Home > Garden & Terrace > Leaf Blowers > Poulan Leaf Blowers > Poulan PRB26 Leaf Blower

Manual Poulan PRB26 Leaf Blower

Need a manual for your Poulan PRB26 Leaf Blower? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSPECT AND CLEAN UNIT AND DECALS

• After each use, inspect complete unit for loose or

damaged parts.

• Clean the unit using a damp cloth with a mild detergent.

Wipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air lter decreases engine performance and

increases fuel consumption. Always clean after every

10 hours of operation, or more frequently in dusty

environments.

1. Clean the cover and the area around it to keep debris

from falling into the carburetor chamber when the

cover is removed.

2. Loosen knob to open air lter cover.

3. Remove air lter.

NOTE: Do not clean lter in gasoline or other ammable

solvent. Doing so can create a re hazard or produce

harmful vapors.

4. Wash the lter in soap and water.

5. Allow lter to dry.

6. Apply a few drops of lter oil to the lter; squeeze lter

to distribute oil.

7. Replace parts.

REPLACE SPARK PLUG

Replace spark plug each year to ensure the engine starts

easier and runs better.

Set spark plug gap at 0.6-0.7 mm. Ignition timing is xed,

nonadjustable.

NOTE: This spark ignition system complies with the

Canadian standard ICES-002.

1. Twist, then pull off spark plug boot.

2. Remove spark plug from cylinder and discard.

3. Replace with Champion RCJ-6Y spark plug and

tighten securely with a 3/4 inch socket wrench.

4. Reinstall the spark plug boot.

INSPECT MUFFLER AND SPARK ARRESTING

SCREEN

a WARNING: The mufer on this product contains

chemicals known to the State of California to

cause cancer.

As your unit is used, carbon deposits build up on the mufer

and spark arresting screen and must be removed to avoid

creating a re hazard or affecting engine performance.

For normal homeowner use, the mufer and spark arresting

screen will not require any service. After 50 hours of use,

we recommend that your mufer be serviced or replaced by

your authorized service dealer.

CARBURETOR ADJUSTMENTS

1. Start the engine normally.

2. Run the engine at idle speed until operating temperature

is reached (2-3 minutes).

3. Use a screwdriver to turn the engine idle speed

adjustment screw.

• Turn the idle screw clockwise to increase engine idle

speed.

• Turn the idle screw counterclockwise to decrease engine

idle speed.

If your engine will not run properly or you require further

assistance, contact an authorized service dealer or call

1-800-487-5951.

STORAGE

a WARNING: Perform the following steps after each

use:

• Allow engine to cool, and secure the unit before storing

or transporting.

• Store unit and fuel in a well ventilated area where fuel

vapors cannot reach sparks or open ames from water

heaters, electric motors or switches, furnaces, etc.

• Store unit with all guards in place. Position unit so that

any sharp object cannot accidentally cause injury.

• Store unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be

used for 30 days or more.If your unit is to be stored for a

period of time:

• Clean the entire unit before lengthy storage.

• Store in a clean dry area.

• Lightly oil external metal surfaces.

PREPARING FUEL SYSTEM FOR STORAGE

Fuel stabilizer is an acceptable alternative in minimizing

the formation of fuel gum deposits during storage. Add

stabilizer to gasoline in fuel tank or fuel storage container.

Follow the mix instructions found on stabilizer container.

Run engine at least 5 minutes after adding stabilizer.

NOTE: During storage of your gas/oil mixture, the oil will

separate from the gas. We recommend that you shake the

gas can weekly to insure proper blending of the gas and oil.

PREPARING ENGINE FOR STORAGE

• Remove spark plug and pour 1 teaspoon of 50:1, 2-cycle

engine oil through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

• Replace spark plug with new one.

• Clean air lter.

• Check entire unit for loose screws, nuts, and bolts.

Replace any damaged, broken, or worn parts.

• At the beginning of the next season, use only fresh fuel

having the proper gasoline to oil ratio.

OTHER

• Do not store gasoline from one season to another.

• Replace your gasoline can if it starts to rust.

Rating

Let us know what you think about the Poulan PRB26 Leaf Blower by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Poulan PRB26 Leaf Blower?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Poulan PRB26 Leaf Blower. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Poulan PRB26 Leaf Blower. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Poulan. They might be able to provide an original manual. Are you looking for the manual of your Poulan PRB26 Leaf Blower in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.