Home > Household appliances > Water Dispensers > Primo Water Dispensers > Primo 601256-SO Water Dispenser

Manual Primo 601256-SO Water Dispenser

Need a manual for your Primo 601256-SO Water Dispenser? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

QUICK START GUIDE

1. Place the dispenser on a level ﬂoor surface in the desired

location in your home. Product is intended for indoor use

only. [Note: Do NOT plug

power cord into wall outlet

until instructed.]

2. Position dispenser so the back is at least

4 inches from wall and there are at least

4 inches of clearance on both sides.

3. Slide drip tray into place.

4. Clean probe with a damp cloth and

dish soap. (Visit PrimoWater.com

for detailed cleaning instructions.)

Place probe assembly on hanger

inside door to keep it clean.

5. Grab a bottle of Primo

water

(sold separately) and fully remove

the cap. Insert probe assembly

into bottle. Press ﬁrmly to secure

assembly over bottle opening. For

11.3-liter bottles, squeeze the tabs

on the top of the probe assembly

to separate the probe cap from the

collar and press the collar securely

over the bottle opening.

6. Slide bottle inside the cabinet and

close cabinet door. [Note: Water will

not pump from bottle unless door is

fully closed.]

7. Plug dispenser into a ground fault circuit

interrupting (GFCI) outlet. You will hear the

dispenser begin to pump water to ﬁll the

internal hot and cold reservoirs.

8. Turn on desired functions by ﬂipping the switches on the

back of the dispenser to the ON position.

Green – chills water

Red – heats water

Blue – night light

Black – runs a self-

sanitization cycle (press

and hold for 3 seconds)

Note: To run a cycle, press and hold the black switch

on the back of the dispenser for 3 seconds. The self-

sanitization cycle takes 90 minutes to complete. We do

not recommend dispensing or drinking water during

this cycle as it may have a slight odor from the harmless

ozone. This odor will completely dissipate a couple of

minutes after the cycle is complete.

9. Once the dispenser has stopped ﬁlling the

internal reservoirs, dispense and dispose at

least 1 quart (approximately 2 pint glasses) of

water from the cold, cool, and hot spouts.

10. Your water will be ready

to dispense fully chilled

in approximately 1

hour or piping – hot in

approximately 12 minutes.

11. Register your dispenser on our customer support page

at PrimoWater.com to activate your warranty, which runs

for 1 year from date of purchase.

WATER DISPENSING CONTROLS

Dark Blue - Cold

Light Blue - Cool

Red - Hot

INDICATOR LIGHTS

Green light on ON icon

indicates the dispenser is plugged in.

Green ﬂashing ON icon indicates the

self-sazitization cycle is in process.

Green light on snowﬂake

indicates the dispenser is cooling water.

Green light on wavy lines

indicates the dispenser is heating water.

Blinking red light on the bottle icon

indicates the bottle is empty.

SPOUTS – Right dispenses cold water, left dispenses hot

water and center dispenses cool water.

LED NIGHTLIGHT – Helps in low light situations.

DRIP TRAY WITH FULL INDICATOR – Removable and

dishwasher-safe. Red indicator rises when it’s time to empty.

PROBE ASSEMBLY – Probe pumps water from the bottle

into the hot and cold reservoirs.

PROBE HANGER – Rest probe assembly on the hanger

(located inside the cabinet door) to keep it clean while

replacing bottles.

BOTTOM LOADING DESIGN – Bottles ﬁt inside

bottom of cabinet for easy use.

WATER BOTTLE – Sold separately. Uses 3 and 5-gallon

bottles. Visit PrimoWater.com to ﬁnd Primo

water at the

store nearest you.

FEATURES

Inside of door

1 HR 12MIN

1 2 3 4

Deluxe Bottom-Loading Water Dispenser #601256SO B264

with Self-Sanitization

WHATYOU’LLNEEDTOHAVEHANDY

1. Primo

Water Dispenser

2. Drip tray (included)

3. 3- or 5-gallon bottle of Primo

water (sold separately)

4. Damp cloth (not included)

5. Dish soap (not included)

Primo® Pre-Filled Exchange Water or

Self-Service Reﬁll Water from Primo®

(sold separately)

Available at thousands of locations nationwide.

Learn more at PrimoWater.com/locations.

Gallon

4 5

Join our community by following us on social and signing up for our emails.

We share tips for healthy living, important news about water, new product announcements and special offers.

19-PRMO-2776_BL_Deluxe_Manual_601256SO_FINAL.indd 2-3 2/19/19 4:30 PM

Rating

Let us know what you think about the Primo 601256-SO Water Dispenser by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Primo 601256-SO Water Dispenser?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Primo 601256-SO Water Dispenser. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Primo 601256-SO Water Dispenser. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Primo. They might be able to provide an original manual. Are you looking for the manual of your Primo 601256-SO Water Dispenser in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.