Manual Pyle PRMC600 Banknote Counter

Need a manual for your Pyle PRMC600 Banknote Counter? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

10.Maintenance
---Do not operate the unit in areas with high temperature or high humidity since it may damage the machine.
---When not using the unit for a long time, remove the power plug from the wall outlet.
---Never operate the unit under strong light.
---Clean the machine frequently after switching off and unpluging of the machine.
---Do not use this product in areas where it may be exposed to water or other liquids.
---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaner. Use a brush or a damp cloth for cleaning.
---Rotate towards left to increase the thickness <see figure 5>
---When the problem is not solved with the adjustment of the wheel, the rubber should be replaced.
---Press the hopper plate to change a new rubber <see figure6> or you can send the machine to authorized service center.
10
Figure4 Figure5 Figure6
7. Counterfeit Detection
UV(Ultraviolet)detection function<available for the model with UV detection or the model with both UV and MG detections>
------ check all kinds of banknotes which contains UV features
---The UV function is automatically turned on by default when the machine is powered up. It can also be selected or deselected by
pressing the CF button located in the function console.
---If the machine detects a counterfeit note when counting, it will stop and emit beeping sound, while the batch display will show the
messaged1and the UV indicator will blink (alerting the user the presence of a dubious bill). The dubious bill will always be the
last one on the stacker. Remove the dubious bill, pressRESETbutton to continue.
---The sensitivity of UV detection can be adjusted. Hold SETbutton for 3 seconds until the batch display shows the current sensitivity
level SE4/120then press or button to choose the desired sensitivity level (range from 0-200). After choosing of the level,
restart the machine to confirm.
MG (Magnetic) detection function<available for the the models with both UV and MG detections>
------ check all kinds of banknotes which contains MG features
---The MG function is automatically turned on by default when the machine is powered up. It can also be selected or deselected by
pressing the CF button located in the function console.
---If the machine detects a counterfeit note when counting, it will stop and emit beeping sound, while the batch display will show the
message d2 and the MG indicator will blink (alerting the user the presence of a dubious bill). The dubious bill will always be the
last one on the stacker. Remove the dubious bill, pressRESETbutton to continue.
---The sensitivity of MG detection can be adjusted. HoldSETbutton for 3 seconds, the counting display will show the current sensitivity
levelSE5/5 then press or button to choose the desired sensitivity level (range from 0-50). After choosing of the level,
restart the machine to confirm.
Note:holdSETbutton for 3 seconds SE5is used to adjustMG1sensitivity level, SE6is used to adjustMG2
sensitivity level.
6
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
Note: The counting mode can be changed between Automatic and Manual. When turn on the machine,“AUTO”indicator is on, the machine
is in automatic counting mode; press the AUTO button , the “AUTO” indicator will be off, the machine is in manual counting mode, under
this mode, only pressing theRESETbutton after placing the bills to start counting.
2>Addition Function.
Addition can be performed by pressing the ADD button (when the ADD indicator is on). In this case, removing the counted bills from
the stack will not clear the quantity counted and shown on the counting display. The next bills placed in the hopper will be counted and
added to the preceding quantity. The total amount of added bills will be shown on the counting screen. Press theADD button to close
the function and clear the counting display.
3>Batch Function.
---The preset batch function can be performed by pressing theBATCH” button(the BATCH indicator will appear). By default,
when pressing the “BATCH”,the batch function is turn on. The batch number can be set in amounts between 1 and 999 by pressing
NO.“0”-9” button. To clear this function, press the “BATCH”button until the indicator is off.
---Under the batch counting mode, once the hopper is loaded, the machine will start counting and stop when the counted quantity reaches
the preset batch one.
---To repeat the batch counting operation under the same preset batch quantity, just remove the counted bill from the stacker. The unit will
batch the next group of bills under the same settings.
---If you wish to keep batching without removing the preset number, press theRESETbutton.
---If the counted number does not tally with the preset batch number, the counter display will show the quantity with blinking number.
---When counting with MG and/or UV detection on, the machine will stop automatically when detecting counterfeit currency. This function
can be resumed by removing the dubious bill from the stacker and pressingRESETbutton.
5
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
8.Error message and solution
8
The batch display may shows some error message when counting, which means there are some problems with the machine.
Refer to the following diagram to find way to solve it.
Message
Error
Solution
Suspicious bill detected by UV system
Problem in the UV system
Remove the suspicious bill from the
stacker, press RESET to continue;
Lower the UV sensitivity.
Suspicious bill detected by MG system;
Problem in the MG system.
Remove the suspicious bill from the
stacker, press RESET to continue;
Lower the MG sensitivity.
Half-note detected by half-note detection
system; Problem in the half-note
detection system.
Remove the suspicious bill from the
stacker, press RESET to continue;
Remove the suspicious bill from the
stacker,press “RESET” to continue.
Remove the suspicious bill from the
stacker, press RESET to continue;
Slope-note detected by Slope-note detection
system; Problem in the slope-note detection
system.
Chain-note detected by the counting sensor
Note of size problem detected by size
detection system; Problem in the size
detection system
Remove the suspicious bill from the
stacker, press RESET to continue;
Lower the size checking sensitivity.
Double-note detected by IR system
Problem in the IR system
Remove the suspicious bill from the
stacker, press RESET to continue;
Lower the IR sensitivity.
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
To be the latest generation of bill counter, the model is the vanguard of our evolution in bill counting technology. Its compact and
stylish design is as remarkable as its integrated electronics and multifunction capabilities. Different from other counters,
it employs many new detection methods which other counters don't have. Being improved in many aspects
of internal structure which make it quite different from other bill counters, this hi-tech compact counting machine is easy to
operate and repair. It is sturdy and utterly reliable and suitable for all kinds of banking industry and store department.
We recommend the user to verify that gift box contains all of the items listed here:
①.Machine body . Operation manual
. Power wire . Brush
. Fuse
. External display(Optional part)
---Read and understand all of the instructions and
warnings both on the machine and in the manual.
---Follow all warnings and instructions marked on the unit.
---This product should be operated only from the type of the power source indicated in the user's guide. If you are not sure of the type of
power supply in your location, consult your dealer or local power company.
---Only use the cable provided with the unit. The use of other cable may result in electric shock, fire or bring serious damage to the unit.
---Never push objects of any kind into the unit through case slots, since they may touch dangerous voltage points or shortcut parts, resulting
in a risk of fire or electric shock.
---Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If the liquid has been spilled into the unit.
c. If the unit has been exposed to rain or water.
d. If the machine has been dropped or the case has been damaged.
e. If the product shows a noticeable change in performance.
4. Safety instruction
3
3. General instruction
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
1. Illustration
Counting sensor
Counting sensor
Auto start sensor
Feeding roller
Preset sensor
Power switch
External screen jack
Bill thickness
adjustment
wheel screw
Power outlet
Rubber tongue
UV sensor
External screen
Hopper Block
Handle
Stacker
Frontal platform
Hopper
Impeller
Control Panel
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
1
980反 咬口 黑 2015.06.07
d1
d2
d3
d4
d5
d6
d7
oney
oney oney oney
ounterounterounter
mmm c c c
OPERATION MANUAL
Professional Manufacturer For Money Counter
And Counterfeit Detector
Double Detection function (UV and MG)<available for the models with UV detection or the model with both UV and MG detection>
---Used to check double-note
---By default, serving as a supplementary function, the detection can be activated when the unit is powered up.
---If the machine detects a double-note when counting, it will stop and emit beeping sound, while the batch display
will show the message “d3" (alerting the user of the presence of a double-note). The double-note will always be the
last one on the stacker. Remove the dubious bill, press RESETbutton to continue.
Half-note Detection Function <available for the models with UV detection or the model with both UV and MG detection>
---Used to check half-note.
---By default, serving as a supplementary function, the half-note detection can be activated when the unit is powered up.
---If the machine detects a half-note when counting, it will stop and emit beeping sound, while the counting display will show the message
d5alerting the user the presence of a half-note bill). The dubious bill will always be the last one on the stacker. Remove the dubious
bill, pressRESETbutton to continue <the counting display will clear>.
Note: User can resume the original set of sensitivity level by manufacturer. Press ADD button for 3 seconds, the display will show ---
which means the sensitivity restores factory setting now.
7
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
---To reduce the risk of electric shock, do not disassemble this product.Take it to qualified service personnel when service or repair work
is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric
shock when the appliance is subsequently used.
---Do not use the unit if the power cord is damaged or if the plug socket contact is loose. Not following those instructions may result in
electric shock , fire or other hazards.
---When unplugging the power plug, do not pull it by the cord but rather grip the plug and pull it out, not following those instruction may
result in electric shock, fire or damage to the unit.
5.Power up
6.Counting function
---Connect the power cord to the machine (power outlet), then plug it to power source and switch the unit on; the unit will conduct a
self-check by spanning the feeding roller while the MG and/or UV functions will be automatically turned on by default. The counting
display will show 0 when the unit is ready<the machine is in its normal working condition>.
1>Counting Function
Once the bills are correctly placed in the hopper, the machine will start counting automatically. The number of counted bills will be shown
on the counting display. Moreover, once the bills are removed
from the stacker, the counting display will be clear and the batch
display in turn will show the number of counted bills instead.
Bills should be correctly placed as indicated in the following steps:
Place the bills between the counting guides as shown in the figure1
and figure2. Swiftly, push the bills with a figure<see figure3>
to make them rest on the top of the hopper plate, in the correct
counting position.
4
Figure 1 Figure 2 Figure 3
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
9.Hopper adjustment
---When improper feeding of bills occur, adjust the feeding thickness setting in the hopper by tuning the adjustor wheel located in the
back of the machine to ensure proper feeding.
---Rotate towards right to diminish the thickness <see figure 4>
9
Generally speaking, most of the above-mentioned problems may be caused by dust or dirt inside of
the machine. So keeping the machine clean is highly recommended .
Message
Error
Solution
E01
Problem with the left counting sensor
Clean the sensor or replace it
E02
Clean the sensor or replace it
Problem with the right counting sensor
Problem with the speed sensor
Clean the sensor or replace it
E03
Problem with the auto start sensor
Clean the sensor or replace it
E04
Problem with the preset sensor
Clean the sensor or replace it
E05
Clean the sensor or replace it
E10
Problem with the UV sensor
2. Function controls and display
2. Function controls and display
---before operation, please be clear which model you have bought
---before operation, please be clear which model you have bought2. Function controls and display---before operation, please be clear which model you have bought
A. CFbutton(Detection function)
B. AUTO” button
C. 0-9 button(Batch function)
D. DD button
E. BATCH button
F. RESET button
G.SETbutton(Set the parameter)
H. ADDbutton(Addition function)
I. Cbutton(Cancel function)
J.IRbutton
The model with UV/MG1/MG2/IR/DD counterfei t detection
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
2
11.Specification
Dimension 320mmx265mmx170mm
Gross weight: 7.0kgs
Net weight 5 .8kgs
Power supply AC230V±10%,50Hz±5%; AC120V±10%,60Hz±5%; DC85-250V,50-60Hz
Power consumption 70W
Banknote size Min 50mm x 110mm ; Max90mm x 190mm
Counting speed 1050pcs/min
Batch range 1-999
Counting display Front color LCD+Side LCD display
11
Suitableforbothnew,old,dirty,tatteredpolymerbillsandpaperbills
CONTENT
1.Illustration---------------------------------------------------------------------------------1
2.Function controls and display----------------------------------------------------------2
3.General instruction-----------------------------------------------------------------------3
3-4
4.Safety instruction ------------------------------------------------------------------------
5.Power up-----------------------------------------------------------------------------------4
6.Counting function-------------------------------------------------------------------------4-5
7.Counterfeit Detection--------------------------------------------------------------------
6-7
8.Error code and solution -----------------------------------------------------------------8-9
9.Hopper adjustment-----------------------------------------------------------------------9-10
10.Maintenance-----------------------------------------------------------------------------10
11.Specification ----------------------------------------------------------------------------11
980正 咬口 黑 2015.06.07
E B J G FI
A H C D
Download manual in English (PDF, 0.98 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Pyle PRMC600 Banknote Counter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Pyle PRMC600 Banknote Counter?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Pyle PRMC600 Banknote Counter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Pyle PRMC600 Banknote Counter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Pyle. They might be able to provide an original manual. Are you looking for the manual of your Pyle PRMC600 Banknote Counter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Pyle
Model PRMC600
Category Banknote Counters
File type PDF
File size 0.98 MB

All manuals for Pyle Banknote Counters
More manuals of Banknote Counters

Frequently Asked Questions about Pyle PRMC600 Banknote Counter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can a banknote counter only count banknotes? Verified

Many banknote counters can also count other paper items of a similar size, such as tickets and coupons.

This was helpful (18) Read more
Manual Pyle PRMC600 Banknote Counter

Related products

Related categories