- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Check the contents of your package for the following parts:
Gigabit Ethernet
Switch x 1
5V DC, 1A Power
Adapter x 1
User's Manual
x 1
If any of these are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the
original packing material, and use them again to repack the
product in case there is a need to return it to us for repair.
Hardware
z Made from plastic, desktop size and wall-mount design
z LED indicators for system power, per port 1000 and Link/Act
z 5V DC, 1A external power adapter
z FCC, CE Class B compliant
Power
Notice
1. The device is a power-required device, meaning
it will not work till it is powered. If your
networks should be active all the time, please
consider using UPS (Uninterrupted Power
Supply) for your device. It will prevent you from
network data loss or network downtime.
2. In some area, installing a surge suppression
device may also help to protect your Switch
from being damaged by unregulated surge or
current to the Switch or the power adapter.
4. LED Indicators
System
LED Color Function
PWR Green
Light
Indicates that the Switch is
powered ON.
OFF
Indicates that the Switch is
powered OFF.
Per 10/100/1000Mbps port
LED Color Function
1000 Green
Light
Indicates that the port is operating
at 1000Mbps.
OFF
Indicates that the port is operating
at 10Mbps or 100Mbps.
Link/ACT Green
Light
Indicates the link through that
port is successfully established at
10/100/1000Mbps.
Blink
Indicates the Switch is actively
sending or receiving data over that
port.
2. Product Features
RJ45 Interface
z 5/8 10/100/1000Mbps Gigabit Ethernet ports
z Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-
TX, IEEE 802.3ab 1000BASE-T
z Supports auto MDI/MDI-X function
Switching
z Hardware-based 10/100Mbps, half/full duplex and 1000Mbps
full duplex mode, ow control and auto-negotiation
z Features Store-and-Forward mode with wire-speed ltering
and forwarding rates
z IEEE 802.3x ow control for full duplex operation and back-
pressure for half duplex operation
z Integrated address look-up engine, supporting 2K/4K abso-
lute MAC addresses (GSD-503/GSD-803)
z 9K jumbo packet size
z Power saving ability for Green networking
z Automatic address learning and address aging
z Supports CSMA/CD protocol
3. Switch Front Panel
Figures 3-1 and 3-2 show the front panels of GSD-503 and
GSD-803, respectively.
GSD-503
PWR
1 2 3 4 5
LNK/
ACT
1000
5-Port Gigabit Ethernet Switch
ACTLNK
Figure 3-1: GSD-503 Front Panel
GSD-803
PWR
1 2 3 4 5 6 7 8
LNK/
ACT
1000
8-Port Gigabit Ethernet Switch
LNK ACT
Figure 3-2: GSD-803 Front Panel
5. Switch Rear Panel
Figures 5-1 and 5-2 show the rear panels of GSD-503 and
GSD-803, respectively.
12345
ON
OFF
5V
, 1A max.
Figure 5-1: GSD-503 Rear Panel
ON
OFF
5V
, 1A max.
123458 7 6
Figure 5-2: GSD-803 Rear Panel
6. Installing the Switch
This part describes how to install your Gigabit Ethernet Switch
and make connections to it. Please read the following topics
and perform the procedures in the order being presented.
Note
This Switch does not need software configuration.
Desktop Installation
To install the Switch on desktop, simply follow the following
steps:
Step 1: Place the Switch on the desk near a power source.
Step 2: Keep some ventilation space between the Switch and
the surrounding objects.
Note
When choosing a location, please keep in mind
the environmental restrictions discussed in
Chapter 7 under Product Specifications.
Join the conversation about this product
Here you can share what you think about the Planet GSD-503 Switch. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.