Home > Garden & Terrace > Chainsaws > Poulan Chainsaws > Poulan PR4016 Chainsaw

Manual Poulan PR4016 Chainsaw

Name: Poulan PR4016 Chainsaw
Brand: Poulan
SKU: PR4016
Rating: 100 (1 reviews)

Need a manual for your Poulan PR4016 Chainsaw? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Instruction Manual

PR3816 / PR4016 / PR4218

Quick

Start Guide

WARNING! Read and follow all Safety Rules and

Operating Instructions before using this product.

Failure to do so can result in serious injury.

SAS

242



127(<RXUSURGXFWPD\GLIIHUVOLJKWO\IURPWKHLWHPVKRZQ



Mix 2.6 oz. of full synthetic 2-

Cycle Oil with 1 gallon of

gasoline for a 50:1 mixture.

Shake well. Pour into fuel tank.

CAUTION: Do not use alternate

fuels such as ethanol blends

above 10% by volume (E

-15, E

85) or any methanol blended

fuel.

Add bar and chain oil to oil tank

until full

Make sure chain brake is locked

by pushing forward on

handguard.

Slowly press

primer (air purge)

bulb 10 times.

Pull blue choke lever out fully.

Place right foot in rear handle as

shown. Using right hand, pull

starter rope sharply until machine

starts, or a maximum of 5 times.

Push blue choke lever to half

choke position.

NOTE: In temperatures above

90°F (32°C), push blue choke

lever completely in.

Pull starter

rope until engine

starts.

Allow engine to warm for 30

seconds. Squeeze throttle trigger

to set normal idle.

Before accelerating

to full

throttle, make sure chain brake is

unlocked by pulling back on

handguard.

Press red switch to STOP

position when finished using saw.

n Starting a Warm Engine

NOTE: If the product does not restart, the problem could

be overheated fuel.

To fix this problem, try the following procedure:

1. Set the product in a cool area away from direct sunlight.

2. Allow the product to cool for at least 20 minutes.

3. Press primer (air purge) bulb repeatedly for 10-

15 seconds.

4. Follow the cold starting procedure.

Repeat this procedure if the problem still exists.

NOTE: Always use fresh seasonal fuel and shorten

operatio

n time during unseasonably warm weather.

IMPORTANT:

· Never let your saw chain come in contact with soil/dirt

during operation. This will completely dull your chain

and will require installation of a new chain.

· Check your chain tension prior to each time you start

the chainsaw. Check tension on a new chain after the

first 15 minutes of operation. See the manual for chain

tensioning instructions.

Pul

115820549 Rev. B 2017-03-08

Rating

Let us know what you think about the Poulan PR4016 Chainsaw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Poulan PR4016 Chainsaw?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Poulan PR4016 Chainsaw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Poulan PR4016 Chainsaw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Poulan. They might be able to provide an original manual. Are you looking for the manual of your Poulan PR4016 Chainsaw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Poulan
Model	PR4016
Category	Chainsaws
File type	PDF
File size	4.55 MB

All manuals for Poulan Chainsaws
More manuals of Chainsaws

Frequently Asked Questions about Poulan PR4016 Chainsaw

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the right tension for the chain on my chainsaw? Verified

When pulling up the chains by hand it should be able to lift up to just above or under the guide bar.

This was helpful (775) Read more

Do I need to wear hearing protection when using a chainsaw? Verified

Yes you should. Although the amount of noise produced by a chainsaw can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (107) Read more

Do I need to wear eye protection when using a chainsaw? Verified

Yes. Small particles can fly up during sawing. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.

This was helpful (106) Read more