Manual Philips YQ306 Shaver

Manual

Compliance with standards

- The shaver complies with the

internationally approved IEC safety

regulations and can be safely cleaned

under the tap (Fig. 3).

- The shaver complies with all applicable

standards and regulations regarding

exposure to electromagnetic elds.

General

- The adapter is equipped with an

automatic voltage selector and is

suitable for mains voltages ranging from

100 to 240 volts.

- The adapter transforms 100-240 volts

to a safe low voltage of less than 24 volts.

- Maximum noise level: Lc = 69dB(A)

General

- The adapter transforms 100-240 volts

to a safe low voltage of less than 24 volts.

General description (Fig. 4)

1 Protection cap

2 Shaving unit with shaving head holder

3 Shaving head holder release buttons

4 On/off slide

5 Retaining ring

6 Cutter

7 Shaving guard

8 Shaving head holder

9 Cleaning brush

10 Adapter

11 Charging light

12 Small plug

Charging

It takes approx. 10 hours to fully charge

the battery.

A fully charged shaver provides up to

20 shaving minutes.

If you have a heavy beard, the shaver may

provide less than 20 shaving minutes.

The number of shaving minutes may also

vary over time, depending on your shaving

behaviour, cleaning habits and beard type.

’Charging’ indication

- When the shaver is charging, the light

on the adapter lights up (Fig. 5).

Charging

Do not charge the shaver in the packaging.

1 Switch off the shaver.

2 Put the small plug in the shaver.

ENGLISH

Introduction

Congratulations on your purchase and

welcome to Philips! To fully benet from

the support that Philips offers, register your

product at www.philips.com/welcome.

Important

Read this user manual carefully before you

use the shaver. Save this leaet for future

reference.

Danger

- Keep the adapter dry (Fig. 1).

Warning

- The adapter contains a transformer.

Do not cut off the adapter to replace

it with another plug, as this causes a

hazardous situation.

- The shaver is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning

use of these appliances by a person

responsible for their safety.

- Children should be supervised to

ensure that they do not play with

the shaver.

- Always unplug the shaver before you

clean it under the tap.

Caution

- Never immerse the shaver in water

(Fig. 2).

- Do not use the shaver in the bath or in

the shower.

- Never use water hotter than 80°C to

rinse the shaver.

- Do not use the shaver or any other

part if it is damaged, as this may cause

injury. Always replace a damaged

adapter, charging stand or part with

one of the original type.

- Never use compressed air, scouring

pads, abrasive cleaning agents or

aggressive liquids such as petrol or

acetone to clean the appliance.

- Water may leak from the socket at the

bottom of the shaver when you rinse

it. This is normal and not dangerous

because all electronics are enclosed in

a sealed power unit inside the shaver.

3 Put the adapter in the wall socket.

, The light on the adapter lights up to

show that the shaver is charging.

Note: The light on the adapter does not

change colour and does not go out when the

shaver is fully charged.

Using the shaver

Note: This shaver cannot be used with the

power cord connected to the mains. If the

battery is empty, rst charge the shaver at

least 1 hour before use.

Shaving

Skin adaptation period

Your rst shaves may not bring you the

result you expect and your skin may even

become slightly irritated. This is normal.

Your skin and beard need time to adapt to

any new shaving system.

We advise you to shave regularly (at least

3 times a week) for a period of 3 weeks to

allow your skin to adapt to the new shaver.

During this period, use your new electric

shaver exclusively and do not use other

shaving methods. If you use different shaving

methods, it is more difcult for your skin to

adapt to the new shaving system.

1 Move the on/off slide upwards to

switch on the shaver.

2 Move the shaving heads over your

skin. Make both straight and circular

movements (Fig. 6).

3 Move the on/off slide downwards to

switch off the shaver.

4 Clean the shaver after every shave

(see chapter ‘Cleaning and

maintenance’).

Cleaning and maintenance

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as petrol

or acetone to clean the shaver and its

accessories.

- Clean the shaver after every shave.

- Clean the shaving heads frequently

with Philips Shaving Head Cleaning

Spray (HQ110) for optimal shaving

performance.

- You can clean the outside of the

shaver with a damp cloth. Do not clean

the shaving unit with a cloth.

Register your product and get support at

www.philips.com/welcome

YQ318, YQ308, YQ306, YQ300

4222.002.5718.2

4

1

2 3

5

6 7

8 9

10

11

12 13

14

15 16

17

18 19

20 21

22

23

24 25

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Philips YQ306 Shaver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Philips. They might be able to provide an original manual. Are you looking for the manual of your Philips YQ306 Shaver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Philips Shavers
More manuals of Shavers

Frequently Asked Questions about Philips YQ306 Shaver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.