solution Thx Fred [email protected]

This was helpful (0) (Translated by Google)

Finn Zeberg 24-10-2022
my oven stops after 10 min with error e17 what do I do

reply | This was helpful (0) Read more (Translated by Google)

Thomas H 24-10-2022
If you send me your email I can send you the solution

This was helpful (8) (Translated by Google)

Morten Skytte 26-10-2022
Error E17 - Would really like an email with picture instructions on how to make this "lice"? Email: [email protected] Dbh Morten Skytte

reply | This was helpful (0) Read more (Translated by Google)

Kenn Borggaard 18-12-2022
Would like to see how to make that louse into a sensor [email protected]

This was helpful (0) (Translated by Google)

Peter Boysen 28-10-2022
How do I remove error code e13

reply | This was helpful (0) (Translated by Google)

Benny C 29-11-2022
Hi Like many others, I also get error e17. Someone who wants to send how to make such a louse? [email protected]

reply | This was helpful (0) (Translated by Google)

Magdalena 09-12-2022
My device shows E13 what does it mean?

reply | This was helpful (0) Read more (Translated by Google)

Thomas M. 09-12-2022
This means that the CO2 sensor has responded. It is best to ventilate well, pull the plug and then switch it on again.

This was helpful (0) (Translated by Google)

Mads 16-12-2022
Samme problem fejl e17. Hvordan har du lavet din lus? [email protected]

reply | This was helpful (0)

Nick 17-12-2022
Our oil stove Tectro cannot be used, we received E13 on the shame CONSTANTLY. We have done everything, but still the error is reported.

reply | This was helpful (0) (Translated by Google)

Palle jørgensen 17-12-2022
Hello everyone, I would very much like some help on how to make lice on the wiring myself, I have 2 ovens that are teasing. I see that some time ago Henrik Steen larsen offered to send pictures. Can someone pass these on to me? Etc. Pallet Email [email protected]

reply | This was helpful (0) Read more (Translated by Google)

Helge 18-12-2022
on mine I have removed the front seat to get to the CO2 sensor and on some models it is at the back I have cut off the sensor, all 3 wires (red, blue and brown) then I have collected blue and brown. Now it runs without problems.

This was helpful (1) (Translated by Google)

Asger T 12-01-2023
Sre3230 tc-2 Can anyone help with error E13,,exiting constantly. Is totally cleaned. Has been submitted..., who has the solution/pictures of patching. [email protected]

This was helpful (0) (Translated by Google)

Erna Kristensen 19-12-2022
Hi Henrik Steen Hansen, would you like to send a picture of the louse on the qlima oven to [email protected]

reply | This was helpful (0) (Translated by Google)

Lill Andersen 19-12-2022
Hi My oven writes E17 error Can read that there are many with the same problem... and that you can get the recipe for a louse so that it doesn't have to do it again [email protected]

reply | This was helpful (0) (Translated by Google)

kimberley worswick 21-01-2023
Hello I seem to have the same problem always E17 after a few mins of running it’s in a 30m2 Mobil home with plenty of ventilation can someone help pls It a Qlima I think a 3.5kw

reply | This was helpful (0)

André Lilja 28-01-2023
Is there anyone here who can help with the CO2 sensor on a 4kw Qlima oven. It has started to come with E17 often, can see that others have had the same problem

reply | This was helpful (0) (Translated by Google)

Anette Nissen 28-01-2023
Hello. We just bought this QLIMA SRE3531TC-2 It smells a lot while heating. Is it normal?

reply | This was helpful (0) (Translated by Google)

René 29-01-2023
Why does it report E13 all the time

reply | This was helpful (0) (Translated by Google)

Christian sønderby 07-02-2023
Henrik Steen. Hansen Having the same problem with 2 of my fan heaters, Will you send me how to make a louse. [email protected]

reply | This was helpful (0) Read more (Translated by Google)

Nick Ahmady 07-02-2023
I also have two of them with the same problem error E13. It's completely hopeless that we can't get our money back and have to wait for someone to come out of the sky and make the wrapping disappear. Worst machines in particular: SRE5035c

This was helpful (0) (Translated by Google)

Per Hansen 15-02-2023
Not getting any answers on how to solve error E 13 There are lots of questions but no answers.

reply | This was helpful (0) (Translated by Google)

Søren Rasmussen 18-02-2023
Have a Qlima oven and get errors all the time, does E13 have a solution?

reply | This was helpful (0) (Translated by Google)

Søren Rasmussen 18-02-2023
It's hopeless with error E13, can't find anything on the net, does anyone have a solution to this error Type SRE0031TC Preferably by email [email protected]

reply | This was helpful (0) (Translated by Google)

Kenneth Zimmermann 20-02-2023
Hi, I also have the error E13 on the stove all the time would also like a picture of how to splice wires from the sensor together MVH Kenneth

reply | This was helpful (0) (Translated by Google)

Brian 21-02-2023
I have error e13 it turns off after 20 sec Can I do something.

reply | This was helpful (0) (Translated by Google)

Johnny Michel 27-02-2023
Best, Constant message e17 on my QLIMA. Product is new!! Ventilation does not help. What can I do. Email: [email protected] Thank you in advance.

reply | This was helpful (0) (Translated by Google)

Ole Nøhr Christensen 02-03-2023
I get error E13 what does it mean?

reply | This was helpful (0) (Translated by Google)

Ole Nøhr 02-03-2023
Jeg har fundet denne forklaring på fejl E13 I manualen står følgende: “Kaminen er blevet slukket i et lukket rum” (Sikkerhedssystemet mod mangelfuld forbrænding virkede”. Klares ved at lufte rummet ud og starte kaminen igen.

reply | This was helpful (0)

Jakob Tue 02-04-2023
Error 13 what do I do

reply | This was helpful (0) (Translated by Google)

Henrik Steen Hansen 04-04-2023
Hi Henrik, can you send pictures of how to lice a Qulima petroleum stove to email [email protected] mvh Mona

reply | This was helpful (0) Read more (Translated by Google)

Henrik Steen hansen 06-04-2023
Can you send me a picture of how I make a louse, my email is [email protected].

This was helpful (0) (Translated by Google)

Michella Hoppe 06-04-2023
I would also very much like to receive a description picture of the "lice" for error E17. We are camping and can't keep the heat. Mvh Michelle [email protected]

reply | This was helpful (0) (Translated by Google)

Per Hansen 28-04-2023
Never buy a qlima heater again, there is only trouble with them

reply | This was helpful (0) (Translated by Google)

Benny hein 21-05-2023
Error e 17 on qlima oven Does anyone have a picture of where to put the lice

reply | This was helpful (0) (Translated by Google)

Per Hansen 01-06-2023
Where can I find the answers to the questions asked?

reply | This was helpful (0) (Translated by Google)

Ole Nøhr christensen 03-06-2023
To everyone with various errors - you can contact Klimabrands in Pandrup, they can answer your questions. Error E13 means that the burners are clogged and must be cleaned. They have a link to a short video showing how to do it yourself.

reply | This was helpful (0) Read more (Translated by Google)

Nick 03-06-2023
The things they say and write about error E13 are NOT TRUE. Because after cleaning the error comes back. I gave up

This was helpful (0) (Translated by Google)

Hans Jørgen Larsen 18-07-2023
I have an error code E09 on my Qlima fan heater - what does it mean and what do I do?

reply | This was helpful (0) (Translated by Google)

Kåre Bruun 03-08-2023
Hello My Qlima 4Kw Writes error E 09 Filter I have had the bottom filter up and blown with compressed air, the rear cover (blower motor) off and tried to blow carefully. But still same error. What should/can I do? Regards, Kåre

reply | This was helpful (0) (Translated by Google)

Henrik steen Hansen 15-10-2023
Henrik you can send a photo of lice co-sponsor e17. Thanks. [email protected]

reply | This was helpful (0) (Translated by Google)

Arne Larsen 17-10-2023
My oven reports error E17, how to remedy this. Send any an email to [email protected] with an explanation. Possibly. a picture of what you do.

reply | This was helpful (0) (Translated by Google)

Markus f. 18-10-2023
Hello Thomas, I have a Qlima SER 9046 c and it shows E17. Please send me a solution. [email protected] Best thanks in advance

reply | This was helpful (0) (Translated by Google)

Bo Lorenzen 26-10-2023
I have error e13 on a 2-year-old above, where do you do it?

reply | This was helpful (0) Read more (Translated by Google)

Ole 23-11-2023
You need to clean the burner there is a video on YouTube. Just search for "clean burner on oil stove" and you should be able to find it. It solved the problem on mine.

This was helpful (0) (Translated by Google)

Søren Slemming 23-11-2023
Getting error E17 on my SRE9046C what do I do, I can understand it's something with a louse and how do I do it

reply | This was helpful (0) Read more (Translated by Google)

Palle Høj 26-11-2023
26-11-2033. Fejl E17 hvad gør jeg .?

This was helpful (0)

Karen Marie 08-12-2023
I constantly get the error e13, it goes out after max 20 SEK. Can I do something?

reply | This was helpful (0) Read more (Translated by Google)

Ole 09-12-2023
You need to clean your burner. There are videos showing how

This was helpful (1) (Translated by Google)

Inge Poulsen 13-01-2024
Henrik Stern Hansen My Oven also reports E17 Is there someone who wants to send me a picture and an explanation of how to make the "louse"? Thanks in advance. [email protected]

reply | This was helpful (0) (Translated by Google)

Hans-Josef Hubo 31-03-2024
I have an error message E03, what happened?

reply | This was helpful (0) (Translated by Google)

Benjamin Nielsen 01-04-2024
Is there someone who wants to send a picture of how to make a bug on my Qlima above when it says E17 all the time [email protected]

reply | This was helpful (0) (Translated by Google)

Hans-Jørgen Nielsen 05-05-2024
I have the same problem with the oven type E17, how do I fix the lice you are talking about,

reply | This was helpful (0) (Translated by Google)

Heinz Bremer 09-06-2024
The heater is designed in such a way that it only uses the expensive certain petroleum and not other, cheaper types. What can I do to use other types for heating?

reply | This was helpful (0) (Translated by Google)

Jansen 22-11-2024
Just new stove. Always results with code E17. Space is really well ventilated. And the stove is well away from the wall. How can I solve this?

reply | This was helpful (0) (Translated by Google)

Brian 08-12-2024
What is the E17 CODE? [email protected]

reply | This was helpful (0) (Translated by Google)

Brian 08-12-2024
How do I get a copy of the manual for a Qlima heater?

reply | This was helpful (0) (Translated by Google)

Dennis 26-12-2024
Error E17 Don't know what that means.. Can you help..?

reply | This was helpful (0) (Translated by Google)

Heidi Skåre 13-10-2025
It shows e 9 errors on the display, what is the fejl

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your Qlima SRE9046C Heater. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Qlima. They might be able to provide an original manual. Are you looking for the manual of your Qlima SRE9046C Heater in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Qlima
Model	SRE9046C
Category	Heaters
File type	PDF
File size	2.04 MB

All manuals for Qlima Heaters
More manuals of Heaters

Frequently Asked Questions about Qlima SRE9046C Heater

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How does dust affect the efficiency of a heater? Verified

Dust can accumulate on the heating elements and in the air filters of a heater, reducing its efficiency. This can cause the heater to work harder to produce the same amount of heat, leading to increased energy consumption and higher utility bills. To maintain the efficiency of your heater, make sure to clean it regularly and replace the air filter as needed.

This was helpful (208) Read more

How do I determine the size of heater I need for a room? Verified

The size of the heater you need for a room depends on the size of the room and the insulation of the space. A general rule of thumb is to use 60 watts per square meter of space. For example, if a room is 14 square meter, a 840-watt heater would be appropriate.

This was helpful (174) Read more