Home > Audio, TV & Photo > Turntables > Pro-Ject Turntables > Pro-Ject Primary E Turntable

Manual Pro-Ject Primary E Turntable

Need a manual for your Pro-Ject Primary E Turntable? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Cartridge downforce adjustment

The counterweight (8) supplied is suitable for cartridges weighing between 3 - 7g (weight no. 81). The

counterweight is pre-set perfectly from the factory.

In case you need to set the tracking force, please read following instructions:

Place the stylus pressure gauge onto the platter

To adjust the amount of pressure, carefully move the

counterweight along the support rod, until the stylus pressure is sufficient to raise the pressure gauge

to the level position. Moving the counterweight away from the cartridge will reduce pressure and

towards will increase pressure. Finally secure the counterweight using hexagonal key provided.

If the stylus gauge becomes level, then the correct pressure has been achieved. However if the there is

insufficient or excessive pressure the gauge will either not move or tilt down.

Connection to the amplifier

The record player has a captive tonearm signal lead (11) for connection to the amplifier. Use the Phono

input (sometimes labelled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers

correct matching and amplification for the type of cartridge used. Line inputs (such as CD, Tuner, Tape or

Video) are not suitable.

Take care about connecting the left and right channel correctly. The right channel is usually marked

red, the left channel black or white. Check the manual of your amplifier for relevant information. An

earthing wire may be connected to the screw terminal between the sockets if you encounter humming

problems.

If your amplifier does not have an input suitable for phono cartridges you will require a separate

phono amplifier stage for MM or MC cartridges which is then connected between the record player and

a free line level input of the amplifier.

For detailed product information regarding Pro-Ject Audio Phono Amplifiers please refer to the Pro-

Ject web site www.project-audio.com.

Mains power connection

The turntable is supplied with a power cord suitable your country’s mains supply. Connect the power

cord to the mains.

Fitting the lid

Fit the lid (dust cover) carefully over the hinge prongs and adjust the screws (9) until the lid stays open

where you want it to without being too stiff to open or close.

Switching on and off

Pressing the power switch (1) alternately starts or stops the motor.

Rating

Let us know what you think about the Pro-Ject Primary E Turntable by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Pro-Ject Primary E Turntable?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Pro-Ject Primary E Turntable. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Pro-Ject Primary E Turntable. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Pro-Ject. They might be able to provide an original manual. Are you looking for the manual of your Pro-Ject Primary E Turntable in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Pro-Ject
Model	Primary E
Category	Turntables
File type	PDF
File size	0.28 MB

All manuals for Pro-Ject Turntables
More manuals of Turntables

Frequently Asked Questions about Pro-Ject Primary E Turntable

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

When should I replace the needle on my turntable? Verified

This depends on the needle but in general a needle will last 500-2000 playing hours, depending on the quality of the needle. When buying a second hand turntable, always replace the needle as a preventive measure. Not replacing the needle in time can lead to damage to the records.

This was helpful (303) Read more